PURE Jongo T2 User manual

Quick start guide
T2, T4
Jongo_T2_T4_QSG-Bear-US-v1.indb 1 9/2/2014 11:31:46 AM

Jongo_T2_T4_QSG-Bear-US-v1.indb 2 9/2/2014 11:31:46 AM

1
ENGLISH
ES
FR
Thank you for choosing Jongo T2, T4. This quick
start guide will get you up and running in no time.
If you need more help setting up your Jongo, you
can access our online help in the Pure Connect
app or watch our Jongo setup video at:
www.pure.com/jongo-setup-video
T2, T4
Jongo_T2_T4_QSG-Bear-US-v1.indb 1 9/2/2014 11:31:48 AM

2
Jongo T2/T4 safety instructions
1. Read these instructions – All the safety and operating instructions should be read before this product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Only use attachments/accessories specified by the manufacturer.
10. Unplug the apparatus during lightning storms or when unused for long periods of time.
11. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
12. WARNING: Please refer to the information on the rear of the enclosure for electrical and safety information before
installing or operating the apparatus. If you are installing Jongo with the removable stand in portrait mode, this
information can be located behind the trim panel.
13. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The
apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall
not be placed on apparatus.
14. WARNING: The direct plug-in adapter is used as disconnect device, the disconnect device shall remain readily
operable.
15. Use only power supplies listed in the user instructions (Jongo T2 with model no. PSAA30R-150, manufactured
by Pure) (Jongo T4 with model no. CPS065A180361, manufactured by Pure).
16. Mains power supply
Jongo T2: Switching adapter: Input: AC 100 - 240V~, 50/60 Hz, 0.8A; Output: DC 15V, 2A
Main unit: DC 15V , 2A
Jongo T4: Switching adapter: Input: AC 100 - 240V~, 50/60 Hz, 1.6A; Output: DC 18V, 3.61A
Main unit: DC 18V , 3.61A
17. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that
it does not require a safety connection to electrical earth.
Jongo_T2_T4_QSG-Bear-US-v1.indb 2 9/2/2014 11:31:48 AM

EN
3
Power up Jongo
Connecting Jongo to Wi-Fi
A
Insert the connector of the supplied AC lead into Jongo (A) and switch Jongo
on .
Jongo_T2_T4_QSG-Bear-US-v1.indb 3 9/2/2014 11:31:52 AM

4
Download the Pure Connect app
If you already have the Pure Connect app, check on the Apple App Store
or Google Play to see that you have the latest version and then skip to the
next page.
Search for the Pure Connect app on the Apple App Store or Google Play from
your phone or tablet.
Don’t have an Android or iOS device?
To find out how to play music to your Jongo from another device,
e.g. a Blackberry, Windows Phone or PC, visit our support site at:
support.pure.com/us
Jongo_T2_T4_QSG-Bear-US-v1.indb 4 9/2/2014 11:31:54 AM

EN
5
Open the Pure Connect app and sign in
Connect Jongo to your Wi-Fi
To make the most of your Jongo you
really need to create a free Pure Connect
account. You can create a Pure Connect
account using your Facebook account or
your e-mail address*.
The first time you sign in to the app, you
will see an option to connect Jongo to
your Wi-Fi. Simply tap
Set up a Jongo
and follow the prompts on screen to
connect Jongo to your Wi-Fi.
Sign in with Facebook
Sign in
Start listening
Skip Jongo Setup
Set up a Jongo
What would you like to do?
Tap above to connect a Jongo to your Wi-Fi
now, or do it later by going to ‘Settings’.
Back Welcome
*If you are using the iOS Pure Connect app, you will need to visit connect.pure.com to create an account using your e-mail address.
Jongo_T2_T4_QSG-Bear-US-v1.indb 5 9/2/2014 11:32:02 AM

6
If you have already connected a Jongo to your Wi-Fi, follow the steps below to add
another Jongo to your Wi-Fi.
A. Open the Pure Connect app and sign in.
B. Open the Settings menu.
C. Tap Set up a Jongo and follow the prompts on screen.
Adding another Jongo to
your Wi-Fi
Sign out
My devices
1 Jongo available ›
Set up a Jongo ›
Help and support
Help Center ›
Take the tour ›
Terms and conditions ›
C
Jongo_T2_T4_QSG-Bear-US-v1.indb 6 9/2/2014 11:32:02 AM

