Whistler CR80 User manual

Laser Wavelength:
905 ± 50 nanometers (nm)
Radar Frequencies:
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
Operating Temperature Range:-10 C to +70 C
(14 F to +158 F)
Power Requirements:
Operational 12 to 15 volts DC, 250mA nominal
Vehicle Battery Saver, 30mA nominal.
One or more U.S. patents may apply:
#7,215,276
POP™Mode is a trademark of MPH Industries, Inc.
SWS™is a trademark of Safety Warning System L.C.
Specifications are subject to change without
notice
POP™ MODE ALERTSOPERATION
Alert Priority
When two or more signals are received at the same
time, the alert priority is:
1. Laser
2. Speed Radar
3. Safety Warning System
Example: If X band is alerting, then suddenly a
VG-2 signal is detected, the VG-2 warning will
override the X band alert.
RESET FEATURES
Reset Features
All user features can be reset to factory settings.
 •UnplugPowerCordfromunit.
 •PressandholdPowerandQuietbuttons.
 •PlugPowerCordintounit.
 •Waitfor2beeps.
 •ReleasePowerandQuietbuttons.
Unit is now reset to the following features
and settings.
Default factory settings are:
1. Audio to level (5)
2. Displays “H”
3.AutoQuietModeOFF
4. SWS
™
OFF
5. Dim/Dark Mode to full illumination
6. All Radar Bands ON
7. LED Periscope to Blink
8. POP
™
OFF
9. X/K Filter 1
10. Ka Filter 1
11. Laser ON
12. Voice
®
ON
13. TFSR OFF
LASER/RADAR ALERTS
Your Whistler detector is expertly engineered
and designed to exacting quality standards to
provide you with reliable, trouble-free operation.
If your unit has been correctly installed following
the guidelines in this manual, but is not
operating optimally, please refer to the
troubleshooting guide below.
PROBLEM: No display or audio.
•Check fuse in Whistler plug; replace if
necessary with a 2 amp, 3AG type.
•Check fuse for lighter socket; replace if
necessary.
•Make sure lighter socket is clean.
PROBLEM: Unit alarms when vehicle hits
bumps.
•Check for loose lighter socket; tighten and
clean.
•Check connections at both ends of power
cord. Substitute another cord to determine if
cord is defective. Return defective cord to
the factory.
PROBLEM: Audio alerts are not loud enough.
• CancelAutoQuietModeorCityMode.
•Check audio level setting (see page 8 ).
If difficulties occur which cannot be solved by
information in this Troubleshooting Guide,
please call Whistler Customer Service at
1-800-531-0004orvisitourFAQpageatwww.
whistlergroup.com before returning your unit
for service.
TROUBLESHOOTING
Care And Maintenance
During the summer months, avoid prolonged
exposure to direct sunlight by removing your
unit from the dash when your vehicle is parked
for an extended period of time. Do not spray
water, cleaners, or polishes directly onto the unit.
The spray may penetrate through the openings
and damage the unit. Also, do not use any
abrasive cleaners on the unit’s exterior.
ARE DETECTORS LEGAL?
In Most States YES!
Laser-Radar detectors are legal in every state for
automobiles and light trucks (under 10,000 lbs.)
except Virginia and Washington, D.C., which
have local regulations restricting the use of
radar receivers in any vehicle.
The Federal Highway Administration (FHWA)
passed a nationwide regulation, effective
January 1994, which prohibited radar and laser
detector use in vehicles over 10,000 lbs.
CARE AND MAINTENANCE
Radar Facts
A radar gun operates by transmitting radio
waves at certain frequencies which reflect off
objects and are picked up by the radar gun’s
receiving section. When a radar beam reflects
off a moving target, a measurable frequency
shift occurs. The radar unit converts this shift into
miles per hour to determine your vehicle’s speed.
Currently, the FCC (Federal Communications
Commission) permits operation of traffic radar
guns at X Band (10.500 - 10.550 GHz), K Band
(24.050 - 24.250 GHz), and Ka Band (33.400 -
36.000 GHz).
Note: A radar detector will not alarm if an
officer is not transmitting on any one of the
above radar bands.
