Nokia BH-219 User manual

© 2010 Nokia. All rights reserved.
Nokia Bluetooth Headset BH-219
Issue 2.0

© 2010 Nokia. All rights reserved.

© 2010 Nokia. All rights reserved.

4
4 © 2010 Nokia. All rights reserved.
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares
that this BH-219 product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC. A
copy of the Declaration of Conformity
can be found at http://www.nokia.com/
phones/declaration_of_conformity/.
© 2010 Nokia. All rights reserved.
Nokia, Nokia Connecting People and the
Nokia Original Accessories logo are
trademarks or registered trademarks of
Nokia Corporation. Nokia tune is a
sound mark of Nokia Corporation. Other
product and company names mentioned
herein may be trademarks or
tradenames of their respective owners.
Reproduction, transfer, distribution, or
storage of part or all of the contents in
this document in any form without the
prior written permission of Nokia is
prohibited. Nokia operates a policy of
continuous development. Nokia reserves
the right to make changes and
improvements to any of the products
described in this document without
prior notice.
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
To the maximum extent permitted by
applicable law, under no circumstances
shall Nokia or any of its licensors be
responsible for any loss of data or
income or any special, incidental,
consequential or indirect damages
howsoever caused.
The contents of this document are
provided "as is". Except as required by
applicable law, no warranties of any
kind, either express or implied,
including, but not limited to, the implied
warranties of merchantability and
fitness for a particular purpose, are
made in relation to the accuracy,
reliability or contents of this document.
Nokia reserves the right to revise this
document or withdraw it at any time
without prior notice.
The availability of products may vary by
region. For more information, contact

© 2010 Nokia. All rights reserved. 5
your Nokia dealer. This device may
contain commodities, technology or
software subject to export laws and
regulations from the US and other
countries. Diversion contrary to law is
prohibited.
Introduction
With the Nokia Bluetooth Headset
BH-219, you can make and answer
calls hands-free with your
compatible mobile device.
Read this user guide carefully
before using the headset. Also,
read the user guide for the device
that you connect to the headset.
The surface of this device is nickel-
free.
This product may contain small
parts. Keep them out of the reach
of small children.
Bluetooth wireless technology
Bluetooth wireless technology
allows you to connect compatible
devices without cables. The
headset and the other device do
not need to be in line of sight, but
they should be within 10 metres
(33 feet) of each other.
Connections may be subject to
interference from obstructions,
such as walls, or other electronic
devices.
The headset is compliant with the
Bluetooth Specification 2.1 + EDR
supporting the Headset Profile 1.1
and Hands-Free Profile 1.5. Check
with the manufacturers of other
devices to determine their
compatibility with this device.

6
6 © 2010 Nokia. All rights reserved.
Get started
The headset contains the
following parts shown on the title
page: multifunction key (1), Near
Field Communication (NFC) area
(2), charger connector (3),
microphone (4), earloop (5),
earpiece (6), and indicator light
(7).
Before using the headset, you
must charge the battery and pair
the headset with a compatible
device.
Parts of the device are magnetic.
Metallic materials may be attracted
to the device. Do not place credit
cards or other magnetic storage
media near the device, because
information stored on them may be
erased.
Charge the battery
Before charging the battery,
carefully read “Battery and
charger information”.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to
the charger connector (8). The
red indicator light is displayed
during charging.
Charging the battery fully may
take up to 2 hours.
3. When the battery is fully
charged, the green indicator
light is displayed. Disconnect
the charger from the headset,
then from the wall outlet.
When you unplug a charger,
hold and pull the plug, not the
cord.

© 2010 Nokia. All rights reserved. 7
The fully charged battery has
power for up to 6 hours of talk
time or up to 100 hours of standby
time.
To check the battery charge when
the headset is not connected to a
charger, press the multifunction
key when the headset is connected
to a mobile device. If the indicator
light is green, the charge level is
sufficient. If the light is yellow,
you may need to recharge the
battery soon. If the light is red,
recharge the battery.
When the battery charge is low,
the headset beeps every 5 minutes
and the red indicator light flashes.
Switch the headset on
To switch on, press the
multifunction key. If your device
supports the Near Field
Communication (NFC) feature,
make sure the feature is activated
in the device, and touch the NFC
area of the device with the NFC
area of the headset. For details on
NFC, see the user guide of your
device.
The headset beeps, and the green
indicator light flashes slowly while
the headset tries to connect to one
or two last connected devices.
When the headset is connected to
at least one device and is ready for
use, the blue indicator light
flashes slowly.
If the headset has not been paired
with a device, it automatically
enters pairing mode.
Switch the headset off
To switch off, press and hold the
multifunction key for about 5
seconds.
The headset beeps, and the red
indicator light is briefly displayed.

8
8 © 2010 Nokia. All rights reserved.
If the headset is not connected to
a device within about 30 minutes,
it switches off automatically.
Pair and connect the headset
Before using the headset, you
must pair and connect it to a
compatible device.
You can pair the headset with up
to eight devices, but you can
connect it to a maximum of two
devices at a time.
To pair and connect the headset to
your device if the device supports
NFC, make sure the headset is off
and NFC is activated in the device,
and touch the NFC area of the
device with the NFC area of the
headset.
To pair and connect the headset to
your device if the device does not
support NFC:
1. Make sure your mobile device is
switched on and the headset is
off.
2. If the headset has not been
previously paired with a device,
switch on the headset. The
headset enters pairing mode,
and the blue indicator light
starts to flash quickly.
If the headset has been
previously paired with a device,
make sure the headset is
switched off, and press and
hold the multifunction key for
about 5 seconds until the blue
indicator light starts to flash
quickly.
3. Within about 3 minutes,
activate Bluetooth on your
device, and set it to search for
Bluetooth devices. For details,
see the user guide of your
mobile device.

© 2010 Nokia. All rights reserved. 9
4. Select the headset from the list
of found devices.
5. If necessary, enter the passcode
0000 to pair and connect the
headset to your device.
In some devices, you may need
to make the connection
separately after pairing.
When the headset is connected to
at least one device and is ready for
use, the blue indicator light
flashes slowly.
To manually connect the last used
device, press and hold the
multifunction key for about 2
seconds (when no other device is
connected), or make the
connection in the Bluetooth menu
of the device.
To manually connect or disconnect
your device if it supports NFC,
touch the NFC area of the device
with the NFC area of the headset.
You may be able to set your device
so that the headset connects to it
automatically. To activate this
feature in a Nokia device, modify
the paired device settings in the
Bluetooth menu.
Basic use
Change the earpad
The headset may be provided with
different sized earpads. Select the
earpad that fits the best and is the
most comfortable for your ear.
To change the earpad, pull the
current earpad from the earpiece,

10
10 © 2010 Nokia. All rights reserved.
and push the new earpad into
place (9).
Place the headset on the ear
To use the headset with the
earloop, attach the earloop to it
(11). To detach the earloop, gently
pull it from the headset.
You can rotate the earpad to keep
the headset securely in the ear
(10). For example, if you use the
headset on the right ear, you may
need to rotate the earpad to the
right for the best fit. If you wear an
earring, make sure it is not
accidentally attached to the
earpad.
To place the headset on the ear,
slide the earloop behind your ear
(12), and gently push the earpiece
against your ear. Point the headset
towards your mouth (13).
Adjust volume
The headset automatically adjusts
the volume according to ambient
noise. To manually adjust the
volume, use the volume controls of
the connected device.
The selected volume level is saved
for the device that is currently
connected to the headset.
Calls
To make a call, use your mobile
device in the normal way when the
headset is connected to it.
To redial the number you last
called (if your mobile device
supports this feature with the
headset), when no call is in
progress, press the multifunction
key twice.
To activate voice dialling (if your
mobile device supports this
feature with the headset), when

© 2010 Nokia. All rights reserved. 11
no call is in progress, press and
hold the multifunction key for
about 2 seconds. Proceed as
described in the user guide of the
mobile device.
To answer or end a call, press the
multifunction key (14). To reject a
call, press the multifunction key
twice.
To switch a call between the
headset and a compatible
connected device, press and hold
the multifunction key for about 2
seconds.
Connect to two devices
The headset can be connected to
two devices at the same time.
Pair and connect to two devices
To pair the headset with two
devices, switch on the headset,
activate pairing mode, and pair it
with the first device. Switch off
the headset, activate pairing
mode, and pair it with the second
device.
To connect the headset to the two
devices, switch the headset off
and back on.
Handle calls
If the headset can connect to two
devices at the same time and you
use redialling or voice dialling, the
call is made on the device that you
last used to make a call when the
headset was connected to it.
To answer a call on one connected
device and end the active call on
the other device, press the
multifunction key.
To answer a call on one connected
device and put the active call on
hold on the other device, press and
hold the multifunction key for
about 2 seconds.

