Redline No Limits ISA2331 User manual

USER MANUAL
“No Limits”


• Brand Story
• GeneralInformaon
• MovementInstrucons
-Quartz2Handsand3HandsInstrucons
-QuartzMulfunconInstrucons
-QuartzChronographInstrucons
-QuartzGMTInstrucons
• Water Resistance
• AutomacInstruconsandMaintenance
• DeploymentClaspandBuckleInstrucons
• SAPPHITEK™ Crystal Warranty
• 5YearLimitedInternaonalWarranty
03
04
06
06
08
17
24
27
28
30
32
33
Toserveyoubeerpleasevisitwww.redlinewatches.com.


Brand Story
RED LINE WATCHES
Stay out of the comfort zone. Accept nothing less than greatness.
The founders of Red Line – manufacturers of quality watches for more than three decades
– hold true to the belief that watches should symbolize far beyond just hands and pushers.
Ourwatchescaptureanexhilaraonwiththeirdynamicdesignstrengthandprecision
crasmanship.Theyareanextensionofone’sacons–thosewhopusheverylimittothe
extreme.Big,boldstylesandnishesexudespeedandsleekness.Fromthespeedometer
likedialstotheleatherinteriorinspiraon,RedLinewatchesareinuencedbyautoracing
androaringengines.Manufacturedtothehighestofstandards,itismorethantellingme.
RedLineisabrandinmoon,takingyousomewhere.Anywhere.Fast.SpeedisinourDNA.
Itinuencestheracer-inspireddesignandmaterialspainstakinglymanufacturedintoeach
mepiecejustwaingtocrossthenishlinerst.
RED LINE WATCHES
“No Limits”™
03

We congratulate you on receiving your Red Line watch and thank you for your purchase.
General Informaon:
• Itisrecommendedtorinseyourwatchwithfreshwateraercontactwithsaltedwater.
• It is recommended not to use the crown or pushers if the watch is wet and certainly not
while it is immersed in water.
• Water resistant watches should be inspected and serviced once a year.
Helpful Watch Tips:
• A Quartz Watchisbaerypoweredanddoesnotrequirewinding.Eventuallythebaery
will need to be replaced.
• An Automac Watchisamechanicalwatchthatwindsitselfanddoesnotrequireabaery.
When worn daily, the movement of your wrist causes the mainspring to wind progressively,
eliminangtheneedforaddionalwinding.Tostartyourautomac,youcanhandwindit
byrotangthecrownclockwiseanumberofturnswhileinitsnormaloperangposion
(screwdowncrownswillneedtobeunscrewedrst),orbyswingingitsidetosidefor30
seconds.Werecommendhousinganautomacinawatchwinderbox.
04

• A Manual Wind Watchisamechanicalwatchthatdoesnotrequireabaery,butcanonly
bewoundbyhand.Towindit,turnthecrownclockwisewhileitisinitsnormaloperang
posionunlyoufeelresistance.Thistypeofwatchshouldbewounddaily.
• For Automac and Mechanicalwatches,itisstronglyrecommendedtoavoidadjusng
thedate,month,yearoranyotherfunconsbetween9PMto2AM.Also,mostautomac
andmechanicalwatchesshouldnotbewornwhiledoingsportsorgolngacvitydueto
possible shock damage to the mechanisms inside the movements.
Important Things to Know:
• Many Red Line watches are equipped with a screw down crown to help prevent water
inltraon.Forwatcheswithascrewdownmustrstgentlyrotatethecrowncounter-
clockwiseunlitspringsout.Thecrownmustthenbegentlypulledouttotheappropriate
posionformeordateseng.
• Nevercorrectdatebetween9:00PMand1:00AM.
• Itisveryimportantaersengyourwatchthatyougentlypushinandscrewdownthe
crownrmlytoensurewaterresistance.
• Not screwing down the crown will cause water damage and void warranty.
• Toserveyoubeerpleaseregisteryourwatchatwww.redlinewatches.com.
05

Operang Instrucons
Not all movements may be displayed in this booklet. If you do not nd operat-
ing instrucons for your model, please visit www.redlinewatches.com.
Quartz 2 Hands and 3 Hands Instrucons
(ISA2331,Miyota2015,2315,2305orsimilar)
Time Seng For Models without Calendar
• Gentlyunscrewcrowncounter-clockwiseand/orpulloutthecrowntoPosion2.
• Adjustthemebyturningthecrowninthedesireddirecon.
• Gentlypushinand/orscrewdownthecrownclockwisebackintoNormalPosion.
Time Seng For Models without Calendar and Crown
• Toadjustmepushbuonislocatedonthecaseback.
• Pushconnuallyforquicksengandpushstepbysteptoadjusttheminute.
06