POP™ Mode
POP™Mode is a feature on some radar guns
operating on K and Ka bands. When the
gun is in POP™Mode and activated, a brief
burst of energy, less that 1/15 of a second, is
transmitted and the vehicle’s speed is quickly
acquired. A detector without POP™Mode
detection capability cannot respond to this brief
transmission.
FCC INFORMATION
Laser Facts
It’s well documented that many radar guns
cannot reliably provide the speed of a targeted
vehicle that is traveling in a group of vehicles. In
contrast, a laser gun can target a specific vehicle
out of a line of traffic and determine its speed.
The advantage of laser over radar in terms of
target identification is the result of the laser
gun’s narrow beam. A radar gun’s transmission
can cover more than a four-lane highway at a
distance of 1,000 feet, compared with a laser
gun’s transmission which covers about 3 feet at
the same distance. For best protection, keep
these points in mind:
•Becausethevehicle’slicenseplateor
headlights are the laser gun’s primary targets,
mounting the Whistler detector on the
dashboard can improve laser detection at
short range.
•Donotfollowcloselybehindanyvehicle.Ifyou
can’t see past a vehicle ahead of you, chances
are your detector won’t either.
•Thereceivingrangeoflasersignalswill
not be the same as radar signals. Laser
guns are most often used at short range.
Whistler Laser-Radar detectors receive all current
laser guns which operate at a laser wavelength of 905
+/- 50mm including but not limited to the following:
SPEED MONITORINGSPEED MONITORING
Laser Tips
If you are the targeted vehicle, a laser gun can
often determine your speed within a few
seconds after you receive an alert. In this
situation, there is generally no time to safely
adjust your speed. However, if you are traveling
near or behind the targeted vehicle and receive
an alert, response time should be sufficient.
Any laser alert, regardless of duration, requires
immediate action!
Other Speed Detection Systems
Several techniques other than radar or laser
are used to measure vehicle speeds. When
these methods are being used, no detector can
provide a warning. These techniques include:
•Pacing - A patrol car drives behind you and
matches your driving speed.
•Vascar/Aircraft - The time it takes a vehicle to
travel a known distance is measured.
WARRANTY INFORMATION
Consumer Warranty
This Whistler Laser-Radar detector is warranted
to the original purchaser for a period of one year
from the date of original purchase against all
defects in materials and workmanship. This
limited warranty is void if the unit is abused,
modified, installed improperly, or if the housing and/
or serial numbers have been removed.There are
no express warranties covering this product other
than those set forth in this warranty. All express or
implied warranties for this product are limited to the
above time. Whistler is not liable for damages
arising from the use, misuse, or operation of this
product.
Note:Unitsthatcannotberepairedwillbereplacedwiththe
same or similar model. Replacement unit’s warranty will be
based on the original unit’s purchase date.
SPEED MONITORING
Service Under Warranty
During the warranty period, defective units will
be repaired without charge to the purchaser when
returned with a dated store receipt to the address
below.Unitsreturnedwithoutadatedstore
receipt will be handled as described in section
“Service Out Of Warranty.”
Due to the specialized equipment necessary for
testing a Laser-Radar receiver, there are no
authorized service stations for Whistler brand
detectors other than Whistler.
When returning a unit for service, please
follow these instructions:
1. Ship the unit in the original carton or in a
suitable sturdy equivalent, fully insured, with
return receipt requested to:
Whistler Repair Dept.
551 N. 13th St.
Rogers, AR. 72756
Please allow 3 weeks turn around time.
Important: Whistler will not assume
responsibility for loss or damage incurred in
shipping. Therefore, please ship your unit
insured with return receipt requested. CODs
will not be accepted!
WARRANTY INFORMATION
2. Include with your unit the following
information, clearly printed:
 • Yournameandstreetaddress(for
  shippingviaUPS),adaytimetelephone 
number and an email address, if applicable.
 • Adetaileddescriptionoftheproblem(e.g.,
  “Unitperformsself-testbutdoesnotrespond
` to radar”).
 • Acopyofyourdatedstorereceiptorbillof
sale.
3. Be certain your unit is returned with its serial
number. For reference, please write your unit’s
serial number in the space provided on page
27 of this manual.
Unitswithoutserialnumbersarenotcoveredunderwarranty.
