RED SHIELD Boltek Zumi IPC-135 User manual

User Manual
Model No.IPC-135
Remote access,motion detection
alert & two-way audio
ZMI •IP-Camera
Red Shield
S E N S O R S ERIES

Part A – Introduction
1. Package Contents
2. Product Introduction
Part B – Start Guide
3. Prepare for Starting
3.1 Connecting to your home network
3.2 Login the "BOLTEK" app
3.3 Entry from “System Control"
4. Getting Started
4.1 Connect hard ware
4.2 Add new device from your app
4.3 Link up to Smart Panel
4.4 Successfully added a device on the app
5. Locating Zumi after Getting Started
5.1 Determine the location
5.2 Suggested camera positions
5.3 Wall / ceiling mounted
5.4 Adjusting the Camera Focus
Part C – Remote Control Using BOLTEK App
6. Live View and Setting
7. Camera Setting
8. Multi View
9. Event
10. Photo
11. Video
Part D – Working with the Smart Panel / Remote
12. Arm / Disarm the Smart Panel
13. Zumi triggered in Arm, Alert and Home Mode
14. Other Sensors Triggered Under ARM Mode
Part E – Maintenance and Tips
15. Maintenance of Equipment
16. Reset
Part F – Product Specs
Part G – Trouble Shooting and Customer Service
17. FAQ
18. Customer Contact Details
Index
1
2
6
11
12
12
13

Part A: Introduction
1. Package Contents
2. Product Introduction
• Zumi IP- Camera
Light sensor
Micro SD
Card Slot
Infrared
Audio amplification
LAN
Wifi antenna
DC input
Reset
Lens
Lens cover
Network indicator
Power indicator
Mic
• Wall mounting unit
• User manual • Quick setup guide• Screw pack
• Antenna x 2 • Power adaptor
1
Mounting bracket hole
Wall mounting hole
RF antenna

Part B: Start Guide
3. Prepare for Starting
3.1 Connecting to your home network
• Connect Zumi to your home internet network before getting started.
•
Connect the electrical outlet,power adaptor,Zumi & network router as shown above. Power ON Zumi and it will automatically
rotate camera lens for initialization, then release a network searching sound (an echo sound)
.
3.2 Login the "BOLTEK" app
Login “BOLTEK” (App for WS135 Home Protection System)
to the System Control page.
• You will need to get a WS135 Home Protection System Kit
(Does not come with this device. Please contact the local
distributor to purchase the full security kit).
• Install BOLTEK app from Apple App Store or Android
Google Play to your smartphone. It works with iPhone,
iPad, iPad mini, and iPod touch running iOS 7.0 or above
and Android devices running Android 4.0 or above.
2
BOLTEK 1
System ControlDevice List
Carrier 100%
Arm
Home
Disarm
Alert
System Control Settings Event History More
Emergency
Slide to Panic
SocketIP Cam Tem p.
Lo
to
•
STATUS
H
om
e
Al
er
t
Sy
stem
C
ontro
l
S
ettin
g
s
E
vent
Hi
stor
y
Mo
r
e
Emer
g
enc
y
S
lide to Pani
c
S
ocketIP
Cam
Carrier
100%
T
em
p.
BO
BOL
TEK
1
Sy
stem ControlDevice List
Carrier
100%
A
rm
H
Di
sa
rm
Al
t
STATUS
BOLTEK app
Adaptor
LAN cable LAN cable (Internet)
Power
Zumi Router
Adaptor
LAN cable (Internet)
Power
Zumi Router
Connect using LAN Cable
Connect using Wifi

3
3.3 Entry from "system control / IP CAM"
4. Getting Started
4.1 Connect hardware
• Connect Zumi to your home internet network (part 3.1 Hardware connecting solution), power on Zumi and wait for the
network searching sound (an echo sound).
4.2 Add new device from your app
• Tap on the icon of “Add Camera & Wi-Fi” at the
left bottom (Fig3.3)
• Adding a new device:
-If Zumi is connected via WiFi, please
choose “ WiFi Setup”.
-If Zumi is connected via LAN Cable, go
directly to “Search Cameras”.
IP Cam
BOLTEK 1
IP Camera
Back
Carrier 100%
Multi ViewAdd Camera & Wi-Fi
VideoEvent Photo
IP Cam
B
O
LTEK
1
IP
C
amer
a
Back
C
arrier 100
%
M
ulti Vie
w
Add Camera & Wi-F
i
Vi
deo
E
v
e
n
t
P
h
o
t
o
I
P Ca
m
Add Camera & Wi-FiAdd
C
amera & Wi-F
i
Add Camera & Wi-Fi
IP Camera
Carrier 100%
VideoEvent Photo
IP Cam
Wi-Fi Setup
Search Cameras
A
dd
C
amera & Wi-Fi
I
P
C
amera
C
arrie
r
1
00
%
V
i
deo
Ev
e
n
t
P
h
o
t
o
IP Ca
m
Wi-Fi
S
etu
p
Sea
r
c
h
Ca
m
e
r
as

Select your home WiFi SSID and input WiFi
password, Tap on “Config” when you hear the
network searching sound from the hardware.
A WiFi connected sound will indicate that Zumi has
linked to home WiFi. Select “Finish” to go back to
the first page.
Click “Search Camera” and Choose your device ID
from the device list pop-up. Follow the instruction to
link up Zumi to the main panel (refer to part 4.3).
Press “Check” that it is successfully connected on
the app.
Go to the Add Sensor mode of the BOLTEK smart
panel – “Settings” >”Add / Delete Sensor” >”Add
Mode”. Refer to BOLTEK Manual for detailed
information.
Trigger Zumi by producing motions such as a
hand-wave before the camera lens. A beep
indicates that Zumi has successfully enrolled to the
Smart Panel. Press DONE to go back.
4
4.3 Link up to the Smart Panel
4.4 Successfully added a device to the app
WiFi Setup Search Camera
DELETE
ADD MODE
BACK
ADD/DELETE SENSORS
01
02
03
MAGNET1
PIR1
REMOTE1
DELETE
ADD MODE
BACK
ADD/DELETE SENSORS
01
02
03
04
MAGNET1
PIR1
ZUMI1
REMOTE1
DONE ADD MORE
ADD SENSORS
YOU HAVE JUST ADDED
03 ZUMI1
Add Camera & Wi-Fi
IP Camera
Carrier 100%
VideoEvent Photo
IP Cam
Wi-Fi Setup
Search Cameras
Cancel
Refresh
Search Result
Zumi
XXXX-000000-XXXXX
Add
C
amera & Wi-Fi
I
P
C
amera
C
arrier 100
%
V
i
deo
Ev
e
n
t
P
h
o
t
o
IP Ca
m
C
ancel
R
e
f
res
h
S
earch Resul
t
Zu
m
i
XXXX
-000000-
XXXXX
Add Camera & Wi-Fi
IP Camera
Carrier 100%
VideoEvent Photo
IP Cam
Wi-Fi Setup
Search Cameras
A
dd
C
amera & Wi-Fi
I
P
C
amer
a
C
arrie
r
100
%
V
i
deo
E
v
e
n
t
Ph
o
t
o
I
P Cam
Wi-Fi
S
etu
p
Sea
r
c
h
Ca
m
e
r
as
VideoEvent Photo
IP Cam
Onekey Config
Back
Carrier 100%
Home-WiFI
SSID
Config
Finish
••••
Password
WPA2-PSK
Safe Mode
V
ideoEven
t
Photo
IP Ca
m
Oneke
y
Confi
g
B
ac
k
C
arrier
1
00
%
Ho
m
e
-WiFI
SS
I
D
C
onfi
g
Finish
••••
P
ass
w
o
r
d
WPA2-P
SK
S
afe Mod
e

5
Placed on bookshelf, cabinet etc.
73.5 mm
(2.9 inches)
Mounted on the wall Mounted on the ceiling
5. Locating Zumi after Getting Started
5.1 Determine the location
First, determine the location and monitor area of Zumi, which should be placed:
-Within a few feet of an electrical outlet.
-Within effective distance from BOLTEK: 100m (open area).
-In the most vulnerable rooms or near key points.
-Where better RF performance can be achieved.
-Away from direct sunlight.
-Away from extreme temperature sources (radiators, air conditioners etc.).
-Away from extremely humid & dusty environment.
*Connecting to your home network should not be affected.
5.2 Suggested camera positions:
5.3 Wall / ceiling mounted:
A wall mounting unit can be used for wall / ceiling mounting if
you do not want to hang the camera directly:
• Hold the fixed part (with two drilling holes) of the mounting unit against
the wall at the selected location and mark the points for drilling (Fig. 5.3 b).
• Drill the holes and insert wall plugs to the fixed wall mounting unit.
• Match mounting bracket hole at the bottom of Zumi to the wall
mounting unit, and screw it in.
• Aim Zumi at the area it is supposed to monitor by adjusting the
mounting bracket’s rotating screws (Fig. 5.3 c).
Mount Zumi using the screws provided:
• Hold the enclosed mounting template against the wall at the
selected location and mark the points for drilling (Fig. 5.3 a).
• Drill the holes and insert the wall plugs.
• Match the back plate of Zumi against the screws and hang it up.
Fig. 5.3 b
Fig. 5.3 c
Fig. 5.3 a

