RGB Spectrum QuadView UHDx User manual

RGB Spectrum
950 Marina Village Parkway
Alameda, CA 94501
December, 2019
R
GBSPECTRU
M
4K Multiviewer
QuadView UHDx
QuadView UHDx KVM
User Guide

RGB
ii QuadView UHDx User Guide 350-12245-01 – updated December, 2019
DOCUMENT
QuadView UHDx/UHDx KVM User Guide
350-12245-01
December, 2019
This document describes the features and functions of the following products and software
versions:
QuadView UHDx firmware: 1.0.0.V_8143d8
QuadView UHDx Web Controller: 1.0.0.T_fa21a3
QuadView UHDx KVM firmware: 1.0.0.V_8143d8
QuadView UHDx KVM Web Controller: 1.0.0.T_fa21a3
QuadView UHDx KM version: 1.2.0.D_aef3dc
COPYRIGHT
© 2015-2019 RGB Spectrum, Inc. All rights reserved.
This guide is for use with the RGB Spectrum QuadView UHDx and QuadView UHDx KVM. Use for
any other purpose is not permitted. This guide was prepared for viewing on a PC; a copy may be
printed as required.
QuadView is a registered trademark of RGB Spectrum, Inc.
The RGB logo is a trademark of RGB Spectrum in the United States and other countries.
NOTICE
RGB Spectrum reserves the right to make any modifications to this guide and to the information
contained herein at any time without notice.
All features, functions, and specifications are subject to change without notice or obligation.
Windows is a registered trademark of the Microsoft group of companies.
MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC.

350-12245-01 – updated December, 2019 QuadView UHDx User Guide iii
RGB
LIMITED WARRANTY
RGB Spectrum (RGB) warrants that this product will be free from defects in material and
workmanship, under normal use and service, and when correctly installed and maintained, for a
period of one (1) year from date of shipment. RGB’s liability under this warranty is limited solely to
replacing, repairing or issuing credit for any product which is shown to be defective during the
warranty period.
Purchaser shall: (i) notify RGB Spectrum promptly in writing of any claims, and (ii) provide RGB
Spectrum with an opportunity to inspect and test the product claimed to be defective.
Warranty does not cover misuse, abuse, improper installation or application, improper
maintenance or repair, alteration, accident or negligent use, improper temperature, humidity or
other environmental condition during storage, transportation or handling. RGB Spectrum shall
have no obligations under this warranty with respect to any defect unless it receives notice and a
description of such defect no later than five (5) business days following the expiration of the
warranty period.
THE WARRANTIES STATED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING (BUT NOT LIMITED TO) ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL RGB SPECTRUM BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR LOSS, DAMAGE OR EXPENSE DIRECTLY OR
INDIRECTLY ARISING FROM THE PURCHASER’S INABILITY TO USE THE PRODUCT
EITHER SEPARATELY OR IN COMBINATION WITH ANY OTHER EQUIPMENT OR FACILITIES,
OR FROM ANY OTHER CAUSE.
EXTENDED WARRANTY
An annual extended warranty may be purchased from RGB Spectrum. Should the product fail to
operate properly during the covered period, RGB Spectrum will repair the product and restore it to
normal operation without charge for labor and parts. For further information on obtaining an
extended warranty, email [e-mail] or call [phone].
IMPORTANT SAFETY INSTRUCTIONS
Thank you for your purchase of this quality RGB Spectrum product! To reduct the risk of fire,
electric shock or product damage, please note the following:
Read these instructions.
Keep these instructions.
Heed all warnings.
Install and use this apparatus in accordance with the manufacturer’s instructions.

RGB
iv QuadView UHDx User Guide 350-12245-01 – updated December, 2019
Do not expose this apparatus to rain or moisture. Do not place liquid-filled objects, such as
vases, on the apparatus.
Do not block any of the ventilation openings.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not place any sources of open flames, such as candles, on the apparatus.
Clean only with a dry cloth.
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. When the
provided plug does not fit into your outlet, consult an electrician for the replacement of the
obsolete outlet.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
Only use the attachments/accessories specified by the manufacturer.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Keep the packing material in case the equipment should ever need to be shipped.
REGULATORY COMPLIANCE
RGB Spectrum products have been tested by a nationally recognized testing laboratory and found
to be compliant with the following domestic and international standards. A Declaration of
Conformity is available by request. Please contact RGB Spectrum for more information.
North America
Safety: UL 62368-1/CSA C22.2 No. 62368-1, 2nd Edition 2014
Electro-Magnetic Interference/Electro-Magnetic Compatibility (EMI/EMC):
FCC CFR47, Part 15, Subpart B, CLASS 1; ANSI C63.4:2014
Industry Canada ICES-003 Issue 6, January 2016
European Union
EMI/EMC (Electro-Magnetic Compatibility Directive 2014/30/EU): EN 55032:2015, EN
61000-3-2:2014, EN 61000-3-3:2013, EN 55024:2010+A1:2015, EN 61000-4-2, EN 61000-4-
3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
Safety (Low Voltage Directive 2014/35/EU): EN 62368-1:2014
Worldwide (Except for European Union) Safety: IEC 62368-1:2014

RGB
TABLE OF
CONTENTS
350-12245-01– updated December, 2019 QuadView UHDx/UHDx KVM User Guide v
Chapter 1 INTRODUCTION - - - - - - - - - - - - - - - - - - - - - - - - - - 1
1.1 Features and Benefits .......................................................... 2
1.1.1 System Features ................................................. 2
1.1.2 Inputs ................................................................... 2
1.1.3 Control ................................................................. 3
1.2 System Control .................................................................... 3
1.3 Controls, Indicators, and Connectors .................................. 4
1.3.1 Front Panel Controls and Indicators .................... 4
1.3.2 Rear Panel Controls and Indicators (Standard) ... 5
1.3.3 Rear Panel Controls and Indicators (KVM) ......... 6
1.4 Specifications ....................................................................... 7
Chapter 2 INSTALLATION - - - - - - - - - - - - - - - - - - - - - - - - - 11
2.1 QuadView UHDx Connections ........................................... 11
2.1.1 Connecting Sources .......................................... 11
2.1.2 Connecting a Display ......................................... 12
2.1.3 Connecting Audio Equipment ............................ 12
2.1.4 Connecting to a Network ................................... 12
2.1.5 Connecting a Control PC or Control System ..... 13
2.2 KVM Connections (QuadView UHDx KVM Only) .............. 13
2.3 Powering on the QuadView UHDx ..................................... 14
Chapter 3 Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
3.1 Standby and Normal Modes .............................................. 15
3.2 Screen Layouts .................................................................. 16
3.3 Front Panel Controls .......................................................... 17
3.3.1 Single-Window Mode ......................................... 17
3.3.2 Dual-Window Mode ........................................... 18
3.3.3 Triple-Window Mode .......................................... 18
3.3.4 Quad-Window Mode .......................................... 18
3.4 Audio Inputs ....................................................................... 19
3.5 On-Screen Display (OSD) Messages ................................ 19
3.5.1 Video Input Status and Network Settings .......... 19
3.5.2 Audio Status ...................................................... 20

RGB
vi QuadView UHDx/UHDx KVM User Guide 350-12245-01 – updated December, 2019
3.6 Locking & Unlocking the Front Panel Buttons ................... 20
3.7 Using the QuadView UHDx Web Controller ...................... 20
3.8 The General Tab ................................................................ 22
3.8.1 Video Settings ................................................... 22
3.8.2 Crop Input Settings ............................................ 24
3.8.3 Audio Settings ................................................... 25
3.9 The Layouts Tab ................................................................ 26
3.9.1 Layout Customization ........................................ 26
3.9.2 Layout Recall ..................................................... 28
3.10 The EDID Management Tab .............................................. 29
3.10.1 EDID Copy ......................................................... 29
3.10.2 EDID Upload ...................................................... 30
3.10.3 EDID Download ................................................. 31
3.11 The Network Tab ............................................................... 33
3.11.1 Network Settings ............................................... 33
DHCP ................................................................ 33
STATIC .............................................................. 34
3.11.2 Socket Settings .................................................. 34
3.12 The Advanced Tab ............................................................ 34
3.12.1 Power Settings .................................................. 35
3.12.2 Auto Layout ....................................................... 36
3.12.3 Audio Settings ................................................... 36
3.12.4 OSD Control Settings ........................................ 37
Video OSD ......................................................... 37
Audio OSD ......................................................... 37
OSD Transparency ............................................ 37
3.12.5 Input Label Settings ........................................... 37
3.12.6 Serial Port Settings ............................................ 38
3.12.7 Authentication Settings ...................................... 39
3.12.8 Other Settings .................................................... 39
3.13 (sing the KVM Function (QuadView UHDx KVM Only) ...... 40
Chapter 4 Command Line Control - - - - - - - - - - - - - - - - - - - 41
4.1 Connecting to the QuadView UHDx via Telnet/IP ............. 41
4.2 Connecting to the QuadView UHDx via Serial Link ........... 42
4.3 Command Syntax and Lists ............................................... 43
4.3.1 General Commands .......................................... 43
4.3.2 Layout Commands ............................................ 48
4.3.3 EDID Commands ............................................... 49
4.3.4 Network Commands .......................................... 50
4.3.5 Advanced Commands ....................................... 51
4.4 Configuration Change Notifications ................................... 54
Chapter 5 Firmware Updates - - - - - - - - - - - - - - - - - - - - - - - 55
5.2 Command Line .................................................................. 56
5.1 Web Controller ................................................................... 56
5.3 Front Panel ........................................................................ 57
5.4 Completing the Update ...................................................... 57

350-12245-01– updated December, 2019 QuadView UHDx/UHDx KVM User Guide vii
RGB
Chapter 6 CONTACT INFORMATION - - - - - - - - - - - - - - - - - 59
6.1 Corporate Headquarters .................................................... 59
6.2 Sales and Product Information .......................................... 59
6.3 Technical Support .............................................................. 59

RGB
viii QuadView UHDx/UHDx KVM User Guide 350-12245-01 – updated December, 2019
This page intentionally left blank.

350-12245-01 – updated December, 2019 QuadView UHDx/UHDx KVM User Guide ix
RGB
LIST OF
FIGURES
Figure 1-1 front Panel Controls and Indicators ......................................................... 4
Figure 1-2 Rear Panel Connectors (Standard) ......................................................... 5
Figure 1-3 Rear Panel Connectors (KVM) ................................................................ 6
Figure 1-4 Overall Dimensions ................................................................................. 9
Figure 2-1 Audio Outputs ....................................................................................... 12
Figure 2-2 Connecting to a Network ....................................................................... 12
Figure 2-3 RS-232 Controller Connection .............................................................. 13
Figure 2-4 KVM Connections ................................................................................. 13
Figure 3-1 Predefined Screen Layouts ................................................................... 16
Figure 3-2 Default Source-to-Window Routing ....................................................... 17
Figure 3-3 OSD Messages – Video Input Status .................................................... 19
Figure 3-4 OSD Messages – Network Settings ...................................................... 20
Figure 3-5 Login Screen ......................................................................................... 21
Figure 3-6 General > Video Settings ...................................................................... 22
Figure 3-7 General > Crop Input Settings ............................................................... 24
Figure 3-8 General > Audio Settings ...................................................................... 25
Figure 3-9 Layouts > Layout Customization Settings ............................................. 26
Figure 3-10 Layouts > Layout Recall ........................................................................ 28
Figure 3-11 Copying EDID ....................................................................................... 29
Figure 3-12 EDID Copy ............................................................................................ 30
Figure 3-13 EDID Upload ......................................................................................... 31
Figure 3-14 EDID Download ..................................................................................... 32
Figure 3-15 Network Tab .......................................................................................... 33
Figure 3-16 Advanced Tab - Top Half ..................................................................... 35
Figure 3-17 Advanced Tab – Lower Half ................................................................. 38
Figure 5-1 Update Settings ..................................................................................... 56

RGB
x QuadView UHDx/UHDx KVM User Guide 350-12245-01 – updated December, 2019
This page intentionally left blank.

350-12245-01 – updated December, 2019 QuadView UHDx/UHDx KVM User Guide xi
RGB
LIST OF
TABLES
Table 1-1 QuadView UHDx front Panel Controls and Indicators ............................. 4
Table 1-2 QuadView UHDx Rear Panel Controls and Indicators (Standard) .......... 5
Table 1-3 QuadView UHDx KVM Rear Panel Controls and Indicators ................... 6
Table 1-4 QuadView UHDx and QuadView UHDx KVM Specifications .................. 7
Table 2-1 KVM Connections ................................................................................. 14
Table 4-1 General Commands .............................................................................. 43
Table 4-2 Layout Commands ................................................................................ 48
Table 4-3 EDID Commands .................................................................................. 49
Table 4-4 Network Commands .............................................................................. 50
Table 4-5 Advanced Commands ........................................................................... 51

RGB
xii QuadView UHDx/UHDx KVM User Guide 350-12245-01 – updated December, 2019
This page intentionally left blank.

350-12245-01 – updated December, 2019 QuadView UHDx/UHDx KVM User Guide 1
C H A P T E R 1
I n t r o d u c t i o n
RGB
The feature-rich RGB Spectrum QuadView UHDx family internally switches up to six input signals
and can display up to four of them simultaneously on a single screen with superior image quality at
up to 4K@60Hz resolution with customizable display windows.
The QuadView UHDx connects to any monitor or projector of any resolution from XGA
(1,024x768) to 4K/UHD resolution. You can mix and match input resolutions, scale any video input
up to 4K UHD, and route any input to any window. The QuadView UHDx displays both HD and 4K
UHD inputs without downscaling. Analog and digital audio sources are also supported from any
source. The QuadView UHDx KVM also allows you to connect multiple PCs to the and control
them using a keyboard and mouse.
CHAPTER
1INTRODUCTION
N o t e All references to QuadView UHDx in this manual also apply to the QuadView UHDx KVM
unless otherwise noted.
VIDEO
2
4
PWR
123456
INPUTS AUDIO
LAYOUT
1
3
QuadView UHDx
LOCK

RGB
C H A P T E R 1
I n t r o d u c t i o n
2 QuadView UHDx/UHDx KVM User Guide 350-12245-01 – updated December, 2019
Control options include the front panel, a built-in web interface, and third-party control via both
Telnet and RS-232. The simple front panel controls make selecting audio, video input, and display
layout fast and easy. Just select a customizable layout, select inputs, and route inputs to the
desired display windows.
The versatile QuadView UHDx delivers next-generation multi-viewer performance that allows
users to fully leverage the benefits of 4K UHD resolution displays. It is an ideal solution for
boardrooms, entertainment and sports venues, lobbies, control rooms, and command centers.
The Auto Layout feature facilitates BYOD for conference rooms, boardrooms, huddle rooms, and
any location where devices come & go. Enabling this feature lets you simply plug your source(s)
into the HDMI port(s), and the QuadView UHDx will automatically and dynamically select a window
layout based on the number of connected HDMI source(s).
The QuadView UHDx supports High-definition Digital Content Protection (HDCP 2.2 and HDCP
1.4) to allow the display of protected content.
The QuadView UHDx provides these key features and functions:
1.1.1 System Features
Displays up to four (4) windows simultaneously from up to six (6) switchable sources.
Provides 16 customizable display layouts and 16 preset display layouts.
Allows window scaling to full-window, 4:3, or 16:9 aspect ratios, or native aspect ratio display.
Supports multiple HDMI output resolutions up to 3840 × 2160 @60Hz.
Supports 7.1-channel audio.
Provides optical fiber and stereo analog audio output.
Supports multiple-channel audio extraction from HDMI or DisplayPort sources.
Supports Mobile High-Definition Link (MHL™) on the four HDMI input ports.
Provides a USB port for on-site firmware updates.
Standard, 1 RU/19-inch width, rack-mountable enclosure.
Provides cropping of input sources.
QuadView UHDx KVM only: Built-in KVM function allows you to use a keyboard and mouse
to control multiple PCs connected to the QuadView UHDx KVM.
1.1.2 Inputs
4 × HDMI.
2 × DisplayPort.
Supports input resolutions up to 3840 × 2160 @60Hz.
1.1 Features and Benefits

350-12245-01 – updated December, 2019 QuadView UHDx/UHDx KVM User Guide 3
C H A P T E R 1
I n t r o d u c t i o n
RGB
Scales input signals for output to a UHD or Full HD display.
Automatically scales source inputs to destination windows.
Provides fast input switching.
1.1.3 Control
Easy-to-use front panel controls.
QuadView UHDx Web Controller, a simple and intuitive web-based interface.
Command-line interface (CLI) via RS-232 serial or Telnet connection.
Support for third-party control systems.
The RS-232 serial port and Ethernet port provide system control for the QuadView UHDx.
The RS-232 serial port connects to:
An ASCII terminal.
Any computer with a serial port.
A third-party control system.
Commands are sent from the terminal or computer to the QuadView UHDx.
The Ethernet port allows you to connect the QuadView UHDx to either:
A network.
Directly to a PC.
This connection allows you control the system using either a Telnet command-line session or
the QuadView UHDx Web Controller.
1.2 System Control
N o t e USB-to-serial converters are inexpensive and widely available. If needed, use one to
connect your USB-equipped computer to the QuadView UHDx serial port.
N o t e Refer to “Command Line Control” on page 41, for detailed instructions for setting
up and using the command-line interface.

