Pulsar ARAS800 User manual

INSTALLATION GUIDE
ENGLISH
Code: ARAS800
Name: ARAD rails dedicated for RACK19"
cabinets - 800mm depth
IM ARAS800
Edition: 4 from 30.01.2017
Supersedes: 3 from 07.12.2015
EN
1. Intended use:
The ARAS800 rail is intended for mounting RACK enclosures, type: ARAD2/ ARAD3/ ARAD4 in a 800mm deep
RACK 19” cabinet.
2. Specifications.
SPECIFICATIONS
Mounting dimensions:
H=1U, D=512÷703 [mm, +/-2]
Net / gross weight:
2,84 / 2,97 [kg]
Static load:
30kg
Notes:
- four-point butt mounting to RACK profiles + supported on front and rear RACK profiles
- 4 M6 screws + cage nuts included
- 6 M4 screws included –to bolt the RACK enclosure
Materials:
- sheet metal DC01, 1mm thick, RAL9005
- sliding rails –fully extendable
Use:
inside
Declarations, warranty:
CE, 2 year from the production date

2
3. Assembling instructions:
3.1. Mount the M6 cage nuts to the RACK cabinet, as shown in the picture below. Then, mount the ARAS rails.
Take notice of the correct positioning of the horizontal rails. Adjust their length between the front and back RACK
profiles.
3.2. Place the ARAD enclosure onto the slid-out ARAS rails. Next, bolt it from the inside with M4 screws
(included). The enclosure is to be fixed to the front part of the RACK rails with four 4xM6 screws.
MANUFACTURER
Pulsar
Siedlec 150,
32-744 Łapczyca
Tel. [phone], Fax. [phone]
e-mail: biur[email protected], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl