qpcom QP-WR254G User manual

Quick Install Guide
Check for Packing List
1. One Wireless G BroadBand Router
2. One Power Adapter
3. One Ethernet Network Cable
4. On e Se t -u p CD- RO M wi th Us er ’s
Manual
5. One Quick Installation Guide
1Before you begin, ensure that the Wireless Router, the
DSL/Cable modem supplied by your IP Provider, and PC
2
Connect an Ethernet cable to one of the ports
on the back of the Wireless Router to the Ethernet
3
Connect your DSL/Cable Modem to the Internet port
on the Wireless R outer using a standard RJ-45
4Turn on the DSL/Cable modem first.
5Then turn on your wireless router .
6Check the LEDs:
7Turn on your PC.
Notes
Restart your computer ..
8For Windows 2000 & XP users, your computer should
obtain an IP Address automatically from the Wireless
Router's DHCP Server, after you've done the above
steps and restarted your computer
For Windows 2000 & XP
For Windows 98 / ME / Macintosh
Please refer to the User's Guide found on the CD.
ARM914
To PCs
ADSL/Cable
Modem
Existing Connection
Subscribed line
Power
To Internet
QP-WR254G
802.11 b/g Wireless Router
1
Aplication Diagram
Connect the 802.11g Wireless Router
2
Router Configuration (for Internet Access)
2
www.qpcom.com
Before setting up the Wireless Router, make sure your Pcs are
configured to “obtain an IP or (TCP/IP) address
automatically”.
Click start click Control Panel Network and
Internet connections (Right- click on) Local area
Connection Properties
Make sure the box next to Internet Protocol (TCP/IP) is checked.
Click the Internet Protocol (TCP/IP) and
Select “Obtain an IP address automatically”.
Select “Obtain DNS server address automatically”.
Then click OK to complete the PC configuration.
The Power, Internet and W LAN LEDs should be ON
For each active LAN (PC) connection, the LAN
LAN

The Setup Wizard provides primary conf iguration of this
device, you may enter each screen to change the default
settings.
Note
9Start your WEB browser.
In the Address box, enter
the following:
No username and password required for the first login
(def ault setting). However, you can assign a set of
username and password for future security.
10
Type of Internet
Access
Connection
Type Data Required
None
Usually none. But some ISP may
require a particular Hostname,
Domain name, or MAC (physical)
address.
PPPoE Login name and password.
L2TP
Login name and password,
Server IP Address
PPPoE Login name and password
PPTP
Login name and password,
Server IP Address
L2TP
Login name and password,
Server IP Address
DSL/ADSL modem
(phone-type cable) None
Usually none. But some ISP may
require a particular Hostname,
Domain name, or MAC (physical)
address.
Other (e.g. Fixed
Wireless)
Please choose one of the two ways for your
Internet Connection: Dynamic IP Address
assignment.
Cable modem (TV-
style cable)
www.qpcom.com
M73-APO11-170