
1005
01
(1) Do not use in wet environments (like the bathroom). Clean your skin before
operating.
(2) Turn the power off after operation.
(3) Please disconnect the product from power source if it is not being used for a
long period of time. Clean the lamp head and cover it properly for storage.
(4) Please wipe the lens with soft lens cleaning paper when cleaning the lens. Do
not wipe with cloth and paper of other materials, otherwise the lens may be damaged.
(5) Please avoid direct light projection to the eye.
(6) If the external soft power cable is damaged, it can only be replaced by the
manufacturer, service agent or personnel with similar qualification in order to avoid
hazard.
(7) WARNING “ ” (IEC 60417-6042): The light source can only be replaced
by the manufacturer, service agent or personnel with similar qualification.
(8)Do not use alcohol or other organic solvent to clean the lens.
1. Cautions:
2. Instruction:
This device mainly detects changes in the human skin surface by examining the
various minor changes in the skin surface. Providing further effectiveness when
operating beauty and care treatments.
The magnifying function of the product can also be used for beauty treatments
such as eyebrow and lips tattooing and eyelash grafting, etc.
The magnifying lens can be use independently with the supporting stand or in
combination with other devices.
The device has an innovative design and elegant profile. It has a safety design to
avoid injury by clamping during operation. The magnifying lens employs the
combination of the regular 5-time and partial area 8-time magnification. The
brightness of the lamp is gentle and comfortable to avoid dizziness after use.
3.Technical Specifications:
(1) See the table below for either type of input power: (Further information can be
found on the main unit's label plate)
(2) Rated power and illumination: (illumination tested at a distance of 20cm)
Level 1: 2.5W, 1,000 LUX
Level 2: 6.0W, 2,300 LUX
(3) Working environment: Temperature +0◦C ~ +45◦C, relative humidity 30%~90%
(4) Storage environment:: Temperature -20◦C ~ +60◦C, relative humidity 30%~80%