Important: To validate that your unit is within
the warranty period, make sure you keep a copy
of your dated store receipt. You may register
your warranty online at www.whistlergroup.com,
however, for warranty verification purposes,
a copy of your dated store receipt must
accompany any unit sent in for warranty work.
Service Out of Warranty
Unitswillberepairedat‘outofwarranty’service
rates when:
 •Theunit’soriginalwarrantyhasexpired.
 •Adatedstorereceiptisnotsupplied.
 • Theunithasbeenreturnedwithoutitsserial
number.
 •Theunithasbeenabused,modified, 
installed improperly, or had its housing
removed.
WARRANTY INFORMATION
The minimum out of warranty service fee for
yourWhistlerdetectoris$65.00(U.S.).Ifyou
require out of warranty service, please return
your unit as outlined in the section “Service
UnderWarranty”alongwithacertifiedcheck
or money order for $65.00. Payment may also
be made by MasterCard, VISA or American
Express; personal checks are not accepted.
In the event repairs cannot be covered by the
minimum service fee, you will be contacted by
a Whistler technical service specialist who will
outline options available to you.
If you elect not to have your unit repaired, it
will be returned to you along with your certified
check or money order.
Important: When returning your unit for service,
be certain to include a daytime telephone
number and an email address (if applicable).
Customer Service
If you have questions concerning the operation of
your Whistler detector, or require service during or
after the warranty period, please call Customer Service
at:
1-800-531-0004
Representatives are available to answer your questions
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or
visittheFAQ’satwww.whistlergroup.com.
WARRANTY INFORMATION
SPECI FIC ATIONS OWNER’S MANUAL
The Whistler Group Corporate Headquarters
3604 NW Frontage Rd. • Bentonville, AR 72712
Tel [phone] • Fax [phone]
Customer Return Center
551 N 13th St. • Rogers, AR 72756
Customer Service Tel [phone]
www.whistlergroup.com
P/N 260042 © 2013 The Whistler Group, Inc.
CR80
HIGH Performance
LASER-RADAR
DETECTOR
FCC ID : HSXWH20
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Important: FCC requirements state that
changes or modifications not expressly
approved by Whistler could void the user’s
authority to operate the equipment.
LTI 20-20
LTI TruSpeed
®
S
UltraLyte
Laser Ally
Pro Laser
™
I II III
Laser Atlanta
®
Stealth Mode
These and other accessories can be
ordered directly from Whistler by calling
1-800-531-0004 or visiting our online store
at www.whistlergroup.com
Order # Description Price
202152 Windshield Bracket Kit $9.95
202138 Visor Bracket $6.95
206552 Power Cord (5’) $14.95
206880 Hardwire Kit (10’ ) $9.95
(for wiring to fuse box)
206666 Modular* Cord Package $17.95
(includes coiled and straight
cords, and power adapter)
202156 Package of 4 Suction Cups $2.95
402080 Non Skid Dash Pad $6.95
403774 INTELLICORD®$27.95
* Modular: Interconnecting pieces cord and
plug. Shipping and handling (per order) $5.00.
Prices are subject to change without notice.
ACCESSORIES
POP™ Mode Alerts
Because POP™Mode radar utilizes the same
K or Ka band frequencies, POP™Mode Alerts
will be displayed as regular radar alerts.
LASER/RADAR ALERTS
Speed Radar Audio/Visual Alerts
When X, K or Ka is detected, the band ID and
signal strength are displayed. The audio alert is
continuous and has a geiger counter-like
pattern. The faster the beep, the closer or
stronger the radar source.
Laser Audio/Visual Alerts
When a laser signal is detected the audio alert is
continuous for a minimum of 3 seconds.
 •Theunitdisplaysan“L”.
Pulse Protection®
Pulse (or instant-on) radar is more difficult
to detect than conventional radar because
itremains‘off’untilactivatedtomeasurethe
speed of a targeted vehicle.
When a pulse type transmission is detected, your
Whistler detector sounds an urgent 3-second
audio warning and the unit displays a “P”.
After the 3-second pulse alert, the standard alert
pattern continues for as long as the signal is
present.
It is important to respond promptly to a pulse
Stay Alert Feature
The Stay Alert Feature is designed to test a
driver’s alertness. To engage (when unit is not
alarming) :
• Press and hold City for approximately
2 seconds. Release button during or
immediately after the alert is given.