Suggestion for you
Recent played
2014 Anthems (Album...
Ministry of Sound
0:00/4:16
Favorite stations
Recommended
more music variety
Pharrell rocks!
Rediscover sco...
2014 Anthems
3 Jongo devices discovered
Jongo Kitchen
Jongo T2 Bedroom
Jongo T4 Kids room
C
B
A
EN
7
You can use the Pure Connect app to play music using Wi-Fi and manage various
settings, including the volume, stereo pairing and software updates.
Playing music from the
Pure Connect app
A. Open the Pure Connect app.
B. Tap in the player bar to view a list of available speakers.
C. Switch on the speakers that you want to stream to.
D. Select the music that you want to play.
Jongo_T2_T4_QSG-Bear-US-v1.indb 7 9/2/2014 11:32:13 AM

Suggestion for you
Recent played
2014 Anthems (Album...
Ministry of Sound
0:00/4:16
Favorite stations
Recommended
more music variety
Pharrell rocks!
Rediscover sco...
2014 Anthems
3 Jongo devices discovered
Jongo Kitchen
Jongo T2 Bedroom
Jongo T4 Kids room
C
A
B
8
Playing music from other apps
Jongo Kitchen
Volume
Edit name
Bluetooth Caskeid
– +
Settings
D
If your speakers are connected to Wi-Fi, you can use Bluetooth Caskeid to stream
content from other music services, such as Spotify and Pandora, to all of your speakers.
A. Open the Pure Connect app.
B. Tap in the player bar to view a list of available speakers on your network.
C. Tap next to the speaker that you want to stream to .
D. Switch Bluetooth Caskeid on and return to the previous screen.
E. Repeat steps B to D for each speaker that you want to play music on.
F. Enable the Bluetooth option on your mobile device and search for Bluetooth devices.
G. Pair to one of your speakers. If your device requires a key, enter ‘0000’.
H. Open the music streaming service that you want to listen to and play a track.
Back
Don’t have an Android or iOS device?
To find out how to play music to your Jongo from another device,
e.g. a Blackberry, Windows Phone or PC, visit our support site at:
support.pure.com/us
Jongo_T2_T4_QSG-Bear-US-v1.indb 8 9/2/2014 11:32:19 AM

EN
9
Troubleshooting
Why does the power light on my Jongo change color?
The power light on the front of Jongo is used to tell you about Jongo’s status. The list
below explains some of the common colors that you may see when setting up and using
your Jongo.
Green (steady): Jongo is ready to play your music or is already playing a track.
Green (pulsing): Jongo is in Wi-Fi setup mode (you’ll see this when powering up your
Jongo for the first time) or Jongo is busy. The power light will turn steady green when
Jongo is ready to play your music.
Amber (steady): Jongo is in sleep mode. Jongo will automatically wake up and play music
when you try to play a track from your smartphone or tablet.
Red (flashing): Jongo cannot connect to your Wi-Fi. Check that you are within range of
your Wi-Fi network and that you have entered the correct password (matching any upper
and lower case letters) and run Jongo Setup again. To get more help with setting up your
Wi-Fi, visit our support site at support.pure.com/us.
Jongo_T2_T4_QSG-Bear-US-v1.indb 9 9/2/2014 11:32:19 AM

10
No Wi-Fi detected
This message will appear if your mobile
device is not connected to a Wi-Fi
network. Check the Wi-Fi settings on
your mobile device to see if you are
connected to a Wi-Fi network and then
tap Try again.
Setup failed
This message will appear if there was
a problem during Jongo setup. One
common reason for this message to be
displayed is an incorrect Wi-Fi password.
Tap Try again to try setting up your
Jongo again.
Back Back
Jongo setup Jongo Setup
No Wi-Fi detected. Please connect your
mobile device to the Wi-Fi network that you
want to set up your Jongo on.
Jongo 12345
Setup failed
Online help
Try again Try againCancel Cancel
Why did Jongo Setup not work?
If there was a problem during Jongo Setup, the Pure Connect app will display an error
message to help you troubleshoot the problem.
Need more help?
If you need more help setting up your Jongo, you can visit our support site at:
support.pure.com/us
Jongo_T2_T4_QSG-Bear-US-v1.indb 10 9/2/2014 11:32:19 AM

Speakers 2 full-range 3" drive units
Audio output 2 x 10W RMS
Input connectors 15V DC power adaptor socket (110-230V supplied), 3.5mm
line-in for auxiliary devices.USB A for product upgrades and
Ethernet connectivity (optional adapter available)
Controls Power, Vol+, Vol-, Mute, Wi-Fi setup, Reset
Network Wi-Fi: 802.11b and 802.11g supported with WEP and
WPA/WPA2
Ethernet (requires optional adapter): 10/100 Mbps
Bluetooth: A2DP supported
Codec support Includes WMA (Standard V9), AAC, MP3, MP2
Mains power supply Adapter:
Input 100-230V AC, 50/60Hz, 0.5A;
Output 15V DC, 1500mA
Main unit: 15V DC, 1500mA
Dimensions 9.8" (250 mm) wide x 4.7" (120 mm) deep x 5.9" (150 mm)
high
Weight 2.7 lbs (1.104 kg)
Approvals CE marked. Hereby, Pure, declares that this Band II LPD
device is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. The
Declaration of Conformity may be consulted at:
http://www.pure.com/R&TTE-DoC
Australian C-Tick N1600 and Electrical Safety
Technical specifications
Jongo T2
EN
11
Jongo_T2_T4_QSG-Bear-US-v1.indb 11 9/2/2014 11:32:19 AM

