R/Evolution 87 User manual

INSTRUCTION MANUAL
Stop Watch 87
Operation Manual
Sport Timer with alarm, chronograph, 1/100 sec, lap & split control
Features:
1. Hour, Minute, Second & Day oft he week.
2. Month & Date.
3. Chronograph with 1/100 second, with lap/split control.
4. 4 year Calendar.
5. Beep, Beep alarm with & snooze.
6. 12/24 hour display for user“s option.
7. Maximum counting: 23 hours, 59 minutes, 59 second.

Switch Control
Normal readout: Hour, Minute, Second &day oft he week.
1. Press and hold #1 to see Month/Date
2. Press and hold #2 to see Month/Date.
3. Press #3 to see Mode control for chronograph function
4. Then press #3 to set Alarm
5. Again press #3 to set Normal Time
6. Again press #3 to see Normal Time readout
Setting operation:
Normal Time:
1. Press #3 3 times to get normal time setting mode. The `second´ will start flasching.
Press #1 to set the seconds
2. Press #2 to see „Minute“flashing, press #1 to advance Minute.
3. Press #2 to see „Hour“flashing, press #1 to advance Hour
4. Press #2 to see Date flashing, press #1 to advance Date
5. Press #2 too see Month flashing, press #1 to advance Month.
6. Press #2 to see Day of week Flashing, press #1 to advance day of week
7. Finally, press #3 once to return to normal time readout
12/24Hour Option
While setting `hour´, 12/24 hour readout may be obtained by turn around cycle, i.e. AM/PM in 12 hour
format and `H` in 24 hour format.
Alarm Time:
1. Press #3 twice to get the alarm time „Hours“to Start flashing, press #1 to advance.
2. Press #2 once to get alarm time minute to start flashing, press #1 to advance.
3. Finally, press #3 once to return to normal time readout.
Chronograpf:
1. Press #3 to get into the Chronograph mode, by pressing #1, you can now start or stop on any
counting event.
2. During counting, press #2 will enter into lap time mode, meaning that 1 portion oft he
counting is registered on the display while the counting is still going on in the background.
3. Press #2 will get you tot he current counting.
Alarm Function:
1. The function oft he alarm can be armed or disarmed by pressuring and holding #2 the
pressing #1 together.
2. When alarm is on, it will display a bell on the upper right corner oft he display.
3. When the alarm bell is on, and the normal time approaches the alarm time, the alarm will
sound.
4. The alarm will stop itself after 60 seconds, or can be silenced by pressing # 2. In either case,
the alarm will sound again at the same time of next day.
Snooze Function:
1. When alarm beep,beep is on, pressing #1 will enter into a snooze function. It means that the
alarm will sound again after 5 minutes if not disabled by pressing #2.
Battery:
For battery replacement, use LR44 or equivalent.