The “H” or “C” will flash indicating Stay Alert is
activated. Within 30-60 seconds two beeps are
sounded; to show alertness, the driver must
presseithertheMenu,City,orQuietbutton
within 3-5 seconds.
If the button is pressed within 3-5 seconds, the
cycle is repeated. If a button is not pressed with
in 3-5 seconds, the alarm sounds and the entire
display will flash.
• Press Power to exit
WARNING!!! Stay Alert is NOT intended as a
substitute for adequate rest. You should NOT
operate a vehicle if you are drowsy. During
extended periods of vehicle operation, you should
take frequent breaks. Improper reliance on the
Stay Alert feature may result in vehicle damage,
personal injury or death.
SWS™
Safety Warning System™
When SWS™ is detected an unique audio alert
is sounded and an is displayed to indicate an
SWS™ message has been received.
Note: Not all areas have Safety Warning System™
transmitters
NEVER OPERATE A
VEHICLE IF YOU
ARE DROWSY!
______________________________________________
write serial number in the space provided
27
26
25
242322
21
20
19
18
17
1615

X/K and Ka Filter Modes
There are times when a radar detector in
another vehicle, can emit a frequency which can
cause your detector to falsely alert. These Filter
Modes allow you to select the level needed for
your area to minimize the occurrences of these
false alerts.
X/K and Ka Filter Mode factory default settings
should provide adequate filtering for most
conditions. If you experience excessive alerts
due to radar detectors in other vehicles,
increase the Filter level for the band received.
See Option Selection Mode to change the filter
settings.
Traffic Flow Signal Rejection (TFSR)
Recently, many new products operate on X
or K band causing nuisance alerts to radar
detectors. Some of these are radar based Traffic
Monitoring Systems mounted to poles alongside
the highway and others are K Band Lane
Change Assistants and Blind Spot Detectors
found on some automobiles. When turned
on in option mode, helps eliminate excessive
alerts from erroneous X and K-band sources.
Traffic flow monitoring systems are getting more
common. Many of these systems generate radar
signals to measure the flow of traffic across
multiple lanes. Most detectors will alert you to
it unnecessarily. This rejection feature examines
the incoming signal and will aid in reducing the
alerts to such sources.
We suggest you turn TFSR on if you are experiencing excessive
X or K band false alerts every half mile or so along stretches of
roadway that contain these traffic flow sensors.
Model Features Summary........................3-5
Installation................................................5-7
•Mounting Guidelines 5
•Windshield Mounting 5-6
•Power Connection 6-7
•Fuse Replacement Kit 7
Operation...............................................8-15
•Power On and Self-Test 8
•INTELLICORD®Ready 8
•Setting Saver 8
•Feature Engaged Confirmation 8
•Audio Level Adjustment 8
•Self Test Mute 9
•Quiet Mode 9
•Auto Quiet Mode 9
•Alert Periscopes 10
•City/City 1/ City 2 Mode 10
•Highway Mode 11
•Teach/Tutorial Mode 11
•Dim/Dark Mode 11
•Vehicle Battery Saver Mode 12
•Integrated Real Voice®12
•X/K Ka Filter Mode 13
•Traffic Flow Signal Rejection (TFSR) 13
•Option Select Mode 14
•Stay Alert Feature 15
.Safety Warning System™ 15
POP™Mode Alerts ....................................16
Laser/Radar Alerts ...............................16-17
•Speed Radar Audio/Visual Alerts 16
•Laser Audio/Visual Alerts 16
•Pulse Protection® 16
•Alert Priority 17
Reset Features ..........................................17
Troubleshooting Guide .............................18
Care and Maintenance ..............................19
Are Detectors Legal? ................................19
FCC Information .......................................20
Speed Monitoring .................................20-22
•Radar Facts 20
•POP™ Mode 20
•Total Band Protection™ 21
•Laser Facts 21
•Other Speed Detection Systems 22
Warranty Information ...........................22-26
Specifications ............................................26
Accessories ...............................................27
1. Bracket Release Button – Provides quick
and easy release of the mounting bracket.
2. Speaker – Provides distinct audio warnings
for X, K, Ka band radar, safety warning system
and laser.
3. Mounting Bracket Location – Slot holds
mounting bracket firmly.
4. Radar Antenna – Compact, high-efficiency
antenna receives radar signals.