6
5.4 Adjusting the camera focus
If the camera’s view or focus is unsatisfactory after it has been mounted, you can adjust the camera lens by:
-Remove the lens cover by rotating anticlockwise a little.
-Rotate the ring of the lens clockwise or anticlockwise while watching the app in live view to optimize the view.
-Fix the lens cover back on.
Part C: Remote Control Using the BOLTEK App
6. Live View and Setting
Tap on the device (device has to be online) to see a live view of your home. Scroll up / down / left / right on the
screen to adjust the angle of Zumi so you can view every corner.
Framerate: 9 / 12 4908 B [1280x720] [b:256]
F
Framer
Framer
Framer
Framer
Framer
t9
ate: 9
ate: 9
ate: 9
ate: 9
ate: 9
/
/12
/12
/12
/12
/12
/ 12
4908
4908
490
490
490
490
[
[12
[1
[1
[1
[1
[1
[
72
x72
x72
x7
x7
x7
[
[b
[b:
[b
[b
[b
[b
[
]
]
]
]
20]
20]
720]
[
[
[
0]
20]
[
:2
:2
b:2
56]
56]
56]
2
2
2
56
56
56
28
128
128
0x
0x
0x
28
28
28
0
0x
08 B
08 B
08 B
[
B
B
B
B
B
B
P
r
eset
4908 B [1280x720] [b:256]
Framerate: 9 / 12
BOLTEK 1
IP CameraBack
Carrier 100%
Camera 01
Online
XTST-000048-DDAFF
Multi ViewAdd Camera & Wi-Fi
VideoEvent Photo
IP Cam
B
O
LTEK
1
IP
C
amer
a
Back
C
arrier
1
00
%
C
amera 01
Onlin
e
XTST-000048-DDAF
F
M
ulti Vie
w
Add Camera & Wi-F
i
V
ide
o
Even
t
Phot
o
IP Ca
m

7
• Tap on to quit and go back to the device list.
• Tap on or if Zumi is mounted on the wall or ceiling,
so as to adjust the angle to a normal view.
• Using the and buttons, you an swivel the camera
left to right or up and down for a full cycle instead of
scrolling the screen.
• Tap to choose your View Mode according your
network environment:
Preferred Speed: QVGA Resolution
Optimization: VGA Resolution
Preferred Quality: 720P Resolution
Framerate: 9 / 12 4908 B [1280x720] [b:256]
F
F
Framer
Framer
Framer
Framer
Framer
9
t9
ate: 9
ate: 9
ate: 9
ate: 9
ate: 9
/2
/12
/12
/12
/12
/ 12
/ 12
908
4908
4908
490
490
490
490
[2
[12
[1
[1
[1
[1
[1
[
2
72
x72
x72
x7
x7
x7
[b
[b
[b:
[b
[b
[b
[b
[
]
]
]
]
]
20]
20]
720]
[
[
[
0]
20]
[
:2
:2
b:2
56]
56]
56]
2
2
2
56
56
56
28
128
128
0x
0x
0x
28
28
28
0
0x
08 B
08 B
08 B
[
B
B
B
B
B
8 B
Pr
eset
P
r
eset
Framerate: 9 / 12 4908 B [1280x720] [b:256]
F
F
Framer
Framer
Framer
Framer
9
t9
ate: 9
ate: 9
ate: 9
ate: 9
/2
/12
/12
/12
/ 12
/ 12
908
4908
4908
490
490
490
[2
[12
[1
[1
[1
[1
[
[
2
72
x72
x7
x7
x7
[b
[b
[b:
[b
[b
[b
[
[
]
]
]
]
]
720]
72
[
[
[
0]
20]
]
[
b:2
b:2
56]
56]
]
2
2
56
56
128
128
0x
0x
28
28
0x
08 B
08 B
[
[
[
B
B
B
B
View Mode
Preferred Speed
Optimization
Preferred Quality
Framerate: 9 / 12 4908 B [1280x720] [b:256]
Rec
F
F
Framer
Framer
Framer
Framer
Framer
9
t9
ate: 9
ate: 9
ate: 9
ate: 9
ate: 9
/2
/12
/12
/12
/12
/12
/ 12
908
4908
4908
490
490
490
490
[2
[12
[1
[1
[1
[1
[1
[
2
72
x72
x72
x7
x7
x7
[b
[b
[b:
[b
[b
[b
[b
[
]
]
]
]
Rec
20]
20]
720]
[
[
[
0]
20]
[
:2
b:2
b:2
56]
56]
56]
2
2
2
56
56
56
28
128
128
0x
0x
0x
28
28
28
0
0x
08 B
08 B
08 B
[
B
B
B
B
B
B
P
reset
P
rese
t
Framerate: 9 / 12 4908 B [1280x720] [b:256]
F
F
Framer
Framer
Framer
Framer
9
t9
ate: 9
ate: 9
ate: 9
ate: 9
/2
/12
/12
/12
/12
/ 12
908
4908
4908
490
490
490
[2
[12
[1
[1
[1
[1
[
[
[
2
72
x72
x7
x7
x7
[b
[b
[b:
[b
[b
[b
[
[
[
]
]
]
]
720]
72
[
[
[
0]
20]
]
]
[
b:2
b:2
56]
56]
]
2
2
56
56
128
128
0x
0x
28
28
0x
08 B
08 B
[
[
[
B
B
B
B
• Select to set preset key zones. Adjust the live view to
your desired angle and area and set it by selecting a zone
number. You can set up to 16 zones.
Preset
Framerate: 9 / 12 4908 B [1280x720] [b:256]
F
F
Framer
Framer
Framer
Framer
Framer
9
t9
ate: 9
ate: 9
ate: 9
ate: 9
ate: 9
/12
/12
/12
/12
/12
/ 12
/ 12
4908
4908
4908
490
490
490
490
[12
[12
[1
[1
[1
[1
[1
[
72
72
x72
x7
x7
x7
x7
[b
[b
[b:
[b
[b
[b
[b
[
]
]
]
]
20]
20]
720]
[
[
[
0]
20]
[
:2
:2
b:2
56]
56]
56]
2
2
2
56
56
56
28
128
128
0x
0x
0x
28
28
28
0
0x
08 B
08 B
08 B
[
B
B
B
B
B
8 B
P
r
eset
Set PresetBack Preset
1111
1111
1012
3456
1234
5678
9000
Tap on the live view screen to see more setting options:
• Capture a screen shot or record a video by clicking on or
• Tap so that you can hold the Speaking button and
talk directly to someone at the camera side, not just hearing
voices.
Framerate: 9 / 12 4908 B [1280x720] [b:256]
F
F
Framer
Framer
Framer
Framer
ae
9
t9
ate: 9
ate: 9
ate: 9
ate: 9
ae 9
/12
/12
/12
/12
/12
/ 12
/
4908
4908
4908
490
490
490
90
[12
[12
[1
[1
[1
[1
[
[
[
72
72
x72
x7
x7
x7
[b
[b
[b:
[b
[b
[b
[b
[
[
]
]
]
]
]
720]
[
[
[
0]
20]
]
]
[
b:2
b
56]
56]
]
2
2
56
56
128
8
0x
0
28
28
0x
08 B
08
[
[
[
B
B
B
B
Preset
Preset
Press & hold the
mike to speak

