Lorell LLR03189 User manual


INSTALLATION INSTRUCTIONS
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
Laptop Tray
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
LLR03189

LLR03189 Installation Instructions
2
DISCLAIMER
Lorell and its affiliated corporations and subsidiaries
(collectively “Lorell”), intend to make this manual accurate and
complete. However, Lorell makes no claim that the information
contained herein covers all details, conditions or variations, nor
does it provide for every possible contingency in connection
with the installation or use of this product. The information
contained in this document is subject to change without notice
or obligation of any kind. Lorell makes no representation of
warranty, expressed or implied, regarding the information
contained herein. Lorell assumes no responsibility for accuracy,
completeness or sufficiency of the information contained in this
document.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Lorell product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Lorell
product which is attached to a primary Lorell product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display, projector,
etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the LLR03189 up to (and
including) the laptop does not exceed 15 lbs (6.8 kg). Use
with products heavier than the maximum weight indicated
may result in collapse of the mount and its accessories
causing possible injury.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
--SAVE THESE INSTRUCTIONS--
DIMENSIONS
9.500
VENTILATION
16.00
406.4
9.50
241.3
DEPTH ADJUSTMENT
KNOB
EXTENSION
RAIL
DIMENSIONS: INCHES
[MILLIMETERS]

Installation Instructions LLR03189
3
PARTS
A (1)
[laptop tray]
B (4)
M4x12mm
ASSEMBLY AND INSTALLATION
1. Remove existing quick release faceplate from monitor arm
by pulling quick release lever and lifting faceplate from arm.
(See Figure 1)
Figure 1
2. Use four M4x12mm Phillips pan machine screws (B) to
attach laptop tray (A) to removed faceplate. (See Figure 2)
Figure 2
3. Slide laptop tray (A) onto mounting head until quick release
tab clicks into place. (See Figure 3)
4. Adjust mounting arm and tray to desired mounting level. See
monitor arm installation instructions for adjustment details.
(See Figure 3)
Figure 3
5. Turn extension rod tension adjustment knob counter-
clockwise to decrease tension. (See Figure 3)
6. Extend laptop extension rod as desired. (See Figure 3)
7. Turn extension rod tension adjustment knob clockwise to
tighten extension rod in place.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the LLR03189 up to (and
including) the laptop does not exceed 15 lbs (6.8 kg). Use
with products heavier than the maximum weight indicated
may result in collapse of the mount and its accessories
causing possible injury.
8. Center laptop on tray and adjust pitch tension as needed to
hold tray in desired position. (See Figure 3)
quick release lever
1
1
(A)
removed faceplate
(B) x 4
2
3
extension rod
7
5
5
(A)
pitch tension
adjustment
8

LLR03189 Installation Instructions
8800-003254 Rev00
01/2021