Ram Trucks RAM 1500 2022 User manual

QUICKQUICK
STARTSTART
GUIDEGUIDE
RAM 1500RAM 1500

Cruise Control
Buttons
Instrument Cluster
Control Buttons
4WD ControlsHood ReleaseElectric Park Brake
Electronic
Range Selector
Side Mirror
Controls
Integrated Trailer
Brake Module
Light
Controls
Pedal
Adjust
Garage Door
Opener
Compartment Release
AUX/USB Ports (C/A)
Digital Rearview Mirror
Lights And Sunroof
Controls
VEHICLE OVERVIEW

Push and hold the two outside HomeLink® buttons for 20 seconds until the
orange indicator flashes. An individual channel cannot be erased.
TO ERASE ALL SET CHANNELS:
Garage Door Opener
While the car is ON, hold the handheld garage door transmitter 1-3 inches
from the HomeLink®button you want to program in the vehicle.
11
Push and hold both the HomeLink® button being programmed and the
button on the garage door transmitter.
22
NEED ASSISTANCE?
1-800-355-3515
55If the programming was successful, your garage
door should open and close with your chosen
HomeLink®button.
44 For Rolling Code garage door openers only, firmly push and release
the “LEARN” or “TRAIN” button on your garage door opener motor
in your garage, then push the HomeLink®button in your vehicle
three times (holding the button for two seconds each time).
For Non-Rolling Code garage door openers, watch for the indicator
light to go constant.
For Rolling Code garage door openers, watch for the indicator light
to go from a slow blink to blinking rapidly.
33
Scan For
HomeLink®
Video
LINK YOUR GARAGE DOOR
ROLLING OR NON-ROLLING?
Check your garage door opener motor in your garage for
a “LEARN” or “TRAIN” button by the hanging antenna.
If you have one of these, you have a Rolling Code garage
door opener.
??

Pair a Phone
Troubleshooting
11
Perform a reset by holding the power
button on the radio for 15 seconds
22Reboot your phone 44Follow the Pair a Phone steps
above to set up phone
33Remove the paired phone
22
With the vehicle in the ACC or ON/RUN
position, press the Phone button on
the vehicle’s touchscreen menu bar
11Make sure Bluetooth®is enabled on your
mobile device
33Press “Device Manager”
44 Select “Add Device”
55 Follow the prompts on your phone and on
the touchscreen
CONNECT YOUR APPS
KEEP IN MIND:
Connect your smartphone to the media USB port or pair your smartphone within
“Device Manager”.
The Android AutoTM or Apple CarPlay®icon will replace the phone icon on the touchscreen.
For AndroidTM Users, if the Android AutoTM app was not previously
downloaded, it will download the first time you plug in your device.
For Apple®Users, Apple CarPlay®is only compatible with iPhone®5
or later and requires Siri being enabled in “Settings”.
CONNECT YOUR PHONE
Ready to remove a phone or audio device?
11
Press the Device Manager button on the touchscreen.
33
Press
“
Delete Device
”
. The device
should be removed.
22
Press the Settings gear icon next to the
phone or device you wish to remove.
44
On your phone's Bluetooth®or Set Up menu,
remove the saved Uconnect radio.

Connected Services
WITH CONNECTED
SERVICES YOU CAN...
Lock Your Vehicle
Unlock Your Vehicle
Remote Start Your Vehicle
Cancel Remote Start
Activate Your Horn
ACTIVATE YOUR
REMOTE SERVICES
Press “Apps” on the touchscreen.
11
22Press “Activate Services”.
Press “Activate Now”.
33
44There are two ways to activate:
via email or via an agent. On the
next screen, you can either enter
your name and email, or press
“Call An Agent” to directly speak
with an agent.
SET UP SERVICES & OWNER'S PROFILE
**Requires an active Uconnect Connected Services subscription
Mopar®YOUR Way
CREATE YOUR OWNER'S PROFILE TODAY!
Get 24/7 Access To Everything You Need
Custom vehicle dashboard
Schedule dealer service with ease
View maintenance records**
Mobile vehicle commands**
Access to your vehicle's Owner's Information
Obtain special offers on Mopar®service
GET PERSONALIZED BY REGISTERING
*Canadian residents are
not required to create a
profile, as one is created
when a Uconnect Connected
Services account is activated.
Registration is
simple. Scan the
QR code below
and provide your
email address
to get started.
!!

Wireless Charging Pad
Scan For
Wireless
Charging Video
YOUR VEHICLE MAY BE EQUIPPED
WITH A 15W 3A QI WIRELESS CHARGING PAD
FOR YOUR SMARTPHONE
Your phone case may interfere with wireless charging.
KEEP IN MIND:
WIRELESS CHARGER & VOICE RECOGNITION
Scan For Voice
Recognition
Video
Using Android Auto™Or Apple CarPlay®?
You can use Voice Recognition with Android Auto™and Apple CarPlay®!
Activate Android Auto™or Apple CarPlay®from “Device Manager” in Phone Mode. The respective icon
will replace the Phone icon in the menu bar.
Voice Recognition
USE YOUR VOICE TO CONTROL UCONNECT
If your Uconnect system is equipped with Navigation, you have access to built-in Voice Recognition.
If your Uconnect system is not equipped with Navigation, refer to the following Android Auto™or
Apple CarPlay®instructions.
There may be an
inconsistent volume
between different
audio sources.
KEEP IN MIND:
Answer
Incoming Call
Start Voice
Recognition
End Call
After the beep, say a command. Below are a few examples:
• “Tune to 95.5.”
• “Call <phone contact>.” • “Change Source to FM.”
• “Call 123-456-7891.” • “Navigate to <desired location>.”
22
Push the Voice Recognition button or say the Uconnect “Wake Up” word to begin. The “Wake Up”
word is customizable within Vehicle settings. You can set it to “Hey, Uconnect” or “Hey, Ram”.
11