RGB
C H A P T E R 1
I n t r o d u c t i o n
4 QuadView UHDx/UHDx KVM User Guide 350-12245-01 – updated December, 2019
This section describes the QuadView UHDx and QuadView UHDx KVM front and rear panel
controls and indicators.
1.3.1 Front Panel Controls and Indicators
Figure 1-1 shows the QuadView UHDx and QuadView UHDx KVM front panel controls and
indicators, and Table 1-1 describes them.
Figure 1-1 front Panel Controls and Indicators
1.3 Controls, Indicators, and Connectors
Table 1-1 QuadView UHDx front Panel Controls and Indicators
ID Name Description
1Input/Layout Selection Buttons and
Indicators.
Press one of these buttons to select a video input, audio
input, or one of Layouts #1 through #6.
The pressed button lights to indicate your input selection.
The other buttons flash to indicate available selections.
2Audio (input select mode) Button and
Indicator.
Press this button to choose an input selection mode:
Audio: Indicator ON.
Video: Indicator OFF.
3Layout Selection Button and
Indicator.
Press this button to load a layout.
4Video (window) Selection Buttons
and Indicators.
Press a button to select a window. The button you press
lights to indicate your window selection.
5Lock Button and Indicator. Press this button to select either lock (indicator ON) or
unlock (indicator OFF) all front panel buttons.
6Standby Button and Indicator. Press this button to select either standby mode (indicator
OFF) or normal operating mode (indicator ON).
7Power Indicator LED. Lights to indicate when the unit has power.
VIDEO
2
4
PWR
1234 56
INPUTS
AUDI O
LAYOUT
1
3
QuadV iew UHDx
LOCK
2
3
1 4 5 6 7

350-12245-01 – updated December, 2019 QuadView UHDx/UHDx KVM User Guide 5
C H A P T E R 1
I n t r o d u c t i o n
RGB
1.3.2 Rear Panel Controls and Indicators (Standard)
Figure 1-2 shows the standard QuadView UHDx rear panel connectors, and Table 1-2 describes
them.
Figure 1-2 Rear Panel Connectors (Standard)
Table 1-2 QuadView UHDx Rear Panel Controls and Indicators (Standard)
ID Name Description
1Power Switch and AC Power
Receptacle.
Turn the power on or off using this switch. Connect the
included AC power cord to this receptacle, and then
connect the plug to an available electrical outlet.
2Optical output. Connect this port to the digital audio input port of your A/V
receiver or other audio processing equipment.
3Analog audio output. Stereo analog audio output. Use cables with 3.5-mm mini-
stereo plugs at one end to connect these jacks to an
audio/video (A/V) receiver or other audio processing
equipment.
4Analog audio inputs 1~6. Stereo, analog audio inputs. Use cables with 3.5-mm
mini-stereo plugs at one end to connect these jacks to
audio sources.
5PROG. Standard USB Type A port for updating QuadView UHDx
firmware.
6LAN. Connect this port to a network to use IP control.
7RS232. Connect an RS-232 cable from this port to an RS-232
device.
8HDMI output/ Connect an HDMI cable from this port to a High-Definition
(HD) or UHD display.
9HDMI input 1-4. Connect up to four (4) HD or 4K/UHD sources to these
inputs using HDMI cables.
DisplayPort input 5-6. Connect up to two (2) HD or 4K/UHD sources to these
inputs using DisplayPort cables.
OUTP U TS
L/R
HDMI
OPTI CAL
INPUTS
12345 6
HDMI 1 HDMI 2 HDMI 3 HDMI 4 DISPLAYPOR T 5 DISPLAYPORT 6
PROG LAN RS 232
21 5 6 73 4
8 9

