Radenso Pro M-Edition User manual

Congratulaons on your new investment. You chose one of the best high-tech, GPS enabled, mobile
radar and laser detector available on the market today. The Radenso Pro M-Edion is the evoluon of
the Radenso equipped with an addional circuit designed to detect the newest Multaradar and Gatos
RT 3 delivering astonishing detecon range on all radar bands. Coupled with mulple filters against
annoying false alerts your Radenso Pro M-Edion will alert only when it counts.
Foreword
Extremely sensive high performance windshield mounted radar detector.
Longest detecon range on all bands.
Multaradar and Gatso RT 3 capable.
Selectable X, K, Ka narrow, MRCD, MRCT and Gatso radar bands tuned to the exact radar
frequencies used in North America for increased range and reduced false alarms.
Selectable Ka POP radar band (ON/OFF).
Selectable 2-level Traffic Sensor Rejecon Filter (TSR Low and TSR High).
Selectable 2-level filter for MRCD bands.
Selectable Ka band filter.
Highway, City and AutoCity Mode.
Revoluonary Auto City Mode with selectable band filtering based on speed sengs.
MUTE Mode mutes all K and X band alerts as long as it is acvated. Ka and Laser alerts are
not muted.
Bright, Dim and Dark Display modes.
Smart Dark Display Mode (turns on display only for alerts).
Bright Alphanumeric LED display.
AutoMute reduces volume of alerts aer 2 seconds.
Preloaded GPS Speed and Red Light Camera database.
Unlimited free lifeme updates for database and firmware - no obsolescence ever.
7 selectable display modes (Speed/Time, Speed/Voltage, Baery/Voltage, Time, Speed,
Speed/Compass).
Displays radar frequency during visual alert.
Voice Alerts with frequency announcement during alert.
Mark your own POI locaons for future alerts.
GPS lockout of false alert areas.
User-friendly, easy intuive voice-guided feature secon.
Large sucon cups for firm, secure installaon on windshield.
Power Cord with Power ON/OFF buon.
Oponal Direct Wire power cord available.
1 year manufacturer’s warranty.

1. Slide the windshield mounng bracket into the QuickMount slot at the front of the radar detector.
2. Plug the small end of the power cable into the power jack on the Radenso Pro-M on the le side and
connect the large plug with the 12V power socket in your car.
3. Press the red buon at the large end of the power cable (at the 12V socket) to turn the power cable
on. The buon will light up and indicate if Power is on.
4. Press the Power buon (le buon on top of unit) for 2 seconds to turn on Radenso PRO M. Unit will
power up with the start-up sequence. Aer a few seconds, the Radenso Pro-M will nofy you with a
voice message that the satellite is connected.
5. Adjust the volume level by pressing the volume buons “+2 or ”-” located on the right side of the
unit.
Radenso Pro-M is now ready to go. If you want to change any of the default sengs of your unit please
refer to the next pages.
To start using your Radenso Pro-M radar detector follow these easy steps:
The Radenso Pro-M is one of the most powerful radar detectors in the industry. It’s designed to protect
the driver from speeding ckets/fines. The Radenso Pro-M communicates with the driver in English and
it’s main funcons are the detecon of microwave radars (X / K / Ka narrow bands), laser guns, red light
cameras and fixed- speed cameras (GPS database).
When a radar signal is detected, the driver will be alerted by a visual text warning and a voice/tone
alert. The display and voice alert will indicate the detected radar band, frequency and signal strength. A
beeping warning tone will increase its intensity with increasing signal strenght. The signal strenght has
ten levels. GPS alerts are reported by voice; for example “Speed Camera”.
Noficaons:

Radar Horn Antennaand
Laser Lens
Needs unobstructed view of
the road ahead. Do not mount
behind metal coated wind-
shields or wipers.
Release Buon
Press this buon and slide the
windshield mount unl it is
locked. Press buon to unlock
the mount for removal.
Power/Menu Boon
Short press: You will enter into
setup menu. During an alert
pressing the buon mutes the
volume. The next alarm will be
reported again with the Default
volume.
Long press: Turn unit ON / OFF.
Volume Buons [+ -]
Short press: Changing volume of
the Radenso Pro-M or change
program opons in the Menu
Mode.
Power Jack
Plug power card into this port.
Mode/Sensivity/Mark Buon
Short press: Scroll between High-
way/City/AutoCity modes.
Long press: Add your own POI
GPS point for future alarms.
Display/Alert Lockout Buon
Short press: Select display bright-
ness (bright, dim, smart dark, full
dark).
Long press: Lockout alert loca-
on.
USB Port
Connect USB data cable to
update database and/or firm-
ware from our website.
Windshield Mount Slot
Insert the windshield mount into
this slot unl you hear the “click”.
Alphanumeric Display Raden-
so Pro-M will show selected
display mode, visual alerts and
text messages.

