pyroscience HS1 User manual

Version V1.5 www.pyroscience.com
Heavy Stand HS1
Light Stand LS1
STABLE LABORATORY STAND FOR
MICROMANIPULATORS
INSTRUCTION MANUAL

HS1 & LS1| Manual
© PyroScience GmbH 2
Heavy Stand HS1
Light Stand LS1
STABLE LABORATORY STAND FOR
MICROMANIPULATORS
Document Version 1.05
The HS1 and the LS1 are provided by:
PyroScience GmbH
Hubertusstrasse 35
52064 Aachen
Germany
Phone +49 (0)241 5183 2210
Fax +49 (0)241 5183 2299
Email info@pyroscience.com
Web www.pyroscience.com
Registered: Aachen HRB 17329, Germany

HS1 & LS1| Manual
© PyroScience GmbH 3
TABLE OF CONTENT
1Introduction.....................................................................................................................................4
1.1 Packing List........................................................................................................................................4
1.2 Overview ............................................................................................................................................5
2Safety Guidelines............................................................................................................................6
3Assembly and Operation ..............................................................................................................7
4Maintenance ....................................................................................................................................9
5Technical Specifications............................................................................................................. 10

HS1 & LS1| Manual
© PyroScience GmbH 4
1INTRODUCTION
1.1 Packing List
Please check that all following items are included in your package:
•1x Base
•1x Main post
•4x Mounting nuts (already mounted in the main post)
•2x Mounting Rods
•1x Socket screw
•1x Socket wrench
Figure 1: Overview of the parts included in the package. Note that the exact appearance of
some delivered items might differ to this photograph.

HS1 & LS1| Manual
© PyroScience GmbH 5
1.2 Overview
Figure 2: The Heavy Stand HS1 shown together with a mounted Micromanipulator MU1 from
PyroScience.
The Heavy Stand HS1 has been especially developed for microsensor measurements. Its
heavy aluminium base and rigid aluminium post provide a stable and vibration-free
support for standard micromanipulators (e.g. Micromanipulator MU1 from PyroScience).
The triangular base ensures a wobble-free stand on any surface. Micromanipulators can
be mounted on all four sides of the main post. The mounting position is continuously
adjustable due to the sliding mounting nuts (M6 thread). Two additional mounting rods
(12 mm in diameter) simplify the fixation of samples. All parts are composed of
aluminium or stainless steel, making the Heavy Stand HS1 very resistive to aggressive
liquids (e.g. seawater or acids). The aluminium base is additionally varnished with black
industrial powder-coating.

HS1 & LS1| Manual
© PyroScience GmbH 6
2SAFETY GUIDELINES
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE STARTING TO WORK
WITH THIS DEVICE
•Maintenance, modifications and repair work must only be carried out by a suitable,
qualified technician.
•If there is any reason to assume that the instrument can no longer be employed
without a risk, it must be set aside and appropriately marked to prevent any further
use.
•The safety of the user may be endangered, e.g. if the instrument a) is visibly
damaged, b) no longer operates as specified, c) has been stored under adverse
conditions for a longer period.
•If there is any doubt, you should send the instrument back to PyroScience for repair.
•The user has to ensure the following laws and guidelines:
oEEC directives for protective labor legislation
oNational protective labor legislation
oSafety regulations for accident prevention
THIS DEVICE MAY ONLY BE OPERATED BY QUALIFIED PERSONAL:
This device is only intended for use in the laboratory by qualified personal
according to this instruction manual and these safety guidelines!
Keep this device out of the reach of children!
This device is not intended for medical or military purposes!

HS1 & LS1| Manual
© PyroScience GmbH 7
3ASSEMBLY AND OPERATION
Please follow these steps for assembling the Heavy Stand HS1:
1. Put the socket screw through the hole in
the base and insert it into the open end of
the main post.
2. Use the included socket wrench and
fasten the socket screw securely.
3. Screw the two mounting rods into
the corners of the base.

HS1 & LS1| Manual
© PyroScience GmbH 8
4. Completely assembled stand.
5. There are four mounting nuts integrated in the
grooves on either side of the main post. They provide
a M6 thread for mounting micromanipulators. The
mounting nuts are spring loaded; their vertical
position can be adjusted by sliding them up and down.
(A mounting nut might get displaced from the centre
of the groove. In that case, simply push it back into
the centre with your fingers)
6. Only for HS1: In order to compensate any uneven
underlay, each of the three knurled screws at the
bottom can be adjusted ±15 mm.

HS1 & LS1| Manual
© PyroScience GmbH 9
4MAINTENANCE
Periodically, you should treat the threads of the screws and nuts with a small amount of
grease. In order to protect all other parts of the HS1 in aggressive environments (e.g.
seawater), you might coat them thinly with a Teflon spray.

HS1 & LS1| Manual
© PyroScience GmbH 10
5TECHNICAL SPECIFICATIONS
Technical Specifications
Weight
10 kg HS1 / 4.5 kg LS1
Dimensions
560 / 535 mm x 400 mm x 360 mm (H
x W x D)
Dimensions of main post
500 mm x 60 mm x 60 mm (H x W x D)
Dimension of mounting rods
500 mm in length, Ø 12 mm
Thread in mounting nuts
M6
Material
Aluminum (screws: stainless steel)

HS1 & LS1| Manual
CONTACT
www.pyroscience.com
PyroScience GmbH
Hubertusstraße 35
52064 Aachen
Deutschland
Tel.: +49 (0)241 5183 2210
Fax: +49 (0)241 5183 2299
info@pyroscience.com
www.pyroscience.com
This manual suits for next models
1
Table of contents