RGB
C H A P T E R 1
I n t r o d u c t i o n
6 QuadView UHDx/UHDx KVM User Guide 350-12245-01 – updated December, 2019
1.3.3 Rear Panel Controls and Indicators (KVM)
Figure 1-3 shows the QuadView UHDx KVM rear panel connectors, and Table 1-3 describes
them.
Figure 1-3 Rear Panel Connectors (KVM)
Table 1-3 QuadView UHDx KVM Rear Panel Controls and Indicators
ID Name Description
1Power Switch and AC Power
Receptacle.
Turn the power on or off using this switch. Connect the
included AC power cord to this receptacle, and then
connect the plug to an available electrical outlet.
2Optical output. Connect this port to the digital audio input port of your A/V
receiver or other audio processing equipment.
3Analog audio output. Stereo analog audio output. Use cables with 3.5-mm mini-
stereo plugs at one end to connect these jacks to an
audio/video (A/V) receiver or other audio processing
equipment.
4Analog audio inputs 1~6. Stereo, analog audio inputs. Use cables with 3.5-mm
mini-stereo plugs at one end to connect these jacks to
audio sources.
5PROG. Standard USB Type A port for updating QuadView UHDx
firmware.
6LAN. Connect this port to a network to use IP control.
7RS232. Connect an RS-232 cable from this port to an RS-232
device.
8HDMI output/ Connect an HDMI cable from this port to a High-Definition
(HD) or UHD display.
9HDMI input 1-4. Connect up to four (4) HD or 4K/UHD sources to these
inputs using HDMI cables.
DisplayPort input 5-6. Connect up to two (2) HD or 4K/UHD sources to these
inputs using DisplayPort cables.
10 KVM outputs Connect computers to these ports for KVM control.
11 Mouse input Connect the mouse to use for KVM control here.
12 Keyboard input Connect the keyboard to use for KVM control here.
OUTPUTS
L/R
HDMI
O P TICAL
INPUTS
12345 6
HDM I 1 HD MI 2 HDM I 3 HDMI 4 DIS P LAYPORT 5 DI SP LAY P OR T 6 PROG
LAN RS232
1 234 56
2
1
5 6 7
3 4
8 9
10 11 12

350-12245-01 – updated December, 2019 QuadView UHDx/UHDx KVM User Guide 7
C H A P T E R 1
I n t r o d u c t i o n
RGB
Table 1-4 lists the QuadView UHDx and QuadView UHDx KVM specifications.
1.4 Specifications
Table 1-4 QuadView UHDx and QuadView UHDx KVM Specifications
Parameter Description
Inputs
Video 4 x HDMI 2.0
2 x DisplayPort 1.2
Resolution (max.) 3840 x 2160 @ 60 Hz
Color Sampling 4:4:4, 8-bit
HDCP 2.2 and 1.4 compliant
Audio Embedded audio from HDMI or DisplayPort sources
Stereo analog audio via 6 x 3.5mm mini jacks
Outputs
Video HDMI 2.0
Supported Resolutions Auto
3840 × 2160 @60Hz, @30Hz, or @24Hz (UHD)
1900 × 1200 @ 60Hz (WUXGA)
1920 × 1080 @ 60Hz or 50Hz (1080P)
1600 × 1200 @ 60Hz (UXGA)
1680 × 1050 @ 60Hz
1600 × 900 @ 60Hz reduced blanking
1400 × 1050 @ 60Hz
1440 × 900 @ 60Hz
1366 × 768 @ 60Hz
1360 × 768 @ 60Hz
1280 × 1024 @ 60Hz (SXGA)
1280 × 720 @ 60Hz or 50Hz (720P)
1280 × 800 @ 60Hz reduced blanking
1280 × 768 @ 60Hz
1024 × 768 @60Hz (XGA)
800 × 600 @60Hz
Audio 1 x HDMI (embedded)
1 x optical
1 x analog (2 channels via 3.5mm mini stereo jacks)
PCM 7.1 or PCM stereo output format

RGB
C H A P T E R 1
I n t r o d u c t i o n
8 QuadView UHDx/UHDx KVM User Guide 350-12245-01 – updated December, 2019
Control
Web QuadView UHDx Web Controller
Serial Serial 9-pin RS-232 port for command-line control by a PC or third-party control system
Network Network 10/100 Base-T Ethernet for command-line control via Telnet
USB USB 1 × USB 2.0 Type A for firmware update
USB (KVM model only) USB 6 x USB 2.0 Type B for computers/devices being controlled via KVM
USB 1 x USB 2.0 Type A mouse input for KVM control
USB 1 x USB 2.0 Type A keyboard input for KVM control
Power
Power Supply Universal 100-240 VAC, 50-60 Hz
Power Consumption
(maximum)
15 Watts
Environmental
Temperature Operating (nominal): 32 ºF to 104 ºF (0 ºC to 40 ºC)
Non-Operating: -4 ºF to 140 ºF (-20 ºC to 60 ºC)
Relative Humidity Operating: 20% to 90% non-condensing
Physical
Dimensions See Figure 1-4.
Dimensions are listed in [millimeters] and (inches)
Weight 7.3 lbs. (3.3 kg)
Specifications are subject to change without notice.
Table 1-4 QuadView UHDx and QuadView UHDx KVM Specifications (Continued)
Parameter Description