Jongo T4
Speakers 2 full-range 3" drive units
Audio output 2 x 25W RMS
Input connectors 18V DC power adaptor socket (110-230V supplied), 3.5mm
line-in for auxiliary devices. USB Type A for product updates
and Ethernet connectivity (optional adapter available)
Controls Power, Vol+, Vol-, Mute, Wi-Fi setup, Reset
Network Wi-Fi: 802.11b and 802.11g supported with WEP and
WPA/WPA2
Ethernet (requires optional adapter): 10/100 Mbps
Bluetooth: A2DP supported
Codec support Includes WMA (Standard V9), AAC, MP3, MP2
Mains power supply Adapter:
Input 100-240~V AC, 50/60Hz, 1.6 A;
Output 18V DC, 3.61A
Main unit: 18V DC, 3.61A
Dimensions 12" (305 mm) wide x 5.7" (146 mm) deep x
6.89" (165 mm) high
Weight 6.6 lbs (3 kg)
Approvals CE marked. Hereby, Pure, declares that this Band II LPD
device is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. The
Declaration of Conformity may be consulted at:
http://www.pure.com/R&TTE-DoC
Australian C-Tick N1600 and Electrical Safety
12
Jongo_T2_T4_QSG-Bear-US-v1.indb 12 9/2/2014 11:32:19 AM

EN
13
FCC NOTICE TO A USER IN THE UNITED STATES
Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement
Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from
all persons.
IC NOTICE TO A USER IN CANADA
Since digital circuitry may cause interference to other radio or television tuners nearby, switch this unit
off when not in use or move it away from the affected radio/television tuner.
Note: This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These
limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television operation (which
can be determined by turning the equipment off), the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio / TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Jongo_T2_T4_QSG-Bear-US-v1.indb 13 9/2/2014 11:32:19 AM

14
Warranty information
Imagination Technologies Limited warrants to the end user that this product will be free from
defects in materials and workmanship in the course of normal use for a period of three years from
the date of purchase. This guarantee covers breakdowns due to manufacturing or design faults; it
does not apply in cases such as accidental damage, however caused, wear and tear, negligence,
adjustment, modification or repair not authorized by us. Should you have a problem with your unit
please contact your supplier or contact Pure Support at http://support.pure.com/us.
Disclaimer
Imagination Technologies Limited makes no representation or warranties with respect to the
content of this document and specifically disclaims any implied warranties of merchantability or
fitness for any particular purpose. Further, Imagination Technologies Limited reserves the right to
revise this publication and to make changes in it from time to time without obligation of Imagination
Technologies Limited to notify any person or organization of such revisions or changes.
Trademarks
Jongo, Pure, the Pure logo, Imagination Technologies, and the Imagination Technologies logo are
trademarks or registered trademarks of Imagination Technologies Limited.
Caskeid is a superior synchronization technology, providing clear multi-speaker wireless audio.
Caskeid and the Caskeid logo are trademarks or registered trademarks of Imagination Technologies.
Copyright
Copyright © 2014 Imagination Technologies Limited. All rights reserved. No part of this publication
may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated
into any human or computer language, in any form or by any means, electronic, mechanical,
magnetic, manual or otherwise, or disclosed to third parties without the express written permission of
Imagination Technologies Limited. Version 1 September 2014.
Disposal of Waste Electrical & Electronic Equipment
This symbol on the product or on its packaging indicates that this product should not
be treated as household waste. Instead it should be handed over to a suitable collection
point for the recycling of electrical and electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact your local
council office, your household waste disposal service or the shop where you purchased
the product.
Jongo_T2_T4_QSG-Bear-US-v1.indb 14 9/2/2014 11:32:19 AM

EN
FRANÇAIS
ES
1
Merci d'avoir choisi l'enceinte Jongo T2, T4.
L'objectif de ce guide de démarrage rapide est de
vous permettre de mettre en service votre enceinte
en un rien de temps. Si vous avez besoin d'aide pour
configurer votre Jongo, vous pouvez accéder à notre
aide en ligne à partir de l'application Pure Connect
ou regarder notre vidéo de configuration de Jongo
à l'adresse:
www.pure.com/jongo-setup-video
T2, T4
Jongo_T2_T4_QSG-Bear-US-v1.indb 1 9/2/2014 11:32:24 AM