8
• The Brightness and Contrast of the screen is adjustable using the and buttons.
7. Camera setting
Click on the button to access Zumi set-up details.
Camera 01 Settings
IP Camera
Carrier 100%
Record Settings
Delete Camera
Restart
Sensitivity
Camera Name
VideoEvent Photo
IP Cam
C
amera 01 Settin
gs
IP
C
amera
C
arrie
r
100
%
R
ecor
d
S
ettin
gs
D
elete
C
amera
R
estar
t
S
ensitivit
y
Ca
m
e
r
a
N
a
m
e
V
i
deo
Ev
e
n
t
Ph
o
t
o
IP Cam
BOLTEK 1
IP Camera
Back
Carrier 100%
Camera 01
Online
XTST-000048-DDAFF
Multi ViewAdd Camera & Wi-Fi
VideoEvent Photo
IP Cam
BOLTEK
1
IP
C
amer
a
Back
C
arrie
r
100
%
C
amera 0
1
O
nlin
e
XT
S
T-000048-DDAF
F
M
u
lti Vi
ew
A
dd Camera & Wi-F
i
V
i
deo
E
v
e
n
t
Ph
o
t
o
IP Ca
m
• Tap Infrared Lamp switch to do a night vision setting
so as Zumi can monitor all days and nights.
ON: Infrared Lamp on and Can see clearly even at nights
when there’s little to no light, but day view will turn to a
black and white version.
OFF: Infrared Lamp off, day view is colorful but can’t see
clearly under limited light condition
Auto Cut: Infrared Lamp will light up according to the light
sensor at the top of lens.
P
rese
t
Framerate: 9 / 12 4908 B [1280x720] [b:256]
F
F
Framer
Framer
Framer
Framer
9
t9
ate: 9
ate: 9
ate: 9
ate: 9
/12
/12
/12
/12
/ 12
/ 12
4908
4908
4908
490
490
490
[12
[12
[1
[1
[1
[1
[
72
72
x72
x7
x7
x7
[b
[b
[b:
[b
[b
[b
[
]
]
]
]
720]
72
[
[
[
0
20]
]
]
[
b:2
b:2
56]
56]
]
2
2
56
56
128
128
0x
0x
28
28
0x
08 B
08 B
[
[
[
B
B
B
B
Night Vision
ON
OFF
Auto Cut
Framerate: 9 / 12 4908 B [1280x720] [b:256]
F
Framer
Framer
Framer
Framer
Framer
t9
ate: 9
ate: 9
ate: 9
ate: 9
ate: 9
/12
/12
/12
/12
/12
/ 12
4908
4908
490
490
490
490
[12
[12
[1
[1
[1
[1
[
72
x72
x72
x7
x7
x7
[b
[b:
[b
[b
[b
[b
[
]
]
]
]
20]
20]
720]
[
[
[
0]
20]
[
:2
:2
b:2
56]
6]
56]
2
2
2
56
56
56
28
128
128
0x
0x
0x
28
28
28
0x
08 B
08 B
08 B
[
B
B
B
B
B
B
Pr
eset
Framerate: 9 / 12 4908 B [1280x720] [b:256]
F
Framer
Framer
Framer
Framer
Framer
t9
ate: 9
ate: 9
ate: 9
ate: 9
ate: 9
/12
/12
/12
/12
/12
/ 12
4908
4908
490
490
490
490
[12
[12
[1
[1
[1
[1
[
72
x72
x72
x7
x7
x7
[b
[b:
[b
[b
[b
[b
[
]
]
]
]
20]
20]
720]
[
[
[
0]
20]
[
:2
:2
b:2
56]
56]
56]
2
2
2
56
56
56
28
128
128
0x
0x
0x
28
28
28
0x
08 B
08 B
08 B
[
B
B
B
B
B
B
Pr
eset
• Brightness and Contrast settings of live view can be reset
by pressing
Framerate: 9 / 12 4908 B [1280x720] [b:256]
F
Framer
Framer
Framer
Framer
Framer
Framer
9
ate: 9
ate: 9
ate: 9
ate: 9
ate: 9
ate: 9
/12
/12
/12
/12
/12
/ 12
/ 12
4908
4908
490
490
490
490
490
[12
[12
[1
[1
[1
[1
[1
[
72
x72
x72
x7
x7
x7
x7
[b
[b:
[b
[b
[b
[b
[b
[
]
]
]
]
]
20]
20]
720]
[
[
[
0]
20]
[
:2
b:2
b:2
56]
56]
56]
2
2
2
56
56
5
28
128
128
0x
0x
0x
28
28
28
0x
08 B
08 B
08 B
[
B
B
B
B
B
8 B
P
rese
t
Cancel
Reset
Reset to default setting?
Record Settings
Delete Camera
Restart
Sensitivity
Camera Name
Record
Settings
Delete Camera
Restart
Sensitivity
Camera Name

