RaxGo RAXWMTBR User manual

RAXWMTBR
User Guide
Tool and Bike
Storage Rack
Thank you for purchasing the RaxGo™Tool and Bike Storage Rack. This
User Guide is intended to provide you with guidelines to ensure that operation
of this product is safe and does not pose risk to the user. Any use that does
not conform to the guidelines described in this User Guide may void the
limited warranty.
Please read all directions before using the product and retain this guide for
reference. This product is intended for household use only. It is not intended
for commercial use.
This product is covered by a limited one-year warranty. Coverage is subject
to limits and exclusions. See warranty for details.
raxgo.com
RAXGO is a trademark of C&A IP Holdings, LLC in the US.
All other products, brand names, company names, and logos are trademarks of their respective
owners, used merely to identify their respective products, and are not meant to connote any
sponsorship, endorsement or approval.
Distributed by C&A Marketing, Inc., 114 Tived Lane East, Edison, NJ 08837.
Made in China.
© 2020. C&A IP Holdings, LLC. All Rights Reserved.
LIMITED WARRANTY ON RAXGO™TOOL AND BIKE STORAGE RACK
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
WE WARRANT THAT DURING THE WARRANTY PERIOD, THE PRODUCT WILL BE
FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP.
LIMITATION OF LIABILITY
TO THE EXTENT NOT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, ORAL, WRITTEN, STATUTORY, EXPRESS OR
IMPLIED. EXCEPT FOR THE EXPRESS WARRANTIES CONTAINED IN THIS LIMITED
WARRANTY STATEMENT AND TO THE EXTENT NOT PROHIBITED BY LAW, WE
DISCLAIM ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, STATUTORY OR
OTHERWISE, INCLUDING WITHOUT LIMITATION, THE WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME STATES DO NOT
ALLOW DISCLAIMERS OF IMPLIED WARRANTIES, SO THIS DISCLAIMER MAY NOT
APPLY TO YOU. TO THE EXTENT SUCH WARRANTIES CANNOT BE DISCLAIMED
UNDER THE LAWS OF YOUR JURISDICTION, WE LIMIT THE DURATION AND
REMEDIES OF SUCH WARRANTIES TO THE DURATION OF THIS EXPRESS LIMITED
WARRANTY.
OUR RESPONSIBILITY FOR DEFECTIVE GOODS IS LIMITED TO REPAIR, REPLACE-
MENT OR REFUND AS DESCRIBED BELOW IN THIS WARRANTY STATEMENT.
WHO MAY USE THIS WARRANTY? C&A Marketing, Inc. located at 114 Tived Lane
East, Edison, NJ (“we”) extend this limited warranty only to the consumer who originally
purchased the product (“you”). It does not extend to any subsequent owner or other
transferee of the product.
WHAT DOES THIS WARRANTY COVER? This limited warranty covers defects in
materials and workmanship of the RaxGo™Tool and Bike Storage Rack (the “product”)
for the Warranty Period as defined below.
WHAT DOES THIS WARRANTY NOT COVER? This limited warranty does not cover
any damage due to: (a) transportation; (b) storage; (c) improper use; (d) failure to
follow the product instructions or to perform any preventive maintenance; (e) modifica-
tions; (f) unauthorized repair; (g) normal wear and tear; or (h) external causes such as
accidents, abuse, or other actions or events beyond our reasonable control.
WHAT IS THE PERIOD OF COVERAGE? This limited warranty starts on the date of
your purchase and lasts for one year (the “Warranty Period”). The Warranty Period is
not extended if we repair or replace the product. We may change the availability of this
limited warranty at our discretion, but any changes will not be retroactive.
WHAT ARE YOUR REMEDIES UNDER THIS WARRANTY? With respect to any
defective product during the Warranty Period, we will, at our sole discretion, either: (a)
repair or replace such product (or the defective part) free of charge or (b) refund the
purchase price of such product if an exchange unit cannot be provided.
HOW DO YOU OBTAIN WARRANTY SERVICE? To obtain warranty service, you
must contact us at 1-833-722-0121 or by email at [email protected] during the
Warranty Period to obtain a Defective Merchandise Authorization (“DMA”) number. No
warranty service will be provided without a DMA number and return shipping costs to
our facilities shall be assumed by you, the purchaser. Shipping costs of the replacement
unit to you shall be assumed by us.
Need Assistance?
We Want to Hear from You!
[email protected]
1-833-722-0121

• This rack is intended for use with tools and bikes only. Do not attempt to
mount other objects/persons on the rack.
• The screws supplied with this tool and bike rack are intended for use with
brick and/or concrete walls only.
• Always use appropriate care when working with mounting hardware
and tools.
• Do not overload the rack or else it may damage the product and/or the
mounting surface.
A Note on Fasteners
While standard fasteners and anchors intended for use with concrete and/or
brick walls are included with this storage rack, it remains the responsibility of
the person installing the storage rack to determine which fastener type should
be used for each specific installation and/or type of substrate. Please ensure
that appropriate pullout tests are performed prior to installation.
If you are unsure about what type of mounting hardware you should use, please
ask a professional for assistance.
In no event shall RaxGo™be liable for any direct, special, punitive, exemplary,
indirect, or consequential damages resulting from improper installation, misuse,
and/or use of the product beyond its limitations and/or intended purpose.
This includes, without limitations, overloading of the product and/or use of
the product under extreme or abnormal conditions, either intentionally or
as a result of user error.
1. Package Contents
2. Safety Precautions
Tools Required:
• Impact Drill (with 10 mm Drill Bit)
• Hexagon Head Screwdriver
NOTE: The two racks included may be used together or separately.
1. Slide a bracket on to the rail to create a template rack for placement. Place
your template rack in the desired location and mark the holes on the wall.
(Make sure to locate the studs in the wall if applicable, e.g., if installing
on drywall.)
NOTE: The eight (8) black hex nuts should come connected to the eight (8)
M6 x 50 mm screws. Simply unscrew the hex nuts to separate them.
2. Drill holes with the impact drill using a 10 mm drill bit at the marked points
(about 60 mm deep). Place wall anchors inside drilled holes. Then insert
four (4) of the M6 x 60 mm screws through the bracket into the wall
anchors and use your hexagon head screwdriver to screw them in place.
NOTE: If you are installing the rack to a wood wall or into studs,
use your hexagon head screwdriver to screw four (4) of the M6 x 60 mm
screws through the bracket at the marked points on the wall. (Wall anchors
are not needed for wood walls and studs.)
3. Line up the holes of the bracket and the holes of the rail. Next, place the
M6 x 50 mm screws in the aligned holes. Then, tighten the nuts on the
other end of the screw to stabilize rail.
4. Slide the desired hooks onto the rail from the open end.
5. Slide the second bracket onto the other end of the rail. Insert another
two (2) M6 x 50 mm screws through the holes of the bracket and rail
then tighten with the nuts. Finally, insert the four (4) M6 x 60 mm
screws into the bracket and screw into the wall.
6. Repeat the process in a dierent desired location for the second rack.
(Again, note that you can combine the rails together by lining up the
holes if desired.)
600 mm Rails (2)
Tool Hooks (4)
Wall Anchors (16)Hex Nuts (8) User Guide
3. Installation Instructions
Brackets (4)
Bike Hooks (2)
M6 x 50 mm
Screws (8) M6 x 60 mm Screws (16)