2
Instructions de sécurité relatives au Jongo T2/T4
1. Veuillez lire les présentes instructions – vous devez lire toutes les instructions de sécurité et d’utilisation avant
d’utiliser cet appareil.
2. Veuillez conserver les présentes instructions – vous devez conserver les instructions de sécurité et d’utilisation
en lieu sûr pour toute référence ultérieure.
3. Veuillez respecter tous les avertissements – vous devez respecter tous les avertissements figurant sur l’appareil
ou dans le mode d’emploi.
4. Veuillez suivre toutes les instructions – vous devez suivre toutes les instructions d’utilisation.
5. N’utilisez pas cet appareil à proximité d’un point d’eau.
6. Nettoyez l’appareil uniquement avec un chiffon sec.
7. Les orifices d’aération ne doivent pas être obstrués. Installez l’appareil conformément aux instructions du
fabricant.
8. N’installez pas l’appareil à proximité de sources de chaleur, telles que les radiateurs, bouches de diffusion d’air
chaud, poêles, ou tout autre appareil (y compris des amplificateurs) produisant de la chaleur.
9. N’utilisez que des fixations/accessoires spécifiés par le fabricant.
10. Débranchez l’appareil en cas d’orages ou avant toute inutilisation prolongée.
11. Faites exécuter toutes les tâches de service après-vente par des techniciens qualifiés. Contactez ce service
lorsque l’appareil a été endommagé (cordon d’alimentation ou prise, par exemple), qu’il ne fonctionne pas
normalement ou qu’il est tombé.
12. AVERTISSEMENT Veuillez lire les informations indiquées en-dessous de l’appareil concernant les branchements
électriques et la sécurité avant d’installer ou de mettre l’appareil en marche. Si vous installez Jongo avec le
support amovible en mode portrait, cette information peut être situé derrière le panneau de garniture.
13. AVERTISSEMENT Afin de réduire le risque d’incendie ou de choc électrique, n’exposez pas l’appareil à la pluie ni
à l’humidité. N’exposez pas cet appareil à des éclaboussements ni à des gouttes d’eau ; ne placez aucun objet
contenant du liquide (tel qu’un vase) sur l’appareil.
14. AVERTISSEMENT : l’adaptateur directement enfichable est utilisé comme appareil de sectionnement l’appareil
de sectionnement doit être prêt à fonctionner à tout moment.
15. Utilisez cet appareil uniquement sur des tensions secteur conformes à celles spécifiées dans le guide de
l’utilisateur (Jongo T2 en utilisant la référence PSAA30R-150, fabriquée par Pure) (Jongo T4 en utilisant la
référence CPS065A180361, fabriquée par Pure).
16. Alimentation secteur
Jongo T2 : Adaptateur : Entrée 100-240 VCA, 50/60 Hz, 0,8 A ; Sortie 15 VCC, 2 A
Unité principale : 15 VCC , 2 A
Jongo T4 : Adaptateur : Entrée 100-240 VCA, 50/60 Hz, 1,6 A ; Sortie 18 VCC, 3,61 A
Unité principale : 18 VCC , 3,61 A
17. Cet appareil est de classe 2 ou dispose d’un équipement à double isolation électrique. Il a été conçu de
sorte à ne requérir aucune connexion de sécurité pour la mise à la terre.
Jongo_T2_T4_QSG-Bear-US-v1.indb 2 9/2/2014 11:32:24 AM

FR
3
Connexion du Jongo au
réseau Wi-Fi
Mettez le Jongo en marche
A
Insérez le connecteur du câble électrique fourni dans le Jongo (A) et mettez
l’appareil sous tension .
Jongo_T2_T4_QSG-Bear-US-v1.indb 3 9/2/2014 11:32:33 AM

4
Téléchargez l'application Pure Connect
Si vous avez déjà téléchargé l'application Pure Connect, vérifiez que vous
possédez bien la dernière version à partir de l'App Store d'Apple ou de
Google Play puis passez à l'étape suivante.
Cherchez l'application Pure Connect sur votre téléphone ou votre tablette
à partir de l'App Store d'Apple ou de Google Play.
Vous n'avez pas d'appareil Android ou iOS?
Pour savoir comment écouter de la musique avec votre enceinte Jongo
depuis un autre appareil tel qu'un Blackberry, un Windows Phone ou un PC,
visitez notre site de support technique à l'adresse:
support.pure.com
Jongo_T2_T4_QSG-Bear-US-v1.indb 4 9/2/2014 11:32:37 AM