5. Front Laser Antenna – High gain optical lens
provides increased sensitivity and field of view for
leading-edge laser detection.
6. Rear Laser Antenna – An integrated optical
wave-guide provides superior detection of
laser signals transmitted from behind.
7. City Button - Reduces the annoyance of
false alerts typically encountered in urban
driving areas.
8. Quiet Button - PressingQUIETbeforea
signalisdetectedengagesAutoQuietMode
which automatically reduces the audio level after
the initial warning to a low audio level setting.
PressingQUIETduringaradar/laserencounter
silences audio alerts, while allowing visual
alerts to keep you informed.
9. Power/Volume - Turns unit on/off and
adjusts audio level.
10. Dim/Dark Button - Engages Dim/Dark
mode display options.
11. Menu Button - Enters option select mode.
12. Numeric Icon Display - combines icon
display with a 7 segment digital display that
shows signal strength indication and band
identification.
13. Alert Periscopes - Provides an
additional attention getting visual alert.
14. X-band Icon - indicates the unit is receiving
a X-band signal.
FEATURE DESCRIPTIONS
15. K-band Icon - indicates the unit is receiving a
K-band signal.
16. Ka-band Icon - indicates the unit is receiving
a Ka-band signal.
17. V - indicates that the unit is receiving a VG-2
signal. Indicates that VG-2 is engaged.
18. H - indicates unit is in Highway mode.
19. C - indicates that the unit is operating in city mode.
20. Signal Strength Icon - indicates the strength
of the signal being detected.
21. L - indicates that the unit is receiving a laser signal.
22. Power Jack - provides connection for the power cord
INSTALLATION
Mounting Guidelines
•Mount the unit as low as possible near the
center of the windshield.
•Do not mount your unit behind wipers,
ornaments, mirrored sunscreens, etc. These
obstructions have metal surfaces which can
affect radar and laser signals and reduce
critical warning time. (Regular tinted glass
does not affect reception.)
•Some windshields have an Instaclear™or
Electriclear™type coating, which affects radar
signals. Consult your dealer or the vehicle’s
owner’s manual to determine if your windshield
has this coating.
•Avoid placing unit in direct contact with wind
shield.
•To reduce the possibility of theft, conceal your
unit when not in use.
Windshield Mounting
•Install the two suction cups and rubber bumper
onto the bracket by fitting them into their holes.
•Press the suction cups onto the windshield at the
location you have chosen. (Image A)
FEATURE DESCRIPTIONS
Important: Some newer cars have a plastic
safety coating on the inside of the windshield.
The windshield bracket may leave permanent
marks on this type of surface. To find out if your
vehicle has this type of windshield, check the
vehicle’s owner’s manual or ask your dealer.
We recommend that you do not leave the
suction cup bracket on the windshield in direct
sunlight. If the detector is removed, this may
cause blistering of the dash in some vehicles.
• Slide the detector onto the bracket until it
locks into place. (Image B)
• If necessary, the unit may be leveled by
bending the windshield bracket. Press the
bracket release button and remove the
detector before bending.
Power Cord Connection
• Plug the small end of the power cord into the
unit’s power jack.
• Plug the large end into the vehicle’s cigarette
lighter.
Note: Cord fits tightly into detector. When
installing the cord, expect some resistance.
INSTALLATION INSTALLATION
Power On Self Test & Volume
To turn the unit ON or OFF, gently press the center
of the Power/Volume button into the side of the
unit. Each time your Whistler detector is turned on,
an automatic self-test sequence confirms that the
speaker and visual displays are functional.
INTELLICORD®Ready
The optional INTELLICORD®power cable allows
theusertoremotelycontrolPowerandQuiet/Auto
Quietfunctionswiththepressofabuttonlocated
on the power cable’s plug.
Setting Saver
Setting Saver stores your personalized settings so
that when the detector is turned off and then on
again, you do not have to re-enter them.
Feature Engaged Confirmation
Each time a button is pressed one beep confirms
feature “on”, two beeps confirm feature “off”
Audio Level Adjustment
The audio levels can be adjusted high to low or
low to high.
• Rotate Power/Volume button back to increase
audio level.
• Rotate Power/Volume button forward to
decrease audio level.