9
• Camera Name: Customize the camera name here.
• Sensitivity: Adjust the sensitivity of the build-in motion detection.
• Restart: Select ”OK” from the Pop-up dialogue box to restart Zumi.
• Record Settings: Change record settings.
-
Check the memory status of the Micro SD Card. Delete selectively, overwrite completely or format the Micro SD Card.
- Customize the length of the recording from 1 to 5 minutes, default setting is 2 minutes.
- Switch on the ‘Time Recording’ function to preset a schedule for video recording.
• Delete Camera: Delete device.
8. Multi view
The “Multi View” windows enables you to view more than one camera concurrently if you have multiple Zumi units.
• Select up to 4 devices to view. Tap on any screen to expand to a full-screen view.
• Tap on to quit Multi View and back to IP Cam page.
Camera Name Sensitivity Restart Record Settings
MLS
Connection Sensitivity
Alarm Settings
Back
Carrier 100%
VideoEvent Photo
IP Cam
V
i
deo
E
v
e
n
t
P
h
o
t
o
I
P Ca
m
M
L
S
Connection Sensitivit
y
Alarm Settin
gs
Bac
k
C
arrie
r
100
%
Camera 01
Camera Name
Edit SettingsBack
Carrier 100%
Done
VideoEvent Photo
IP Cam
V
i
deo
C
amera 0
1
Ca
m
e
r
a
N
a
m
e
Edit Settin
gs
B
ac
k
C
arrier 100
%
D
on
e
E
v
e
n
t
P
h
o
t
o
IP Ca
m
Recorded Voice
Timer Recording
Format SD Card
Overwrite Record
SD Card Available Space (M) 12786 M
SD Card Total Capacity (M) 16000 M
Record Settings
Back
Carrier 100%
Record Length 2 min
VideoEvent Photo
IP Cam
R
ecor
d
e
d
V
o
i
ce
Ti
mer
R
ecor
di
ng
Format
S
D
C
ar
d
O
v
e
rwrit
e
R
eco
r
d
S
D
C
ard Available
S
pace
(
M
)
127
86
M
S
D
C
ard Total
C
apacity
(
M
)
1
6000
M
Record Settin
gs
B
ack
C
arrier
1
00
%
R
ecor
d
L
engt
h
2 m
in
Vi
deo
E
v
e
n
t
P
h
o
t
o
I
P Ca
m
Camera 01 Settings
IP Camera
Carrier 100%
Record Settings
Delete Camera
Restart
Sensitivity
Camera Name
VideoEvent Photo
IP Cam
Cancel
OK
Device will not be operational during
reboot.
Warning
Camera 01 Settin
gs
I
P Camera
C
arrier 100
%
Re
S
R
estart
S
ensitivity
Ca
m
e
r
a
N
a
m
e
Vi
deo
E
v
e
n
t
Ph
o
t
o
I
P Ca
m
Ca
n
cel
O
K
Device will not be operational durin
g
r
eboo
t
.
Warnin
g
Multi View
Camera 01
Online
XTST-000048-DDAFF
Multi View
Back
Carrier 100%
C
amera 0
1
O
nlin
e
XT
S
T-000048-DDAF
F
M
u
lti Vi
e
w
B
ack
C
arrier 100
%
Carrier 100%
C
arrier 100
%

