
Step 1
Bottom Braces
Locate the foot Fwith the four holes on the
bottom. Attach this foot to the bottom braces D
as shown. For each brace use two M6 x 30
socket screws H.
Fasten the other foot to the braces on the opposite
side. Lay the bottom of the stand on the floor. If
it wobbles, check to see if the bottom braces are
installed correctly.
Step 2
Side Arms to Bottom
Fasten the side arms Eto the top of the feet using
the two M6 x 15 hex socket screws Gwith washers
Kand the two nylon filled cap nuts J. Be careful to
not overtighten. The side arms should collapse into
the bottom with relative ease.
Step 3
Guitar Tree to Side Arms
Attach the guitar tree Cto the top of the side arms
Ewith two M6 x 35 socket screws I(one through
the top of the guitar tree directly above each
side arm.) Then, secure it with a washer Kand
cap nut J.
ASSEMBLY
D
F
H
E
G
JK
C
E
I
KJ