Recreation Supply CC-34VC-50 User manual

Recreation Supply Co., Inc.
P.O. BOX 2757  BISMARCK, N 58502  [phone]  FAX [phone]
Self-Priming Portable
Electric Pump

SELF-PRIMING PORTSELF-PRIMING PORT
SELF-PRIMING PORTSELF-PRIMING PORT
SELF-PRIMING PORTABLE ELECTRIC PUMPABLE ELECTRIC PUMP
ABLE ELECTRIC PUMPABLE ELECTRIC PUMP
ABLE ELECTRIC PUMP
SUCTION
PRIMER
ASSEMBLY
CORD W/ CORD RACK
HANDLE
DISCHARGE
PUMP
SUCTION
HEAVY GUAGE STEEL
PUMP CART
RSC Item Number:
Document Title:
Section:
The information contained herein is confidential and the property of Recreation Supply Company, Inc. No duplications are permitted without the written permission of Recreation Supply Co., Inc.
Recreation Supply Company, Inc.
P.O. Box 2757 Bismarck, N 58502 www.RecSupply.com

SELF-PRIMING PORTSELF-PRIMING PORT
SELF-PRIMING PORTSELF-PRIMING PORT
SELF-PRIMING PORTABLE ELECTRIC PUMPABLE ELECTRIC PUMP
ABLE ELECTRIC PUMPABLE ELECTRIC PUMP
ABLE ELECTRIC PUMP
ASSEMBLASSEMBL
ASSEMBLASSEMBL
ASSEMBLY INSTRUCTIONSY INSTRUCTIONS
Y INSTRUCTIONSY INSTRUCTIONS
Y INSTRUCTIONS
1. Unpack all boxes and check for damaged equipment.
2. Assemble cart for vacuum as instructions in box indicate.
3. Place motor on cart and bolt down with supplied hardware.
4. With thread sealing compound in pump motor box (thread sealer not supplied),
attach discharge fitting on pump discharge. Do not over tighten.
5. With thread sealing compound attach pump suction to suction side of electric
pump. Suction assembly has line to show direction of flow for proper installation.
If installed correctly the priming valve will be vertical with the ground. Do not over
tighten.
6. Note: This unit is not supplied with a ground fault interrupt. A ground fault interrupt
is needed for safe operation of this unit. Do not plug pump into an outlet without
installed ground fault interrupt.
If you have any questions on the assembly or operation of this pump cart contact
customer service at 1-800-437-8072.

SELF-PRIMING PORTSELF-PRIMING PORT
SELF-PRIMING PORTSELF-PRIMING PORT
SELF-PRIMING PORTABLE ELECTRIC PUMPABLE ELECTRIC PUMP
ABLE ELECTRIC PUMPABLE ELECTRIC PUMP
ABLE ELECTRIC PUMP
PRIMING INSTRUCTIONS PRIMING INSTRUCTIONS
PRIMING INSTRUCTIONS PRIMING INSTRUCTIONS
PRIMING INSTRUCTIONS
1. This electric pump cart is to be used in conjunction with an electric ground fault
interrupt. This unit is not supplied with a ground fault interrupt. Make sure the
electrical outlet you are using is supplied with a ground fault interrupt!
2. Fill vacuum hose with water and attach to the suction assembly.
3. Connect fresh water supply to priming valve on pump.
4. Open priming valve allowing pump strainer to fill with water.
5. Once the strainer is full pump can now be turned on. Never run pump dry!
This will damage the seals and the electric motor.
6. Once pump is in operation the priming valve can be closed.
7. If you have a problem with the pump priming check all fittings and vacuum hose
for leaks. If the pump motor hums and does not turn over please contact cus-
tomer service.
If you have any questions on the assembly or operation of this unit please contact
customer service at 1-800-437-8072.
Recreation Supply Co., Inc.
P.O. BOX 2757  BISMARCK, N 58502  [phone]  FAX [phone]