1. Place the nipple of the sucon cups
in the large hole of the bracket and
pull the sucon cup into the small
hole to secure them. Push the
rubber damper into the hole in the
middle of the bracket.
3. Insert the windshield mount into the
slot at the front of the detector unl
it is locked in posion.
4. Plug the small end of the power cable into the detector (located on the le side) and the large end
into your vehicle’s 12V ACC socket.
5. To remove Radenso Pro-M from the windshield press the release buon on top of the unit and slide
the unit off the mount.
2. Aach the windshield mount to the desired area of the windshield. Make sure it is in a level posion
parallel to the road ahead. To adjust the angle if necessary, gently push or pull on the bracket to bend
it. DO NOT use the detector to bend the bracket.
For firm and secure adhesion to the windshield, clean the windshield and sucon cups before usar
installing.
The Radenso Pro-M windshield mount allows a firm and secure installaon of the radar detector at
the windshield of your vehicle. Locate an area at the windshield that enables an unobtrusive installa-
on with clear view to the road ahead.
Rubber Damper

Le buon: MENU / ON-OFF.
Short press: You will enter into setup menu. During an alert pressing the buon will mute the volume.
The next alarm will be reported again in the standard volume.
Long press: Turn ON / OFF Radenso Pro-M.
Short press: You can scroll between Highway / City / Auto City modes. In City or Auto City modes the
sensivity of X / K / Ka bands can be reduced according to user preference.
Long Press: Add your own POI GPS point for future alarms.
Short press: Changing alert volume of Radenso Pro-M or change program opons while in Menu
Mode.
Short press: You can change the brightness of the display -> Bright -> Dim -> Smart Dark -> Full Dark.
Bright: Brightest display seng.
Dim: Slightly dimmed display.
Smart Dark: Display is deacvated but will come on with text warning during an alert.
Full Dark: Display is completely deacvated. Only voice and tone alerts are acve.
Long Press: Holding the buon for 2 seconds during an obvious false alert will lockout the locaon in
the future. The signal will then be reported and the alarm suppressed when passing the market locaon
again. You can reacvate the locaon again by holding the buon when approaching the marked loca-
on.
During start up: Pressing and holding the buon during startup will reset the Radenso Pro-M to factory
reset sengs and will display the uploaded Firmware version.

Press le buon to enter Menu Mode.
Press le buon again to go from one menu opon to the next.
Press VOLUME + or – buon (on the right side of detector) to change your seng within the category.
To save the changed selecon simply wait a few seconds without pressing any buon. The unit will
display “Seng Completed” to confirm your selecon. Alternavely, you can leave the menu and save
the seng by tapping the right buon.

The AutoCity driving mode allows the seng of minimum alert detecon speed for signal suppression
and signal filtering resulng in significantly reduced false alerts. Select AutoCity in Seng Mode.
Seng AutoCity speed: (feature selectable only if Seng Mode is set to AutoCity): Tapping the Middle
buon lets you select the speed for eding
To change the sensivity of signal recepon use + / - buon on the side of the unit. The level of signal
suppression can be selected in the range 0-9. The displayed numbers indicate the sensivity reducon
in the different radar bands. The example displayed above indicates that the X Band sensivity is
reduced by 50%, K Band sensivity reduced by 20% and Ka Band sensivity is not reduced at all (0%
reducon).
Le speed seng indicates the speed below which the radar recepon of the detector will be complete-
ly disabled (in example above 20 mph). No signals from police radar or false signals from automac door
openers will be reported.
The right speed seng indicates the speed below which the detector will detect alerts in City mode
with reduced radar sensivity (in example above 40 mph).
+ / - buons on the right side of the detector will change the specific speed seng.
RECOMMENDATION “20” and “35”: The detector will not alert to any signal below 20 mph and will
operate with reduced radar recepon between 20 and 35 mph. Maximum detector sensivity will be
achieved above 35 mph.
Seng City and AutoCity sensivity (this opon is available only in City or AutoCity Mode): By means of
the Middle buon you can select the radar band for eding.

