RaxGo RAXFBS User manual

User Guide
Sku: RAXFBS
FLOOR BIKE RACK
STATION

2
Thank you for purchasing the RaxGo™ Floor Bike Rack Station. This User Guide
is intended to provide you with guidelines to ensure that operation of this product
is safe and does not pose risk to the user. Any use that does not conform to the
guidelines described in this User Guide may void the limited warranty.
Please read all directions before using the product and retain this guide for
reference. This product is intended for household use only. It is not intended for
commercial use.
This product is covered by a limited one-year warranty. Coverage is subject to
limits and exclusions. See warranty for details.
SAFETY PRECAUTIONS
CONTENTS
ASSEMBLY INSTRUCTIONS
SPECIFICATIONS
WARRANTY
3
4
5
7
8
TABLE OF CONTENTS

3
• CHOKING HAZARD: This product contains small parts and is not suitable
for children under 3 years old.
• Remove all packaging materials before using this device. Please keep all packaging
materials out of reach of children and pets.
• Properly dispose of all packing materials immediately after unpacking product, as
the bags used for packaging could present a suocation or choking hazard.
• Read all instructions carefully before attempting to operate this device. Improper
usage or installation could result in injury or a reduction in ecacy.
• Do not let children sit, climb, or play on the rack as this can cause accidents, injuries,
or damage the bike rack station.
• Always use appropriate care when parking bicycles and placing items in the rack.
SAFETY PRECAUTIONS

4
CONTENTS
1 x Floor panel (A)
6 x Vertical rack legs (C)
1 x Horizontal support bar (E)
4 x Removable hooks (G)
4 x Adjustable feet pads (H) 24 x Bolts
User guide
1 x Storage basket (F)
1 x Connector bar (D)
2 x Support legs (B)

5
ASSEMBLY INSTRUCTIONS
REQUIRED TOOL:
• Wrench
INSTALLING SKI RACK
1. Place the oor panel (A) at on the ground. Then, connect the bottom parts of the
two (2) support legs (B) to the oor panel. Insert four (4) bolts into the aligned holes
on the two (2) bottom holes on each of the support legs and tighten them using
your wrench. Once the support legs are connected, place the support legs on the
ground (revealing the underside of the legs). Then, insert and screw in the four (4)
adjustable feet pads (H).
2. Keep the support legs (B) on the ground where you can see the underside of the oor
panel (A). Align the holes of the oor panel with the holes at the end of the vertical
rack leg (C). Insert the bolt and tighten it. Do the same for the ve (5) other vertical
rack legs.
A
B
B
H

6
3. Stand the assembly back up. Take the connector bar (D) and align the holes of the
connector bar with the top ends of the vertical rack legs (C). Insert the bolts and
tighten them. Then, align holes at both ends of the connector bar to the hole on the
two (2) support legs. Insert two (2) bolts and screw them in securely.
4. Take the horizontal support bar (E) and t it in between the support legs (B). Use the
bolts in the aligned holes to t it securely in place. See image below for the exact
horizontal support bar placement:
C
D
E
B
B
B
B

7
SPECIFICATIONS
Dimensions: 35.4″ x 21.6″ x 40.9″ (13.9 x 8.5 x 16.1 cm)
Weight: 22 lbs. (10 kg)
Material: Steel
5. Place and secure storage basket (F) at the top of the assembly in between the
support legs (B). Align the holes and insert the bolts, two (2) on each side, securely.
6. Lastly, attach the four (4) removable hooks (G) on the top bars of the support legs (B).
B
B
F
G

8
WARRANTY
LIMITED WARRANTY TO ORIGINAL CONSUMER
TThis RaxGo™ Floor Bike Rack Station (“Product”), including any accessories included in the original
packaging, as supplied and distributed new by an authorized retailer is warranted by C&A Marketing,
Inc. (the “Company”) to the original consumer purchaser only, against certain defects in material and
workmanship (“Warranty”) as follows:
To receive Warranty service, the original consumer purchaser must contact the Company or its authorized
service provider for problem determination and service procedures. Proof of purchase in the form of a bill
of sale or receipted invoice, evidencing that the Product is within the applicable Warranty period(s), MUST
be presented to the Company or its authorized service provider in order to obtain the requested service.
Service options, parts availability, and response times may vary and may change at any time. In accordance
with applicable law, the Company may require that you furnish additional documents and/or comply with
registration requirements before receiving warranty service. Please contact our customer service for
details on obtaining warranty service:
Email: [email protected]
Phone: [phone]
Shipping expenses to the Company’s Return Facility are not covered by this warranty, and must be paid by
the consumer. The consumer likewise bears all risk of loss or further damage to the Product until delivery
to said facility.
EXCLUSIONS AND LIMITATIONS The Company warrants the Product against defects in materials and
workmanship under normal use for a period of ONE (1) YEAR from the date of retail purchase by the
original end-user purchaser (“Warranty Period”). If a hardware defect arises and a valid claim is received
within the Warranty Period, the Company, at its sole option and to the extent permitted by law, will either
(1) repair the Product defect at no charge, using new or refurbished replacement parts, (2) exchange the
Product with a Product that is new or which has been manufactured from new or serviceable used parts
and is at least functionally equivalent to the original device, or (3) refund the purchase price of the Product.
A replacement Product or part thereof shall enjoy the warranty of the original Product for the remainder of
the Warranty Period, or ninety (90) days from the date of replacement or repair, whichever provides you
longer protection. When a Product or part is exchanged, any replacement item becomes your property,
while the replaced item becomes the Company’s property. Refunds can only be given if the original
Product is returned.
This Warranty does not apply to:
(a) Any non-RaxGo™ Floor Bike Rack Station product, hardware or software, even if packaged or sold with
the Product;
(b) Damage caused by use with non-RaxGo™ Floor Bike Rack Station products;
(c) Damage caused by accident, abuse, misuse, ood, re, earthquake, or other external causes;
(d) Damage caused by operating the Product outside the permitted or intended uses described by the
Company;
(e) Damage caused by third party services;
(f) A Product or part that has been modied to alter functionality or capability without the written
permission of the Company;
(g) Consumable parts, such as batteries, fuses and bulbs;

