Radacat GPS MESSENGER C2 User manual

GPS MESSENGER C2
Quick Start Guide
Install the APP
Find and install the RadacatCom APP in the Google Play or
Apple App store.
Activate your Radacat C2 device
• Press the power button for 3 seconds to power
on your C2.
• Enable Bluetooth on your phone.
• Follow the simple in-app steps to activate your C2.
• Your C2 is now ready to use!
Note: For more features, please refer to the user manual
inside the APP Help section or visit radacat.com
Create your account
Open the RadacatCom APP and register an account.
C2-Quicktart-20190617a.indd 1 2019-06-17 11:44

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ-
ing interference that may cause undesired operation.
RF Exposure Information
FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification
for use next to the head with the minimum separation distance of 0mm is 0.640W/Kg. This transmitter must not be
collocated or operating in conjunction with any other antenna or transmitter.
This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/
oetcf/eas/reports/GenericSearch.cfm search for FCC ID: 2AS98C2
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1)this device may not cause interference, and(2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables auxappareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage, et(2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre lefonctionnement.
This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been
tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This
equipment should be installed and operated with minimum distance 0 mm between the radiator and your body. This
device and its antenna(s)must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet appareil est conforme aux limites d’exposition DAS incontrôlée pour la population générale de la norme CNR-
102 d’Industrie Canada et a été testé en conformité avec les méthodes de mesure et procédures spécifiées dans
IEEE 1528 et IEC 62209. Cet appareil doit être installé et utilisé avec une distance minimale de 0 mm entre i’émetteur
et votre corps. Cet appareil et sa ou ses antennes ne doivent pas être co-localisés ou fonctionner en conjonction
avec tout autre antenne ou transmetteur.
C2-Quicktart-20190617a.indd 2 2019-06-17 11:44

Connect to your smart phone
1.Login at http://www.radacat.ca/, or scan
QR Code below to download free Radacat
App on your smart phone (available on
Android and IOS).
2.Turn on Bluetooth function on your
smart phone then press the “On/Off”
button on Radacat device. Open the
Radacat App with your smartphone and
tap “Click here to scan device”. Using the
scan function, align your phone camera
directly above the Radacat device to
initiate Bluetooth pairing.
3.Once the Bluetooth connection is
established, you will be able to
communicate with other users with text or
voice messaging, you will also be able to
share your whereabouts by using the
“location sharing” function.Tap open
“Manual” under “Me”on Radacat App to
learn more.
Get to know your device
Screen Instructions:
Device initating Not connected
to smartphone
Successful
connection
Sending/
Receiving message
Charging
Status
Device ID Code
Operating Your Device
On/Off
Button Function Action
Hold down Power off Hold the button for 3 seconds
Double press
Display device’s ID Code.
(Tap open “My Device”
under “Me” on App to
check device number. The
last 3 digits should match
with your device ID Code).
Press button twice quickly
Single press Power on Press button once

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received,
including interference that may cause undesired
operation.
Any changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
Battery Status
100% power 75% power 50% power
25% power critical power
Product Specifications
Caution
Location hazard:
To ensure safety of the user, do not use the device
near hospitals, pacemakers, on the plane, or any
other areas /times that restrict the use of
electronic devices.
Do not use near gas stations or any other
inflammable environments (areas that might
contain inflammable gas, gun powder, or other
flammable substances).
Do not use in areas/times that restrict wireless
electronic products.
Device Malfunctions (signs of smoke, smell, heat
etc) Immediate stop using the product if you
discover signs of smoke, unusual smell, heat or
other unusual state from the device. Turn off the
areas that might contain flammable substance to
avoid fire disasters.
Please contact Radacat customer service to
receive instructions.
Other cautions:
Do not dissemble or customize the device.
Do not emerge device in water, or burn the device.
Do not strike, throw or put pressure on the device.
Always use the designated charger to charge the
device, check the voltage and amperage on your
charger.
Do not leave device in direct sunlight or damp
environments for long periods of time.
Product
Specifications:
Screen: OLED Display
Bluetooth: Bluetooth 5.0
Battery: 1350mAh
Sensor: Temperature Sensor
Charging Port: Micro USB
Transmitted Power: less than 1 W
Battery Type: Lithium-ion
Weight: 55g
Dimension: 109*39*14mm
Operating
Temperature:
Operating Range:
Relative Parameter
-20 — 60℃
up to 6km in open area