1 Quadralite A1 and Quadralite Photo App are compatible with following smartphones:
iPhone 5s, iPhone 6s, iPhone 6s Plus, iPhone 7, iPhone 7 Plus. This list contains only tested
models and not all iPhones. If your phone is not mentioned here self-test is highly
recommended.
2 Quadralite A1 is fully compatible with all Quadralite Navigator X and Godox X system
devices.
protection for example left in a closed car in direct sunlight or close to high temperature
sources could result in fire, damage of the cover or internal components.
The device must not be used in highly dust conditions and when there is a risk of
contact with flammable liquids and vapors. Disobeying given advice may result a
damage to the device or even a possibility of fire.
Flash is designated to be used and stored in dry and well ventilated closed spaces.
The flash may heat up during work. It is normal, especially when it is often triggered on
max flash output. After 50 subsequent full power flashes, it is advised to make a 10
minute break to cool down flash bulb and lamp internal components. Disobeying given
advice results in overheating the device and damage.
Do not fire flash directly into the eyes or in the short distance from them! Ignoring the
above safety rule may cause temporary or permanent damage to the eyes.
Keep out of the reach of children! The flash contains small parts which may pose the
risk of suffocation. If swallowed, seek medical advice immediately.
Built-in Bluetooth 4.0 module for communication with smartphones via Quadralite Photo
App up to 50m transmission distance
Can be used as smartphone off-camera flash, LED light or wireless studio lights
controller
Built-in 2.4GHz Quadralite Navigator X wireless system transceiver (device can be use
as Slave or Master unit)
Safety
The gate to the world of studio photography. This is the shortest description of this unique
product that we can come up with. Small, compact and affordable accessory that can really
extend your smartphone1capabilities and gives you a lot of new ideas and opportunities to
shoot better photos.
A1 is equipped with 1W LED lamp and can be used as a small and portable light source for
your smartphone, however this is not the most important feature of this unique device. First
of all, A1 is a standalone 8Ws flash unit, that can be wireless synchronized with smartphone
camera and this is a huge step-up. More controllable light source you can use equals more
creativity and uniqueness.
Moreover A1 stands out for its full integration with advanced and complex Quadralite and
Godox wireless flash system. There is only one condition: you have to install Quadralite
Photo App on your smartphone. This tandem will ultimately transform your phone into
a professional studio camera. Finally you will be able to use additional lights with ease in
studio, on location or anywhere you want.
A1 can be used as:
1. Independent wireless flash unit that make your photos better anywhere and anytime.
2. LED continuous light source
3. Wireless trigger of Quadralite lights (including flashes and LED’s) for more opportunities
and creativity boost.
4. Easy to use and convenient wireless controller of Quadralite lights thanks to specially
developed app that will turn your smartphone into a studio command center2.
Features:
To avoid the device damage and also threat to health of its users it is an obligation to read
thoroughly the manual instruction and absolutely obey the rules included.
This is high voltage device! Do not disassemble and modify! Even after disconnecting
the device from power source and turning it off, inside its internal components
high-voltage current still occurs. Disassembling of the cover can be performed only by
the authorized Quadralite service. Maintenance of the device must be performed by our
authorized maintenance department. Unauthorized service will void the warranty.
If the cover is damaged, eg. in consequences of fall, it is advised to send the device to
authorized service center for inspection and repair (if necessary).
Keep it dry! Do not use the device with wet hands, do not immerse in water, do not
expose to snow or rain. Ignoring above mentioned safety instructions could result with
electric shock, short circuit of fire.
Flash is designed to work in temperature from +10ºC to +50ºC degrees. Exceeding
this scope could result in incorrect functioning of the device or could lead to overheat
and damage.
Do not expose the device on high temperatures! Leaving the device without proper
Built-in 433MHz Quadralite LED Remote for Thea LED panels
Lightweight, compact and portable with integrated 1Ah lithium-ion battery
1 W LED modeling light and 8Ws of flash energy with 5 steps adjustment (1/1 – 1/16)
Stable color temperature of 6000K±200K
3/8" thread and magnetic patch for fast and easy mounting
•
•
•
•
•
- 02 -