9
Need Assistance? We Want to Hear from You!
[email protected] | 1-833-722-0121
RAXGO is a trademark of C&A IP Holdings, LLC in the US.
All other products, brand names, company names, and logos are trademarks of their respective owners, used merely to identify their
respective products, and are not meant to connote any sponsorship, endorsement, or approval.
Distributed by C&A Marketing, Inc., 114 Tived Lane East, Edison, NJ 08837. Made in China.
© 2020. C&A IP Holdings, LLC. All Rights Reserved.
(h) Cosmetic damage; or
(i) If any RaxGo™ Floor Bike Rack Station serial number has been removed or defaced.
This Warranty is valid only in the country where the consumer purchased the Product, and only applies to
Products purchased and serviced in that country.
The Company does not warrant that the operation of the Product will be uninterrupted or error-free. The
Company is not responsible for damage arising from your failure to follow instructions relating to its use.
NOTWITHSTANDING ANYTHING TO THE CONTRARY AND TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE COMPANY PROVIDES THE PRODUCT “AS-IS” AND “AS-AVAILABLE” FOR YOUR
CONVENIENCE AND THE COMPANY AND ITS LICENSORS AND SUPPLIERS EXPRESSLY DISCLAIM
ALL WARRANTIES AND CONDITIONS, WHETHER EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING
THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, QUIET
ENJOYMENT, ACCURACY, AND NON-INFRINGEMENT OF THIRD-PARTY RIGHTS. THE COMPANY DOES
NOT GUARANTEE ANY SPECIFIC RESULTS FROM THE USE OF THE PRODUCT, OR THAT THE COMPANY
WILL CONTINUE TO OFFER OR MAKE AVAILABLE THE PRODUCT FOR ANY PARTICULAR LENGTH OF
TIME. THE COMPANY FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY
PERIOD STATED ABOVE.
YOU USE THE PRODUCT AT YOUR OWN DISCRETION AND RISK. YOU WILL BE SOLELY RESPONSIBLE
FOR (AND THE COMPANY DISCLAIMS) ANY AND ALL LOSS, LIABILITY, OR DAMAGES RESULTING FROM
YOUR USE OF THE PRODUCT.
NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM THE COMPANY
OR THROUGH ITS AUTHORIZED SERVICE PROVIDERS SHALL CREATE ANY WARRANTY.
IN NO EVENT WILL THE COMPANY’S TOTAL CUMULATIVE LIABILITY ARISING FROM OR RELATED TO
THE PRODUCT, WHETHER IN CONTRACT OR TORT OR OTHERWISE EXCEED THE FEES ACTUALLY PAID
BY YOU TO THE COMPANY OR ANY OF ITS AUTHORIZED RESELLERS FOR THE PRODUCT AT ISSUE
IN THE LAST YEAR FROM YOUR PURCHASE. THIS LIMITATION IS CUMULATIVE AND WILL NOT BE
INCREASED BY THE EXISTENCE OF MORE THAN ONE INCIDENT OR CLAIM. THE COMPANY DISCLAIMS
ALL LIABILITY OF ANY KIND OF ITS LICENSORS AND SUPPLIERS. IN NO EVENT WILL THE COMPANY
OR ITS LICENSORS, MANUFACTURERS AND SUPPLIERS BE LIABLE FOR ANY INCIDENTAL, DIRECT,
INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL 29 DAMAGES (SUCH AS, BUT NOT LIMITED TO,
DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE,
MISUSE OR INABILITY TO USE THE PRODUCT.
Nothing in these terms shall attempt to exclude liability that cannot be excluded under applicable law.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential
damages or allow limitations on warranties, so certain limitations or exclusions may not apply to you. This
warranty gives you specic legal rights, and you may have other rights that vary from state to state or
province to province. Contact your authorized retailer to determine if another warranty applies.