10
9. Event
10. Photo
11. Video
The Event page provides a text log of all the
occasions Zumi was triggered.
The Photo page provides an image log of all the
occasions Zumi was manually taken by app user.
There are two kinds of video that can be
checked from the “Video ”page:
• Camera: The Triggered video saved at Micro
SD card inside Zumi.
• App: Video recorded manually by the App
user and saved on the phone.
Camera App
Alarm LogsBack
Carrier 100%
Motion Detected Dec 27, 2015
06:17 am
Motion Detected Dec 21, 2015
05:59 pm
Motion Detected Dec 12, 2015
07:40 pm
Motion Detected Nov 23, 2015
08:36 am
Motion Detected Nov 09, 2015
07:36 am
Motion Detected Oct 19, 2015
02:42 pm
Motion Detected Sep 07, 2015
05:49 am
Alarm Lo
gs
B
ac
k
Carrie
r
1
00
%
M
o
ti
o
n D
e
t
ec
t
ed
Dec 27
,
2015
06
:17
am
M
o
ti
o
n D
e
t
ec
t
ed
D
ec 21
,
2015
0
5:5
9
p
m
M
ot
i
on
D
etecte
d
D
ec 12
,
2015
07:40 p
m
M
ot
i
on
D
etecte
d
N
ov 23
,
2015
08
:
36
am
M
ot
i
on
D
etecte
d
N
ov 09
,
2015
0
7:
36
am
Motion Detecte
d
O
ct 19
,
2015
02:42
pm
Motion Detecte
d
S
ep 07, 2015
0
5:4
9
a
m
BOLTEK 1
Alarm Event LogsBack
Carrier 100%
Camera 01
XTST-000048-DDAFF
VideoEvent Photo
IP Cam
B
O
LTEK
1
A
larm Event Lo
gs
Back
Carrie
r
1
00
%
C
amera 0
1
XT
S
T-000048-DDAF
F
Vi
deo
Ev
e
n
t
P
h
o
t
o
IP
C
a
m
No Photos
Camera 01 Select
Back
Carrier 100%
C
amera 0
1
Se
l
ect
B
ac
k
C
arrier
1
00
%
BOLTEK 1
Photos
Back
Carrier 100%
Camera 01
XTST-000048-DDAFF
VideoEvent Photo
IP Cam
BOLTEK
1
Ph
o
t
os
B
ack
C
arrie
r
1
00
%
C
amera 0
1
XT
S
T-000048-DDAF
F
Video
E
v
e
n
t
Pho
t
o
IP Ca
m
1970-01-01 2
2015-10-27 1
2015-10-29 57
App
Back
Carrier 100%
1
9
7
0
-
0
1-
01
2
20
15-1
0
-
2
7
1
2
0
1
5
-1
0
-2
9
5
7
App
B
ack
C
arrier 100
%
Camera App
VideoEvent Photo
IP Cam
BOLTEK 1
Videos
Back
Carrier 100%
Camera 01
XTST-000048-DDAFF
C
amera
A
p
p
Video
E
v
e
n
t
Pho
t
o
IP Ca
m
BO
LTEK
1
Vi
deos
B
ac
k
C
arrier
1
00
%
C
amera 01
XT
S
T-000048-DDAFF
Camera:
Video Name:
Date & Time:
Video Size:
XTST-000048-DDAFF
LOD_20151027_135544.avi
2015-10-30 | 1:5:53 pm
509 KB
Camera:
Video Name:
Date & Time:
Video Size:
XTST-000048-DDAFF
LOD_20151027_160330.avi
2015-10-25 | 3:06:04 am
1 MB
Camera:
Video Name:
Date & Time:
Video Size:
XTST-000048-DDAFF
LOD_20151027_155955.avi
2015-10-26 | 4:03:40 am
134 KB
Camera:
Video Name:
Date & Time:
Video Size:
XTST-000048-DDAFF
LOD_20151027_155742.avi
2015-10-27 | 3:37:56 pm
317 KB
Camera:
Video Name:
Date & Time:
Video Size:
XTST-000048-DDAFF
LOD_20151027_155618.avi
2015-10-27 | 3:56:36 pm
323 KB
Camera:
Video Name:
Date & Time:
Video Size:
XTST-000048-DDAFF
LOD_20151027_150542.avi
2015-10-27 | 3:06:04 pm
51 KB
Camera 01 Back
Carrier 100%
Camera
:
Vi
deo
N
a
m
e:
Date & Time
:
Video
S
ize
:
XTST-000048-DDAF
F
LOD_20151027_135544.av
i
2015-10-30
|
1:5:53 pm
5
09
KB
C
amera
:
Video Name
:
D
a
t
e
&
Tim
e:
Video Size
:
XT
S
T-000048-DDAF
F
LOD_20151027_160330.av
i
2015-10-25
|
3:06:04 a
m
1
MB
C
amera
:
Video Name
:
Date & Time
:
Video
S
ize
:
XT
S
T-000048-DDAF
F
L
O
D_20151027_155955.av
i
2015-10-26
|
4:03:40 a
m
1
3
4 K
B
C
amera
:
Video Name
:
D
ate
&
Ti
me
:
Video Size
:
XT
S
T-000048-DDAF
F
L
O
D_20151027_155742.av
i
2015-10-27
|
3:37:56 p
m
3
17
KB
Camera
:
Video Name
:
Date & Time
:
Video
S
ize
:
XTST-000048-DDAF
F
L
O
D_20151027_155618.av
i
2015-10-27
|
3:56:36 p
m
3
23 K
B
C
amera
:
Vid
eo
N
ame
:
D
ate
&
Ti
me
:
Video Size
:
XT
S
T-000048-DDAF
F
L
O
D_20151027_150542.av
i
2015-10-27
|
3:06:04 p
m
5
1 K
B
C
amera 0
1
Back
C
arrie
r
100
%

