RAMTONS RW/135 User manual

RW/135

..................................
............................................................................Function of each Button.

Connect: Push down the slide jacket of
speedy connector (4 small
balls must be exposed ),
insert it into the connection
socket and then push upward.
Release the connection of
water tap with speedy
connector is completed. If it
is required to feed water,
simply open the water tap.
Separate: Close the water tap, push
down the slide jacket of
speedy connector and pull
out the speedy connector.
Separate
+
+
7
Unscrew four screws of part
A and sleeve part A horizontally
over the mouth at the end of
water tap (the mouth at the end
of water tap must be flat and
smooth. Flatten it by filing if it is
not flat) and push it upward with
force making the rubber washer
firmly press the plane center of
water tap mouth. Then tighten
the screw sequentially.
After that, tightly screw on part B.
Push down the slide jacket to
expose the small ball and
enable separation of connector
socket from speedy connector.
! Remove package and take out the bottom
board of the cabinet on the foam cover.
! Open the lid of washer's door and take out
accessories.
! A trial operation or washing on the foamed
cushion is strictly forbidden.

Upper drain hose
(For upper drain only)
Top lid
Water inlet valve
Upper drain hose
Power Cord
Handle
Cabinet
Cabinet handle
Adjustable foot knob
Wash Spin barrel·
Filter Holder
Control panel
Impeller
powder and liquid
detergent box
(for upper drain only)
+
+
750mm-1200mm

WAT ER
Press the Temp. button
to select wash water
temperature.
TEM P BU T TON
Press the Wash button, the Rinse
button & the Spin button to select
wash time, rinse times & spin time
respectively you want to store.
Use to lock or unlock the control buttons to
prevent settings from being changed by a
child. To lock, push the Wash and buttons
simultaneously and to unlock push them one
more time during the washing process.
Rinse
•
•This button allows you to select
different programs for different
kinds of laundry and dirtiness.
Use for selecting wash program.
After choosing a program, the user can press FCS
button (the FCS light up) to start the function, making
the program shorter and good washing performance.
Press the FCS button again to cancel this function.
Check levelness of washer
LEVEL Not Level
Function of each Button

Normal program
1.Press the power .
2.
3.Press the button.
button
Press the button to select .Program Normal program
Start/Pause
Normal program is the easiest, most convenient and most common washing
program.
Instruction to self-programmed procedure
!
!
User can freely select any combination among WASH, RINSE and SPIN
modes according to the dirty degree of clothes.
Detail operation methods are following:
Continuously pressing the washing button to select washing time.
Continuously pressing the rinse button to select rinse times.
Continuously pressing the spin button to select the spin time.
Rinse Only Function
1. Press the Power button to turn power on.
2. Press the Rinse button to select the desired times of rinse.
3. Press the Spin button to adjust spin time to 0 minutes.
4. Press the Start/Pause button.
Spin Only Function
1. Press the Power button to turn power on.
2. Press the Spin button to select the desired time of spin.
3. Press the Start/Pause button.

53kg
14.0kg
14.0kg
Upper draining
55
640X680X1025
Net Weight
Size
RW/135
220V~ /50Hz