Remax RB-T1 User manual

BLUETOOTH HEADSET
OPERATING MANUAL
A.Mini USB charging socket B.Earbud
C.Talk Button/LEDIndicator D. Microphone
SPECIFICATION:
Model: RB-T1
Bluetooth Version: 4.0
Operation frequeny: 2402-2480 MHz
Talk time: ≤Up to 5hours
Standby time: ≤100hours
Charge time: 2 hours
Wireless range: 10m
Connection: Support multipoint connection, can connection two sets of equipment at the
same time
Voice quality: HD Audio(16KHZ)
Weight: 5g
ACCESSORIES:
We have supplied you with 3 different size earbuds. Try all the size and pick the one that is
most comfortable and fit for you.
RB-T1 have equipped with 3 ear cap, to fit a new earbud, position the earbud over the
speaker housing and gently press down on the earbud.
CALL INSTRUCTIONS :
A. Power on: In the state of shutdown, press &hold the button for 2 seconds until the white
light is on, “power on”&“Bluetooth connected ”voice prompt will be heard.
B. Standby: White light blinks once every 7 seconds, after 5 min connectionless mode,
RB-T1 will be power off automatically.
C. Power off: Press & Hold Button for 2 seconds, the headset is power off and the red light
go on for 1 second.
D. Answer a call: when incoming call, please just press power button one time.
E. Hang Up a call: Tap Talk button once while on call.
F. Transfer a call: When you are talking, Press & Hold Button for 1 second, release the
button after tone, which can switch between the Headset and mobile phone call
at the moment.
G. Reject a call: Press & Hold Button for 2 seconds, release the button after tone.
H. Redial: while in connect standby mode, press & Hold button for 2seconds, redial last
number. Chinese voice prompt will be heard.
I. Low power prompt: when the Bluetooth is low power, there is "low battery" voice prompt.
J.Language switch: In the state of charging, Press button until the white light flashes twice,
then Voice from the Chinese into English or from English into Chinese.

PAIRING INSTRUCTIONS:
Open smart phone Bluetooth setting, Click “Add” or “Search “Bluetooth devices, select
the "paired device: RB-T1" (if ask for a password, please enter “0000” ),
then you can connect smart phone to Bluetooth Headset, pairing time is 90 seconds, if fail
to pair, 90 seconds later, it will return back to the connectionless state.
PS: In the process of Bluetooth Headset and smart phone Bluetooth pairing, the white light
is in flashing fast state.
B. Pairing two phones
1. Matching with the first mobile phone by paring method 1;
2. Turn off the Bluetooth Headset after paring successfully, keep connecting with the 1st
paired mobile phone.
3. Turn on Bluetooth Headset, press the talk key until the white light flashes quickly.
Bluetooth Headset enter pairing state again.
4. Open the Bluetooth setting of the 2nd device, and connect the Bluetooth headset.
5. Keep the paring mode of the 2nd device, find the Bluetooth headset in the first smart
phone Bluetooth menu,click “connect”, then these two devices will connect the
Bluetooth headset.
ADJUST VOLUME:
Adjust the REMAX RB-T1 Speaker Volume
Press + to increase the speaker’s volume
Press- to decrease the speaker’s volume
OTHER FUNCTIONS:
Under the pairing mode RB-T1 will deactivate the mode if th-ere is no connection in 90
seconds (LED flash red light).
Auto power off: After 5 min connectionless mode, RB-T1 will auto power off.
Power display: Battery capacity on Phone shows up automatically after it is connected with
the IOS system or part of the Android system.
VOICE PROMPT:
RB-T1 is provided with two language voice prompt- Chinese and English, and the default
prompt for English speech. In the charging state, Press & Hold Button until the white light
flashes twice, then can switch the two languages between Chinese and English, the
following table for Chinese /English voice prompts and their implications. The voice prompt
function: default English
CHARGING:
A. Use the included USB cable to connect Bluetooth to PC to charging
B. Use the included USB cable to connect Bluetooth to the matching charger to charging

COMMON PROBLEMS & SOLUTIONS:
A. Can not turn on the Bluetooth Headset: Check whether the Headset is power shortage,
or due to the misoperation, resulting in Headset program error, use charger to recharge it,
then problem will be solved.
B. Cannot search Bluetooth Headset: Check whether the Bluetooth Headset is in normal
state of starting, or smart phone Bluetooth application procedures can be normal used.
C. Noise in the headset: Please confirm whether the audio signal is connected well or not,
RB-T1 and smart phone should be placed on the same side.
D.Headset no sound: Check whether the RB-T1 Bluetooth Headset and mobile phone
connection pairing.If you have Headset connected with Bluetooth pairing, still no sound, you
may refer to the Bluetooth Headset pairing instructions partially repairing connection.
E.Unable to use or the smart phone can't display RB-T1 power: Please confirm that whether
the smart phone supports these functions, refer smart phone specification to
obtain relevant information.
FCC STATEMENT:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.