Revolve LED KWPF Series User manual

KWPF SERIES FULL CUTOFF WALL PACK
Installation Guide
WARNING
— To prevent personal injury or product damage only licensed electricians should install.
— To avoid electric shock or component damage disconnect power before attempting installation or servicing.
— This product must be installed in accordance with the national electric code (NEC) and all applicable federal, state and local electric codes and safety standards.
— Disconnect product and allow cooling prior to servicing.
— Any alteration or modification of this product is expressly forbidden as it may cause serious personal injury, death, property damage and/or product malfunction.
— To prevent product malfunction and/or electrical shock this product must be properly grounded.
— This luminaire is designed to operate in ambient temperatures ranging from -40°c to 45°c and to be horizontally mounted with the LEDs facing down.
— Wall mount only.
— This product is not available for several special environments, such as places with corrosive gas liquids or high pressure water vapor.
PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION
1. Junction box Mounting
Toll Free: 877-718-0808 | Web: www.revolveled.com | E-mail: [email protected]
+-
+-

Toll Free: 877-718-0808 | Web: www.revolveled.com | E-mail: [email protected]
The fixture is non-dimmable, please follow below diagram
for wiring: