Restomod Air Quantum User manual

QUANTUM ROUND
BULKHEAD
INSTRUCTIONS FOR
©2017 RestomodAir / 05.17

Bag kit model specific
Page 3 866.784.4278www.restomodair.com
G.M.
CAMARO, CHEVELLE,
FIREBIRD, NOVA, C-10
Bolts
1/4 - 20 x 1”
(4)
Nuts
1/4 - 20
(4)
Big Ass Bulkhead
(Model Specific)

mounting bulkhead model specific
Page 3 866.784.4278www.restomodair.com
Tape Template “A” to firewall
The installation procedure for your Quantum
Round Bulkhead for model specific is simple and
straight-forward...
Determine a mounting location for the Bulkhead
on your vehicle. Using the included template “A” at
the back of this manual carefully mark and drill
four holes.
After drilling any holes, carefully
deburr them to eliminate any
potential snags.
Restomod Air logo should be facing up
2.6”
4.6”
Heater Only Firewall
Heater Only Firewall
Restomod Air logo should be facing up
2.6”
4.6”

mounting bulkhead model specific
Page 4 866.784.4278www.restomodair.com
Tape Template “A” to firewall
The installation procedure for your Restomod
Bulkhead is simple and straight-forward...
Determine a mounting location for the billet plate
on your vehicle. Using the included template “A” at
the back of this manual carefully mark and drill
four holes.
After drilling any holes, carefully
deburr them to eliminate any
potential snags.
Restomod Air logo should be facing up
2.6”
4.6”
Factory Air Firewall
Factory Air Firewall
Restomod Air logo should be facing up
2.6”
4.6”

mounting bulkhead model specific
Page 3 866.784.4278www.restomodair.com
Now attach the (4) 1/4 -20 x 1” bolts through the bulkhead and the (4) 1/4 -20 nuts from the
back of the firewall.

mounting bulkhead model specific
Page 4 866.784.4278www.restomodair.com
Reminder... Use two wrenches to
tighten o-ring fittings and a few
drops of mineral oil on the rings also).
Now attach hose fittings.

Bag kit Smooth Firewall
Page 3 866.784.4278www.restomodair.com
Quantum Round Bulkhead
(Smooth Firewall)
Nuts
(4)
Fitting
(4)

mounting bulkhead smooth fiewall
Page 5 866.784.4278www.restomodair.com
The installation procedure for your Quantum
Round Bulkhead for smooth firewall is simple and
straight-forward...
Determine a mounting location for the Bulkhead
on your vehicle. Using the included template “B” at
the back of this manual carefully mark and drill
four holes marked on the template.
After drilling any holes, carefully
deburr them to eliminate any
potential snags.
Smooth Firewall
Smooth Firewall
Tape Template “B” to firewall
Tape Template “B” to firewall

mounting bulkhead smooth firewall
Page 3 866.784.4278www.restomodair.com
Insert the air conditioning fittings through the bulkhead plate from the front, secure them from
the inside with the included fitting nuts.