11
• In ARM Mode, the panel and Zumi will emits a loud and shrill
siren whenever triggered. A two minutes video will
automatically start recording too. You can check it later from
the system memory or choose to take a live view from the
App.
• If any sensor is triggered under Arm state (including ARM
Mode and HOME Mode), Zumi also emits siren and
automatically start recording for two minutes video. You can
check it later from the cloud & SD card or choose to take a
live view from the App.
• In ALERT Mode, the panel will emit a doorbell sound when
triggered.
• The HOME Mode allows you all the enrolled sensors
including Zumi to be in either one of three states: Off,
Alert or Arm.
Part D: Working with the Smart Panel / Remote
12. Arm / Disarm the Smart Panel
After Zumi has been added to the panel, it can be used in all the 3 modes: ARM, ALERT, HOME.
You can arm or disarm the system in 3 ways: from the Smart Panel, the remote control, or the mobile app. The
remote control works within a range of about 100m (unblocked) from the panel. The mobile app will work as
long as your smartphone is connected to the internet and the WiFi network your panel is connected to is
working.
13. Zumi triggered in Arm, Alert and Home Mode
14. Other Sensors Triggered Under ARM mode
OFF
06:30PM
31/12/2016
STATUS:
OFF
06:30PM
31/12/2016
STATUS:
disarm
06:30PM
31/12/2016
STATUS:
ALERT MODE
03 ZUMI1
TRIGGERED
ARM MODE
01 MAGNET1
TRIGGERED
ARM MODE
03 ZUMI1
TRIGGERED
HOME MODE
03 ZUMI1
TRIGGERED

12
Part E: Maintenance and Tips
15. Maintenance of equipment
• The product can be cleaned with a soft dry cloth. Do not use abrasive, solvent based or aerosol cleaners as this may
damage and / or discolor the product.
• Do not allow water to enter or attempt to clean the inside of the unit. If the camera is affected with damp, please use a
soft dry cloth as soon as possible.
• Do not touch the camera lens with your fingers.
• Protect the camera from oil, water, steam, moisture and dust.
• Do not aim the camera lens at the sun.
• Do not attempt to disassemble or repair cameras. If there are any technical problems, please consult the local
distributor.
16. Reset
There could be a few cases you will need to reset the WiFi network connection or set the camera back to the
factory default. Use a stick-like object such as clip, toothpick etc. to push the reset button at the back of Zumi.
•
WiFi reset
Press and hold for about 2 seconds, you will hearing a “Dingdong” sound. The network setting will be erased.
•
Factory reset
Press and hold for about 15 seconds, you will hearing a long “Beep”. The camera is return to the factory default
state.
Part F: Product Specs
Model Number / Product Name
Compatible devices
IPC-135 / Zumi IP-Camera
Camera
iPhone, iPad, iPad mini, and iPod touch and Android devices
Camera angle Horizontal:355° / Vertical:90°
Lens 90° (Wide-Angle)
Resolution 720P / VGA / QVGA
FTP Maximum 30 fps
Operating system iOS 7.0 or above / Android 4.0 or above
Image enhancement Mirror / Brightness / Contrast

