ProSoCoustic DS Series User manual

Thank you for purchasing: CS1F
Desktop Stand for
Softube Console 1 and Fader
PARTS LIST
A: Vertical Panel (Left) B: Vertical Panel (Right) C: Bottom Shelf D: Top Shelf
E: Allen Screw (x8) F: Allen Wrench
(DO NOT USE POWER TOOLS)Softube Console 1 (Sold Separately)Softube Console 1 Fader (Sold Separately)
1.
A
C
EE
1a. Attach Vertical Panel Le (A) to Bottom Shelf (C)
using x2 Allen Screws (E)
1b. Attach Vertical Panel Le (A) to Top Shelf (D)
using x2 Allen Screws (E)
E
E
D
2.
2. Lay Vertical Panel Le (A) at on a sturdy surface
with the shelves facing up. Insert your Console 1 Fader
into the bottom slot, and your Console 1 into the top
slot.
*Make sure to hold your Console 1 and Fader in place to ensure they don’t fall. *
*e rubber feet on the bottom of the Console 1 and Fader may need to be removed for the best t.*

3.
B
EE
E E
3a. Place Vertical Panel Right (B) on top, inserting
Console 1 and Fader into the slots.
3b. Squeeze shelves (C and D) tightly into the
Console 1 and Fader until screw holes are visible
through Vertical Panel Right (B)
3c. Attach Vertical Panel Right (B) to shelves
(C and D) with x4 Allen Screws (E)
4.
4. Turn right-side-up, plug in your Console 1 and
Fader, and enjoy!
© 2020 ProSoCoustic. All Rights Reserved. ProSoCoustic is owned and operated by Full Scale AV,
a division of Techrep Marketing LLC.
Soube Console 1, Soube Console 1 Fader, Soube, and the Soube Logo are owned by Soube Inc.
Designed and Manufactured in North Canton, Ohio
ProSoCoustic/Full Scale AV
701 Murfreesboro Pike, Suite 200
Nashville, TN 37210
www.prosocoustic.com