Important Note:
It is very important a er
adjus ng the date and
se ng the me on your
watch that you gently
push in and screw down
the crown rmly to
ensure water resistance.
Not doing so will void
warranty.
Time Se ng For Model with Calendar
• Gentlyunscrewcrowncounter-clockwiseand/orpulloutthecrowntoPosion2.
• Turnthecrownunlthepreviewdaysdateappearsinthecalendarframe.
• PulloutthecrowntoPosion3,andadvancethehourandtheminutehandsunlthe
desired date appears.
(Please set me according to AM or PM).
• Adjustthemebyturningthecrowninthedesireddirecon.
• Gentlypushinand/orscrewdownthecrownclockwisebackintoNormalPosion.
Note: For best accuracy when se ng your mepiece. If your watch has three hands, gently pull out the crown
when the second hand points at the 12 o’clock or “00” seconds.
(1=NormalPosion,2=CalendarPosion,3=TimeSengPosion)
07

08
Quartz Mul func on Instruc ons
(Miyota6P09,GP03,JP25,VD74,VX36orsimilar)
Day Se ng
• Gently unscrew crown counter-clockwiseand/orpulloutthecrowntoPosion2.
• Turn the hour/minute hands in a clockwisedirecontosetday.Inordertosettheday,you
must advance the hour hand by 24 hours per day.
Note: If the day is set by turning the crown counterclockwise, there is the possibility the
date will not change over.
• Donotsetthedaybyturningthecrownincounterclockwisedirecon.
• Thedaychangessomewherebetween0:00amand5:30amoralilelater.
Watch Func ons: Hour, Minute
and Second Hands. Counters
Date of the Month, Dual Time
24H, Date and Day of the Week.
and Second Hands. Counters
Date of the Month, Dual Time
24H, Date and Day of the Week.

09
Time Seng
• CrownremainsinPosion2.
• PressPusherAstepbysteptoadjustthedesireddate.Toensuremeissetaccurately,
rstturntheminutehand5minutesaheadofdesiredmeandthenturnback
(inacounterclockwise)tothedesiredme.
• Aersengtheme,useamesignaltosynchronizethewatchbygentlypushingcrown
tothenormalposiontostartthesecondhandgoing.
Note: Make sure you have correctly set AM/PM before seng the me.
Month Seng
• Eachmethemonth-adjustmentbuonispusher(PusherA),themonthadvancesone
monthatame.BesuretopressrmlyonPusherAwhenmakingmonthchanges.
Note: Do not set the month when the date hand is between the 26th and 31st. Move the date hand out of
this period. Aer this operaon, return the date hand to the proper seng. (When the date hand is between
the 26th and 31st, month quick seng cannot be made or if a quick seng is aempted, the month may not
advance to the next month as normal).
The month and date are synchronized such that when adjusng the date at the end of short months (less than
31 days), the month automacally adjusts to the correct month. The month hand begins changing to the next
month around midnight of the 30th day. It completes the change around midnight of the 31st. (On the 31st,
the posion of the month between the current and next month).

Watch Functions: Hour, Minute and Second Hands. Counters 24 Hour, 2nd Time (0 Hour
to24Hours)andDate.
10
Day Se ng
• Gentlyunscrewcrowncounter-clockwiseand/orpulloutthecrowntoPosion1.
• Turn the crown counterclockwise to set the date quickly.
Note: Do not set the date between the hours 9:00pm and 0:30am. The date may not change correctly the
next day.

Time Seng
• Gentlyunscrewcrowncounter-clockwiseand/orpulloutthecrowntoPosion2.
• Turn the crown to set hour and minute hands.
• Gentlypushinand/orscrewdownthecrownclockwisebackintoNormalPosion,second
hand begins to run.
Day Seng
• Gentlyunscrewcrowncounter-clockwiseand/orpulloutthecrowntoPosion1.
• Turn the crown clockwise to set date.
If the date is between the hours of around 9:00pm and 2:00am, the date may not change
on the following day.
• Gentlypushinand/orscrewdownthecrownclockwisebackintoNormalPosion.
2nd Time (24 Hours) Seng
• CrownremainsinPosion1.
• Turnthecrowncounter-clockwisetosetthe2ndne(24Hour).
Gentlypushinand/orscrewdownthecrownclockwisebackintoNormalPosion.
11

Watch Func ons: Hour, Minute and Second Hands. Counters 24 Hour, Dual Time, Day of the
Week and Date.
Day Se ng
• Gently unscrew crown counter-clockwiseand/orpulloutthecrowntoPosion2.
• Turn the crown clockwise to set the day.
• Gentlypushinand/orscrewdownthecrownclockwisebackintoNormalPosion.
The day is changed during the period from 0am to 5am.
12

Date Seng
• Gently unscrew crown counter-clockwiseand/orpulloutthecrowntoPosion1.
• Turn the crown clockwise to set the date.
If the date is set between the hours of around 9:00pm and 1:00am, the date may not
change on the following day.
• Gently push in and/or screw down the crown clockwise backintoNormalPosion.
Time Seng
• Gently unscrew crown counter-clockwiseand/orpulloutthecrowntoPosion2.
• Turn the crown to set hour and minute hands.
• Gently push in and/or screw down the crown clockwisebackintoNormalPosion,second
hand begins to run.
Dual Time Seng
• PressPusherAtosetthedualmehandforwardinunitsof15minutes.
• PressPusherBtosetthedualmehandbackinunitsof15minutes.
The dual me hand can be put rapidly by connuously pressing Pusher A or B.
13

