Radiforce LS560W User manual

FST5600
Instruction Manual, 02/2014, A5E10001261
Stand Mounting Instructions for the RadiForce®
LS560W, LS580W, LS580W JP and LX600W
The FST5600 stand is designed for the RadiForce® 8MP large screen monitor series.
Please ensure that all monitor weight and stability requirements are met before using the
stand with other models (VESA mount 400mm x 400mm).
Order No.: 6GF69888BA01
Description: FST5600
A. Installing the FST5600 stand on LS560W and LS580W monitors
Step 1
Insert the 4 M8x20 screws approx.
5 mm deep into the designated holes at
the rear of the display.

FST5600
Instruction Manual, 02/2014, A5E10001261
Step 3
Tighten the 4 screws with an Allen wrench (18 Nm).
Step 4
Place the monitor in its final location.
Caution
The device must be removed from its packaging and carried by at least 2 persons.
Wear appropriate protection gear to prevent injuries should the device be dropped.
Step 2
Hook the 2 stand elements into the 4
screw heads. Position the elements as
shown, using the lower keyholes
(see arrows).
!

FST5600
Instruction Manual, 02/2014, A5E10001261
B. Installing the FST5600 stand on LX600W monitors
Step 1
Insert the 4 M8x20 screws approx.
5 mm deep into the designated holes at
the rear of the display.

FST5600
Instruction Manual, 02/2014, A5E10001261
Step 3
Tighten the 4 screws with an Allen wrench (18 Nm)
Step 4
Place the monitor in its final location
Caution
The device must be removed from its packaging and carried by at least 2 persons.
Wear appropriate protection gear to prevent injuries should the device be dropped.
Step 2
Hook the 2 stand elements into
the 4 screw heads. Position the
elements as shown, using the
upper keyholes (see arrows)
!