As audio level is adjusted, beeps are provided
and the display indicates volume level.
OPERATION OPERATION
Alert Periscopes
Whistler’s Alert Periscopes provide an added
attention getting visual alert. The two extra LED’s
flash on and off when the unit alarms to provide a
unique visual alert. This alert can be programmed
through the Option Select Mode to be: ON, OFF,
or FLASHING during alerts.
City/City 1/City 2 Modes
Whistler’s Three Stage City Mode is designed
to reduce the annoyance of automatic door
openers, intrusion alarms and other devices
which share frequencies with police radar.
Generally, X band is used for these devices.
•PressCitytocancelHighwayModeand 
engage City Mode.
•PressCitybuttonagaintoenterCity1Mode
•PressCitybuttonagaintoenterCity2Mode
•PressCityafourthtimetocancelCity2Mode
and return the unit to Highway Mode.
In City Mode, weak speed/safety warning
system signals give an initial alarm of two
beeps, and then remains quiet unless the signal
becomes very strong. When the signal strength
increases, two additional beeps are provided.
City 1 and City 2 Modes operate the same as
Highway Mode, but in City 1 Mode, X band
requires a stronger signal to alert. In City 2
Mode, X-band is not detected.
Caution: Some towns/small cities may still be
using X band radar. City Modes do not change
the audio alert for laser.
OPERATION
Highway Mode
Highway mode provides full audio warnings any
time radar (X, K, Ka, Safety Warning System) or
laser signals are detected, and is recommended
for open road driving.
For more information on City and Highway
mode,pleasevisitourFAQpageonour
website: www.whistlergroup.com
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
 •PressCityandQuietbuttonssimultaneously
and release.
 •PressPowertoexit.
Dim/Dark Modes
Dim/Dark Mode reduces the illumination of the
display
•PressandreleasetheDarkbuttontoreduce
illumination to a dim setting.
•PressandreleasetheDarkbuttonasecond
time to engage Dark Mode. The display
illumination is further reduced.
Dim or Dark can be engaged during an alert. In
Dark Mode, the display goes dark for as long as
a signal is being detected and 20 seconds after,
then the display returns to the dimmer setting.
•PressandreleasetheDarkbuttonathirdtime
to restore the display to full illumination.
OPERATION
Vehicle Battery Saver Mode
The Vehicle Battery Saver Mode automatically
shuts off your detector within 6 hours. The timer
is reset if the detector is turned off, unplugged
or any button is pressed before the timer has
expired. The detector will alert you with an
audible and visual warning before it shuts off.
During this warning you can reset the timer by
pressing any button.
If the unit has automatically turned itself off,
press the Power button to turn the unit back on.
You can manually engage the Vehicle Battery
Saver Mode by pressing and holding the City
button until one beep is heard.
Integrated Real Voice®
When selected, Real Voice®will be used to
articulate the following:
1. Band Identification
2. Safety Warning System messages
3. Feature Selection
Note: In certain cases, the voice message does
not replicate the text message.
Voice OFF/ON is selected by holding quiet
button for approximately 2 seconds. Voice ON
will announce “caution”, Voice OFF will give a
double beep.
OPERATION OPERATION
Option Select Mode
Press the Menu button to enter Option Select Mode.
Each press of the Menu button changes to the next
selectable feature.
TheDark(D)buttonandtheQuiet(Q)buttonturns
the feature ON/OFF or Blinking. The decimal point
illumination indicates whether a feature is on or off. A
button must be pressed within 20 seconds or Option
Select Mode will automatically be exited.
Self Test Mute
PresstheQuietbuttonduringtheSelf-Test
sequence to cancel the Self-Test audio. This will
not affect radar/laser alerts. To restore the Self-
Testaudio,presstheQuietbuttonduringthenext
Self-Test.
Quiet Mode
Quietcancelsaudioduringanalertandanynew
alert within 20 seconds. After 20 seconds of no
alerts, the audio is restored for any new alerts.
• PressQuiettocanceltheaudio.
• PressQuietasecondtimeduringanalertto
restore the standard audio alert pattern; or
turn the unit off, then on.
Auto Quiet Mode
AutoQuietreducestheselectedaudiolevelto
level (1) approximately 5 seconds after a radar
or safety warning system signal is detected. The
alert for any new signal within 20 seconds will
resumeatlevel(1).AutoQuietdoesnotaffect
laser alerts.