Time, Day & Date Se ng
• Gentlyunscrewcrowncounter-clockwiseand/orpulloutthecrowntoPosion2,thesmall
secondhandisatthe12o’clockposion.Itwillstoponthespotandadvancethehourand
minute hands by turning the crown.
• Setthedaybyrotangthehourandminutehandsclockwise.
(Check that the 24-hour hand is set correctly)
• Gentlypushinand/orscrewdownthecrownclockwisebackintoNormalPosion.Gently
pulloutthecrowntoPosion1.
• Setthedatebyrotangthecrownincounter-clockwisedirecon.
• Gently push in and/or screw down the crown clockwisebackintoNormalPosion.
Do not set the date between 10:00pm and 1:00am. Otherwise, the day may not change
properly. If it is necessary to set the date during that me period, rst change the me to
any me outside it, set the date and then reset the correct me.
Watch Func ons: Hour,
Minute and Second Hands.
Counters 24 Hour, Dual
Time, Day of the Week and
Date.
14
Time, Day & Date Se ng
Minute and Second Hands.
Time, Day of the Week and

Watch Func ons: Hour and Minute Hands. Counters Day of the Week and Date
of the Month.
Time & Day Se ng
• Gently unscrew crown counter-clockwiseand/orpulloutthecrowntoPosion2whenthe
secondhandisatthe12o’clockposion.
• Turnthecrownclockwisetoadvancethehourandminutehandsunlthedayhandisset
to the desired day of the week.
Note: The day hand will move back by turning the crown counter-clockwise.
• TurntosetthemetakingAMorPMintoconsideraon.
• Gently push in and/or screw down the crown clockwisebackintoNormalPosion.
15

Advance Seng Technique
• To advance the day hand quickly, turn back the hour and minute hands 4 to 5 hours beyond
thepointofthedaychange(between11:00pmand4:00am),andthenadvancethemagain
unlthedayhandissettothenext.
Note: The day hand will not move back by turning the crown counter-clockwise.
• Whensengtheminutehand,advanceit4to5minutesaheadofthedesiredmeandthen
turnitbacktotheexactme.
Date Seng
• Gently unscrew crown counter-clockwiseand/orpulloutthecrowntoPosion1.
• Turn the crown counter-clockwise to set date hand.
Note: The date hand will not move back by turning the crown clockwise.
• Gently push in and/or screw down the crown clockwisebackintoNormalPosion.
Advance Seng Technique
• Donotsetthedatehandbetween9:00pmand1:00am.Otherwise,itmaynotturnproperly.
• Whileselingthedatehand,checkthatitmovesproperlyinone-dayincrements.
• Itisnecessarytoadjustthedateontherstdayaera30daymonthandFebruary.
16

Quartz Chronograph Instruc ons
(Miyota0S11,6S20,JS15,VD53,VK64orsimilar)
Time Se ng
• Gently unscrew crown counter-clockwiseand/orpulloutthecrowntoPosion2.
• Turn the crown to set hour and minute hands.
• Gently push in and/or screw down the crown clockwisebackintoNormalPosion,second
hand begins to run.
Date Se ng
• Gently unscrew crown counter-clockwiseand/orpulloutthecrowntoPosion1.
• Turn the crown counter-clockwise to set the date.
If the date is set between the hours of around 9:00pm and 1:00am, the date may not
change on the following day.
• Gentlypushinand/orscrewdownthecrownclockwisebackintoNormalPosion.
Watch Func ons: Hour,
Minute and Chronograph
Hands with exposed date
aperture on dial. Counter
30 Minutes and 60
Seconds.
17
(Miyota0S11,6S20,JS15,VD53,VK64orsimilar)

Using Chronograph
Thischronographisabletomeasureanddisplaymeuptoamaximumof59minutes59
seconds.Thechronograph1/1secondhandkeepsconnuouslyfor59minutes59secondsaer
starng.
Measuring me with the chronograph:
1.ThechronographcanbestartedandstoppedeachmebypressingPusherA.
2. Pressing Pusher B resets the chronograph and the chronograph second hand and chrono-
graphminutehandreturntozeroposion.
Reseng Chronograph
This procedure should be performed when the chronograph second hand does not return to
zeroposionaerthechronographhasbeenreset,andincludingaerthebaeryhasbeen
replaced.
1. Gently unscrew crown counter-clockwiseand/orpulloutthecrowntoPosion2.
2.PressPusherAtosetthechronographsecondhandtothezeroposion.Thechronograph
handcanbeadvancedrapidlybyconnuouslypressingPusherA.
3. Once the hand has been zeroed, gently push in and/or screw down the crown clockwise
backintoNormalPosion.
Do not push crown to Normal Posion while the chronograph second hand returns to
zero posion. It stops on the way when crown has returned to Normal Posion and its
posion is recognized as zero posion.
18
This manual suits for next models
10
Table of contents