Adjustment Mode
7
1. If you wear glasses, please wear glasses when using the
equipment.
2. If used during the day, make sure that the infrared light is turned
off (if the infrared light is turned on, the screen is shown in black
and white, and if the infrared light is turned off, the screen is
displayed in color).
3. When used at night or in case of insufficient light, make sure that
the IR is turned on and press the button ( the screen is black
and white when the IR light is turned on) to adjust the most
appropriate brightness according to the actual situation.
4. Adjust the focus by slowly turning the focusing wheel to ensure
that the focus has been focused.
5. Long press or button to zoom in or zoom out the image,
the zoom value will be displayed on the LCD screen.
Poor Image
1. IR-LED Night vision Camera function.
2. Regarding manual focusing: the machine lens is marked "←" and "→ ".
According to the observed target distance, please rotate the lens to the
left/right. The user can repeatedly debug the best focal length according
to the actual observation distance until it is clear on the display screen.
IR-LED Night Vision Camera Function
2. Deleting Stored Videos and Photos: In playback mode, press the
button. You can use the or button to select to
delete/lock the image you are viewing from the micro SD card,
then press to delete/lock the image.