• PressQuietbutton(beforeasignalis
detected)toengageAutoQuiet.
• OncetheAutoQuietmodeisengaged,you
may cancel the audio alarm by pressing
Quiet.
• PressQuiet(whentheunitisnotalarming)to
cancelAutoQuietmode.
OPERATION
WHISTLER FEATURES
Rubber Bumper
Windshield
Mounting
Fuse Replacement
The lighter socket plug is equipped with a
replaceable 2 amp, 3AG fuse located behind
the silver tip. To replace the fuse, carefully
unscrew the tip of the plug.
Important:Unscrewslowly.Thetipcontainsa
spring which may fly out when disassembling.
Insert the new fuse with the spring and screw
on the tip. With use, screw cap on plug may
loosen. Retighten occasionally.
Installing the Hardwire Kit
The“U”typeconnectormustbesecuredtoa
metal surface that is electrically connected to
the battery ground (negative) terminal.
The spade type connector can connect to either
live 12 volts or switched 12 volts at your fuse
panel accessory port.
If no port is available, cut off the spade
terminal, expose 1/4 to 1/2 inch of wire, and
splice into a source of 12 volt power.
Fuse Replacement - Hardwire Kit
The inline fuse holder on the power cable is
equipped with a replaceable 2 amp, 3AG fuse
located inside the fuse holder.
To replace the fuse, carefully twist the holder to
open it to gain access to the fuse.
Feature Display To Change Option
Laser
(default = ON) L. D for ON
Q for OFF L. = ON L = OFF
Alert Periscopes
(default=Blinking
with alert)
.D or Q
to select ON, OFF BLINKING
X Band
(default = ON) X. D for ON
Q for OFF X. = ON X = OFF
K Band
(default = ON) K. D for ON
Q for OFF K. = ON K = OFF
Ka Band
(default = ON) Ka. D for ON
Q for OFF Ka. = ON Ka = OFF
POP Mode
(default = OFF) PD for ON
Q for OFF P. = ON P = OFF
SWS
(default = OFF) SD for ON
Q for OFF S. = ON S = OFF
TFSR
(default = OFF) tD for ON
Q for OFF t. = ON t = OFF
X/K
Filter X K F 1 D or Q to select
F1 = Filter (Default)
F2 = Filter 2
F3 = Filter 3
Ka
Filter Ka F 1 D or Q to select
F1 = Filter (Default)
F2 = Filter 2
F3 = Filter 3
Dear Whistler Customer,
If you have questions concerning the operation of
this Whistler product please call:
Customer Service
1-800-531-0004
Monday-Friday•8:00am-5:00pmCT
or visit our website
www.whistlergroup.com
Please keep the receipt in a safe place. You
may register your product online at
www.whistlergroup.com. For warranty verification
purposes, a copy of your dated store receipt must
still accompany any unit sent in for warranty work. If
the unit is returned without a dated store receipt, an
out of warranty service charge applies. Note: Your
warranty period begins at the time of purchase.
The warranty is validated only by the dated store
receipt! Please record the serial number of the
unit in the space provided in the warranty section
of the manual.
To fully acquaint yourself with the operation of
your Whistler detector and to better understand
the differences between detecting radar, laser,
and safety radar signals, we recommend reading
thisentiremanualorvisitingourF.A.Q.pageon
our website www.whistlergroup.com
Enjoy your Whistler detector and please drive
safely.
Sincerely,
The Whistler Group, Inc.
NOTE: Press the Power button to exit Option Select
Mode.
45
3
•HighPerformance
•3FilterModes
•SelectableTones
•TotalBandProtection™
•NumericIconDisplay
•DetectsPOP™ Mode
•360°MaxxCoverage
•RealVoice®
•3CityModes/HigwayMode
•LowEmission
•Quiet/AutoQuietMode
•Dim/DarkMode
•StayAlert™
•SettingSaver
•VehicleBatterySaver™
•Safety Warning System™
•AlertPriority
•AlertPeriscopes
•TrafficFlowSignalRejection
•HighGainLens
Features
2
9
6
1
8
10 11
7
13
12
22
17
21
14
15
18,19,
20
16
43
141312
11
10
9
8
765