Head Up Display
CUSTOMIZE THE INSTRUMENT CLUSTER DISPLAY
Content & Layout has four layout options:
Standard, Simple, Advanced, and Custom.
TIP:
Instrument Cluster Display
Control Buttons
Display On Windshield
Select “Settings” with the Up or Down Arrow button on
the steering wheel.
11
Select “HUD” with the Right or Left Arrow button on the
steering wheel. Press “OK”.
22
Adjust available Settings like Content & Layout, Display
Height, and Brightness. Press “OK” to change the setting.
33
CUSTOMIZE YOUR CONTENT & LAYOUT
Select “Custom” and begin customizing your Cluster layout from the Uconnect system.
Pick a display layout of two, three, four, or five icons. Drag and drop the icons to the provided zones
on the touchscreen!
Displays current gear
the vehicle is in.
Displays current speed
limit information.
Displays Driver Assist,
Cruise Control, Adaptive
Cruise Control, and
LaneSense information.
Displays upcoming
Navigation directions.
Displays vehicle speed.
CONFIGURE YOUR HEAD UP DISPLAY
Scan For
Head Up
Display Video

OFF-ROAD PAGES View the status of your Off-Road Pages like Transfer Case, Pitch and Roll, and
Accessory Gauges. You can also access the Forward Facing Camera.
Uconnect 5/5 NAV
ACCESS YOUR MEDIA, PHONE, COMFORT AND VEHICLE SETTINGS, AND NAVIGATION
Customize your Home page with shortcut widgets. Now you can access your
favorite radio stations and your smartphone on the same screen!
Listen to all of your favorite radio stations, including SiriusXM®, and play music
from your USB or Bluetooth®device.
Pair your smartphone and make hands-free calls or send hands-free messages
to any of your contacts.
Too hot? Too cold? Set your vehicle's temperature through several climate control options.
Activate automatic climate control to keep your vehicle at the temperature you want.
Access radio and vehicle settings, like changing the radio display or adjusting the
brightness of the interior lights.
Having trouble finding a place? Enter an address or search from multiple points
of interest to navigate anywhere using Uconnect.
HOME
MEDIA
PHONE
COMFORT
VEHICLE
NAVIGATION
APPS Access any app installed on your Uconnect system.
ACCESS OFF-ROAD PAGES:
Press “Vehicle” on the touchscreen.
11
Press “Off-Road Pages”.
22
Select between the pages on the
left side of the touchscreen.
33
Swipe down to customize
Profile options
Press and drag an icon
to rearrange
Scan For
Radio Video
GET TO KNOW YOUR RADIO
Push and hold the Power
button on the radio's faceplate
for a minimum of 15 seconds
to reset the radio.
KEEP IN MIND:
• 8.4-inch or 12-inch
Touchscreen Display
• SiriusXM®360L
•Android AutoTM/Apple CarPlay®
• Reconfigurable Menu Bar
• Connected Vehicle Services
• Amazon Alexa Integration
• User Profiles
RADIO HIGHLIGHTS:

©2022 FCA US LLC. All Rights Reserved. Tous droits réservés. Ram is a registered trademark of FCA US LLC. Ram est une marque déposée de FCA US LLC.
App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.
Warning & Indicator Lights
For additional information on any of the topics in this publication, please refer to your Owner’s Manual.
Fourth Edition
DT_QSG_EN_USC_BA
Forward Collision
Warning (FCW) Off
Engine Check/
Malfunction
Air Suspension Ride
Height Lowering
Air Suspension Fault
4WD
Seat Belt Reminder
Electronic Throttle
Control (ETC)
Air Bag
Rear Axle Lock
Service Stop/Start
System
Water In Fuel
Battery Charge Brake Door Open Electric Power
Steering (EPS) Fault
Engine Coolant
Temperature Hood Open Oil Pressure
Tailgate Open Transmission
Temperature
Trailer Brake
Disconnected
Air Suspension
Aerodynamic Height
Adaptive Cruise
Control (ACC) Fault
4WD LOW4WD HIGH
Air Suspension
Payload Protection
Air Suspension
Off-Road 2
Rear Axle Locker Fault
Low Diesel Exhaust
Fluid (DEF)
Electric Park Brake (EPB)
Air Suspension Ride
Height Raising
Wait To Start
Service LaneSense
NEUTRAL
Entry/Exit
Cruise Control Fault
Cargo Light
Anti-Lock Brake
System (ABS)
4WD AUTO
Tire Pressure Monitoring
System (TPMS)
Electronic Stability
Control (ESC) Active
Service 4WD
TOW/HAUL
Adaptive Cruise Control (ACC)
Set With No Target Detected
Low Fuel
Electronic Stability
Control (ESC) OFF
Trailer Merge Assist
Service Forward
Collision Warning (FCW)
Low Washer Fluid
Oil Temperature
Vehicle Security
ECO Mode Front Fog Lights LaneSense
Adaptive Cruise Control (ACC)
Set With Target Detected
Parking/Headlights On
Cruise Control Set
Stop/Start Active
Air Suspension
Off-Road 1
Air Suspension
Normal Height
LaneSense
Turn Signal Adaptive Cruise
Control (ACC) Ready Cruise Control Set Hill Descent
Control (HDC)
Cruise Control Ready
High Beam
Table of contents
Other Ram Trucks Automobile manuals