Red Shed 1425363 User manual

CROSS BACK 3 PC METAL SET
Instruction Manual
SKU# 1425363
Please read instructions carefully before use. Retain for future reference
Distributed by:
TRACTOR SUPPLY COMPANY
5401 VIRGINIA WAY,
BRENTWOOD TN 37027
For customer support,
call: 1-888-376-9601
www.TractorSupply.com
MADE IN CHINA
Approximate
assembly time: 30 Minutes People
for assembly:
Required assembly space:
Floor area 9 ft. x 9 ft. (3 m x 3 m)
Required assembly tools (included):
M6
Assembled Dimensions
Required assembly tools (not included):
1
28in
2712
in
21
35 in
24 in
12
34
in

bottom metal center ring
E
F
G
D
F
F
B
A1
A2
C
PART LIST
A1
No. Description Quantity No.
left arm
A2 right arm
Bchair back
Cchair seat
Etable top
(attached with 6pc bolts and 6pc washers)
Ftable leg
(attached with 1pc bolt and 1pc washer for each)
Gtop metal center ring
D
Description Quantity
2
2
2
2
1
3
1
1
HARDWARE LIST
4 sets + 1 spare set
Long bolt
H1
12 sets + 1 spare set
Medium bolt
4 sets + 1 spare set
Short bolt
H2
H3
H4 3 sets + 1 spare set
Screw
2

CARE AND MAINTENANCE
* Always inspect the product during each use for any obstructions.
* The manufacturer will not accept responsibility for unauthorized repairs or modifications to this product.
* To clean, wash frame with mild soap and water; rinse thoroughly. Dry frame completely.
* Do not use bleach, acid, or other solvents on the frame parts.
* To prolong the life of your furniture we recommend storage in a dry area when not in use or during austere
weather conditions.
* Annually:
* Check all nuts and bolts for tightness each season and more often if used frequently.
* Oil all metal moving parts with a general purpose lubricating oil to ensure proper performance
and safety.
* Keep children away during assembly. This item contains small parts which can be swallowed by children.
Children should always be under adult supervision while using this product.
* This product is for residential use only, not for commercial use.
WARNING
TIP BEFORE YOU START
* Ensure that all parts are present prior to assembly.
* Check all packing material carefully before discarding, as some parts may be encased in the packing material.
* For ease and speed of assembly, it is recommended that prior to each step all required parts are identified.
* Ensure that you have sufficient space and people (as indicated on page 1) to assemble product safely.
* During assembly take care not to over-tighten any fittings, as this may damage the product.
WEIGHT LIMIT
Chair: 225lb. (102kg)
3

ASSEMBLY INSTRUCTIONS
1
Do not tighten completely. Repeat procedure for the other side.
H1 2 sets
Short bolt M6
2
Do not tighten completely. Repeat procedure for the other side.
H2 M6
2 sets
Medium bolt
3
Do not tighten completely. Repeat procedure for the other side.
H2 M6
4 sets
Medium bolt
SIDE
4
BC
BC
C
H1
B
B
C
H2
A1
A2
B
C
H2
H2

ASSEMBLY INSTRUCTIONS
5
Do not tighten completely. Repeat procedure for the other two legs.
H1 6 sets (remove from the tabletop)
Short bolt M6
5
4
A1
A2
B
H3
Securely tighten all bolts. Repeat procedure for the other chair.
H3 M6
2 sets
Long bolt
E
F
H1

ASSEMBLY INSTRUCTIONS
6
Do not tighten completely. Repeat procedure for the other two legs.
H2 M6
3 sets (remove from the legs)
Medium bolt
7
Securely tighten all bolts.
H4 3 sets
Screw
6
G
F
H2
D
F
H4