The detector lets you mark known false alert areas so that you will not receive audio alerts in the future
at the marked locaon. The detector stores the GPS coordinates as well as radar band, radar frequency
and signal strength and compares it each me with the actual signal received. If the received signal at
the lockout locaon is different from the saved signal in terms of frequency and/or signal strength the
detector automacally unmutes and you will be alerted by audio again.
The display will show the band and signal strength and a small “L” icon in front of the radar band leer
indicates that the area is locked out. You can then either ignore the alert or delete the previously saved
locked out and re-save the new one.
To set a GPS lockout press the middle buon during an alert for 2 seconds. The detector will state “Lock-
out started” and will complete the process by stang “False alert area added”. To manually unlock the
detector press the middle buon for 2 seconds in a locked out area. You can also delete all lockouts in
the menu.

GPS: SiRF STAR IV
Ka narrow: 33.80, 34.7, 35 5 GHz
(± 120 MHz)
Ka Wide: 33.4 GHz - 36.0 GHz
K narrow: 24.1 GHz (± 70 MHz)
K wide: 24.1 GHz (± 150 MHz)
X band: 10.525 GHz (± 50 MHz)
Laser: 904mm
Operang Frequency: Operang Frequency:
Operang temperature: -30° - +180 ° F (-20° - +85° C)
Operang voltage: 11-16 V
Energy consumpon: 250 mA normal, 330 mA max. (12V)
Dimensions: 2.44 x 3.62 x 1.33 inch
62 x 92 x 34 mm
This device complies with part 15 of FCC rules: Operaon is subject to the following two condions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference that may cause undesired
FCC NOTE: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD
VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
FCC COMPLIANCE
operaon.
Radenso Pro-M is web ready and equipped with a Mini USB data port. It is recommended to check for
GPS Database updates every three months. To download updates of the GPS database or to update the
firmware follow the instrucons described in the “UPDATE” secon of the Radenso Homepage
hp://radenso.com
DATABASE & FIRMWARE UPDATES:
Your Dealer:

ONE (1) YEAR LIMITED WARRANTY
RADENSO warrants, for two years, to the original retail owner, this RADENSO product to be free from defects in
materials and crasmanship with only the limitaons or exclusions set out below.
WARRANTY DURATION: This warranty to the original user is valid for 12 months aer the date of original retail
sale.
SCOPE OF WARRANTY:
From the date of original consumer purchase and for the respecve periods specified above, RADENSO agrees to
repair or replace, at its sole expense, all RADENSO brand products purchased directly from RADENSO or from an
Authorized RADENSO Dealer, which are defecve in material and/or workmanship during ordinary consumer use.
Repairs may be completed using new or refurbished parts that meet or exceed RADENSO specificaons for new
parts. RADENSO, at its sole discreon, may replace a product, with a refurbished or recondioned unit having com-
parable features and a limited consumer warranty.
EXCLUSIONS:
IF YOU PURCHASE A RADENSO PRODUCT FROM AN UNAUTHORIZED DEALER, YOUR RADENSO WARRANTY WILL
NOT BE VALID.
This Warranty does not apply with respect to the following:
1. Defects or damage caused by accident, fire/smoke, flood/water damage, power surge (or related electrical
abnormalies), lightning or other acts of nature.
2. Defects or damage caused by abuse, misuse, negligence, accident, unauthorized product modificaon or
service, or failure to observe the instrucons contained in the manual furnished at the me of original
purchase.
3. Deterioraon/failure due to corrosive atmosphere, including but not limited to; smoke, high humidity or
extreme temperature.
4. Damage caused during shipment or handling.
5. Products purchased from anyone other than Radenso or an Independent Radenso Authorized Dealer. If you are
uncertain as to whether a dealer is authorized, please contact Radenso’s Customer Service.
6. Products that have had their serial numbers altered or removed.
7. Products purchased in “AS IS” condion or noted as “DEMO”, “DISPLAY”, “OPEN BOX”, or “CLEARANCE”.
8. Products that have been altered or repaired by anyone other than Radenso or a Radenso authorized service
staon in a manner that has affected their performance, stability or reliability.
9. Accessories aached to or to be used with Radenso products, such as antennas, mounts, cables, etc.
10. Any product aached to or used with the RADENSO product.
11. Packing materials and cosmec items.
12. Installaon and removal of Radenso products from the vehicle.
13. Maintenance, cleaning or periodic check-ups.
OBTAINING OF WARRANTY SERVICE
If, aer following the instrucons in this Operang Guide, you are certain that the product is defecve, pack the
product carefully (preferably in its original packaging) and include evidence of original purchase and a note describ-
ing the defect. The product should be shipped freight prepaid, by traceable means, or delivered, to warrantor at:
RADENSO, 1100 Sycamore St. 1st floor, Cincinna OH 45202
1-888-RADENSO (1-888-723-3676) 9 a.m. to 5.00 p.m., Eastern Time, Monday through Friday