REV VEN501 User manual

wireless hd set-top box
- 
wireless access point (ap)
MODEL VEN501
1Connect Power to the AP. Connect Ethernet from the AP to the RG.
2Check the back of the AP.
There will be a toggle switch (CL-AP) Make sure it is on AP.
3Connect Wireless STB to power & wait until a prompt appears asking you to connect.
4Press OK on the Wireless STB.
5Go to the AP, press and hold the WPS button for 2 seconds the release to
activate the WPS process.
6The WPS Button will blink Orange.
7A gear icon will appear indicating the connection sequence is in progress.
8When three horizontal dots appear, the connection has been successful.
9On the front pane of the Wireless STB two or more LEDs on the Signal Strength
indicator will light green.

pace 5268ac
RG
1Connect Wireless STB to power & wait until a prompt appears asking you to connect.
2Press OK on the wireless set-top box.
3Go to the RG, press and release the WPS button 3 times to activate the WPS process.
4The light next to WPS will blink GREEN.
5A gear icon will appear indicating the connection sequence is in progress.
6When three horizontal dots appear, the connection has been successful.
7On the front pane of the wireless set-top box, two or more LEDs on the signal
strength indicator will light-up GREEN.
TOLL FREE
(866) 881-4REV
     - & 
v01.2022