12
12 © 2010 Nokia. All rights reserved.
To end the active call on one
connected device and make the
call on hold active on the other
device, press the multifunction
key.
To switch between the active call
on one device and the call on hold
on the other device, press and hold
the multifunction key for about 2
seconds.
Clear pairings
To clear the pairings from the
headset, switch off the headset,
and press and hold the
multifunction key for about 8
seconds. The headset beeps twice,
the red and green indicator lights
alternate, and the headset enters
pairing mode.
Troubleshooting
If you cannot connect the headset
to your compatible device, check
that the headset is charged,
switched on, and paired with the
device.
Battery and charger information
This device has an internal,
nonremovable, rechargeable battery.
Do not attempt to remove the battery
from the device as you may damage
the device. This device is intended for
use when supplied with power from
the following chargers: AC-3, AC-4,
AC-5, AC-8, DC-4 and DC-9. The
exact charger model number may
vary depending on the type of plug.
The plug variant is identified by one
of the following: E, X, AR, U, A, C, K,
or B. The battery can be charged and

© 2010 Nokia. All rights reserved. 13
discharged hundreds of times, but it
will eventually wear out.
Talk and standby times are estimates
only. Actual times are affected by, for
example, device settings, features
being used, battery condition, and
temperature.
If the battery has not been used for a
long time, to begin charging, you
may need to connect the charger,
then disconnect and reconnect it.
If the battery is completely
discharged, it may take several
minutes before the charging
indicator is displayed.
When your charger is not in use,
unplug it from the electrical plug and
the device. Do not leave a fully
charged battery connected to a
charger, as overcharging may shorten
the battery's lifetime. If left unused, a
fully charged battery will lose its
charge over time.
Always keep the battery between
15°C and 25°C (59°F and 77°F).
Extreme temperatures reduce the
capacity and lifetime of the battery.
A device with a hot or cold battery
may not work temporarily.
Do not dispose of batteries in a fire as
they may explode. Dispose of
batteries according to local
regulations. Recycle when possible.
Do not dispose as household waste.
Use the charger for its intended
purpose only. Improper use or use of
unapproved chargers may present a
risk of fire, explosion, or other hazard,
and may invalidate any approval or
warranty. If you believe the charger is
damaged, take it to a service centre
for inspection before continuing to
use it. Never use a damaged charger.
Only use the charger indoors.

14
14 © 2010 Nokia. All rights reserved.
Take care of your device
Handle your device, charger and
accessories with care. The following
suggestions help you protect your
warranty coverage.
• Keep the device dry. Precipitation,
humidity, and all types of liquids
or moisture can contain minerals
that corrode electronic circuits. If
your device gets wet, allow it to
dry completely.
• Do not use or store the device in
dusty or dirty areas. Moving parts
and electronic components can
be damaged.
• Do not store the device in high
temperatures. High temperatures
can shorten the life of the device,
damage the battery, and warp or
melt plastics.
• Do not store the device in cold
temperatures. When the device
warms to its normal temperature,
moisture can form inside the
device and damage electronic
circuits.
• Do not attempt to open the
device.
• Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and
mechanics.
• Only use a soft, clean, dry cloth to
clean the surface of the device.
• Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
Recycle
Always return your used electronic
products, batteries, and packaging
materials to dedicated collection
points. This way you help prevent
uncontrolled waste disposal and
promote the recycling of materials.
Check product environmental

© 2010 Nokia. All rights reserved. 15
information and how to recycle your
Nokia products at www.nokia.com/
werecycle, or with a mobile device,
www.nokia.mobi/werecycle.
The crossed-out wheeled-
bin symbol on your product,
battery, literature, or
packaging reminds you that
all electrical and electronic
products, batteries, and
accumulators must be taken
to separate collection at the
end of their working life.
This requirement applies in
the European Union. Do not
dispose of these products as
unsorted municipal waste.
For more information on the
environmental attributes of
your device, see
www.nokia.com/
ecodeclaration.