13
Part G: Trouble Shooting and Customer Service
17. FAQ
Q: Can I mount the camera up side down? How do I check the monitored screen?
A: Yes. If the monitored scene is upside down or left to right, click the mirror button on the top right corner of
the Live View to adjust the orientation.
Q: Why can't I connect Zumi to the App?
A: First, make sure the hardware has been connected correctly and that Zumi has not been connected to any
network.
The process of adding Zumi to the App includes two steps:
①Connect a network (if using WiFi) to the device.
②Link Zumi to the Smart Panel (From the add sensor mode).
Follow the instructions from the app and trigger the device to add a new sensor.
Q: How to check the network status?
A: There is a network connection status light (on the right side) in the front of the hardware. If there is no
network is disconnected, the network light will keep flashing and the camera will broadcast a network searching
sound. After Zumi has been reconnected, a sound will be emitted and the network light will stop flashing.
Q: How to reset my Zumi?
A: There is a reset button at the back. Use a stick-like something such as clip, toothpick etc. to push it.
Push and hold for 2 seconds to erase the network setting. A “Dingdong” sound will indicate this.
Push and hold for 15 seconds to set the camera back to factory default. A long “Beep” sound will indicate this.
Network
Protocol TCP / IP, HTTP, etc.
Smart Alarm Motion detective / Build-in Siren / Connect to WS-135 smart panel
Triggered Alarm siren / Video record (E-mail / SMS / App notification)
Record Triggered / Manual / Schedule
Interface
Audio Input
General
Audio Output
Built-in Mic
Build-in speaker & Audio Outlet x 1
RF(Radio Frequency) 433.92 Mhz
Data Storage Maximum 32G SD Card / Smart phone / Tablet
Reset Button Yes
Power 6W
Working Environment Temp: 0°C ~ 40°C, Humidity: 45% ~ 85%
Electricity Supply 5V / 2A AC adaptor
Weight 340G
Size 108mm (L) x 110mm (D) x 132mm (H)

14
Q: Can I still use the same equipment if I move and change a WiFi network?
A: The Red Shield SNAP-Console System is completely portable. When you move, you can unmount your
security accessories and re-install them in your new property.
If you change your WiFi network, reset the panel and all the accessories back to factory default and then
reinstall everything as per the new unit installation instructions.
Q: Why can’t I check the video recording from the video page once I receive an app push notification that the
sensor has been triggered?
A: When the camera or any sensor is triggered, Zumi will record a 2-minute video which will be saved in the
local SD Card. This video only can be checked after the recording is finished. You can view the image feed
from the Live View first. The recording will become available 2 minutes later after you’ve refreshed the data.
Q: Why does Zumi go off-line and the App always prompt me to remove the device?
A: Depending on your home WiFi signal status and hardware location, Zumi could lose the network connection
but will automatically try to reconnect. You can ignore the delete device notice and tap on the fresh button at
the IP Cam page.
18. Customer Contact Details
If you have any comments or enquiries please contact us at:
Red Shield Security Ltd.
21/F Fun Tower, 35 Hung To Road
Kwun Tong, Kowloon, Hong Kong
Website: www.redshieldsecurity.com
Email: [email protected]
NOTE:
• Even the most advanced security systems cannot guarantee 100% protection
against burglary or environmental problems. All alarm systems are subject to
possible compromise or failure-to-warn for a variety of reasons.
• Inadequate maintenance is the most common cause of alarm failure; test your
system at least once per week to ensure the sensors and sirens are working
properly.
• There are some limitations due to the transmission power and range The
receivers may be blocked by radio signals operating near the same
frequencies.

*Support Micro SD Card up to 32GB (not included)
Remote access, motion detection
alert & two-way audio
Z MI •IP-Camera
NO
MONTHLY
FEES
e
ct
i
on
Model No. IPC-135
Control and Monitor
with free ‘BOLTEK’App!
Control and Monito
r
w
ith fr
ee
‘
B
O
LTE
K
’
A
pp!
Remotely monitor your home. Features motion
detection alert, infrared vision & two-way audio
Flexible installation either on the floors, walls or
ceilings with pan & tilt function
Powered by DC adaptor (included)
HOME MONITOR & CONTROL
ON SMARTPHONE OR TABLET
Powered by DC adaptor
Powered
by
DC
adaptor
(i
(i
s
,
wa
ll
• A member of Red Shield Sensor Series
• Makes home surveillance simple and easy with BOLTEK mobile app
• With our unique smartphone app, you can remotely monitor and control
your camera from anywhere in the world
• Features motion detection alert, night vision & two-way audio
• Real time alert via e-mail, app push notification and also records on the Micro SD card*
• Professional 720P HD quality video
• Ideal for monitoring with elderly, kids & baby sitters
• Also ideal for surveillance purpose & monitoring the pets
• Flexible installation either on the floors, walls or ceilings with pan & tilt function
• Easy installation with full instructions & installation kit
FEATURE:
Sn
Red Shield
Sn
SENSOR SERIES

Made in China
*Support Micro SD Card up to 32GB (not included)
© 2016 Red Shield Security Limited. All rights reserved. Red Shield logo is the trademark owned by Red Shield Security Limited.
iPhone, iPad and iPod touch are registered trademarks of AppleInc. iPad mini is a trademark of AppleInc. App Store is aservice
mark of AppleInc. Apple and the Applelogo are trademarks of AppleInc., registered in the U.S. and other countries.
Android and Google Play are trademarksof Google Inc.
A product from
www.redshieldsecurity.com
Red Shield
Pan & Tilt
Function
Live View
24 x 7
LIVE
Record to
Micro SD Card*
A True DIY
Camera
Ideal for Monitoring
Elderly, Kids & Pet
Motion Trigger
Alert
Smartphone
App Controlled
Two Way
Communication
Wi-Fi
Connected
HD Video
Recording
720P
Infrared
Night Vision
Push Notification,
Text Messages & Email