Roadmaster 12" Subwoofer VSW120 User manual

• Nail Set/Center Punch • Marker/Pen
• Safety Glasses • Electrical Tape
• Phillips Screwdriver
• Hammer
• Wire Cutter
• Electric Drill
with 1/16" bit
GIVE US A CALL, WE'LL HELP YOU INSTALL.
1-800-445-1797
PLEASE DO NOT RETURN PRODUCT TO STORE.
Visit us on the WEB
www.vr-3.com
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
Subwoofer Terminals
Wires from Amplifier
VSW120
12”Subwoofer
Dear Customer,
CONGRATULATIONS. The VSW120 Subwoofer, when used as described, will give you years
of dependable service in your car, truck, RV or mini-van. We have taken numerous measures
in quality control to ensure that your product arrives in top condition, and will perform to your
satisfaction. In the rare event that your VSW120 Subwoofer contains a damaged or missing
item, does not perform as specified, requires warranty service or you have an installation
problem, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR TOLL
FREE NUMBER FROM THE U.S.A. AND CANADA (800-445-1797) and ask to speak with
a member of our technical service team, or submit your questions by e-mail our web site
vr-3.com, and a member of our technical service team will respond by e-mail to your ques-
tions. Our in-house technical service team will expedite delivery of your part, advise you on
installation, or help troubleshoot a problem with you. If your product needs warranty service,
our technical service team representative will help you obtain the fastest remedy possible
under the warranty.
Before You Install
Tools Needed to Install
• 12” Embossed Polypropylene Cone
• 26.5 oz. Magnet Weight ±10%
• Black Rubber Surround
• 400 Watts Maximum Peak Power
• 40 watts RMS per Voice Coil
• 35 to 2000 Hz Frequency Response
• 2” ASV, Dual Voice Coil
• Impedance 4 Ohms +/- 15%
• Sensitivity 89db 1W/1M Minimum
• Quick Connect Terminals (Spade Lug Type)
Automotive audio equipment installations can be troublesome at times, even to the
most experienced of installation technicians. If you are not confident working with
electrical wiring, removing and reinstalling interior panels, carpeting, dashboards or
other components of your vehicle, please call our toll free help line [phone]
and our in-house technical service team will answer your installation questions.
Most car stereos do not have enough power to drive separate subwoofers, if your
mobile auto audio system does not have a separate amplifier installed, you will most
likely need to install one.
Before permanently installing the VSW120 speakers in your car, connect the wires
to the speakers according to your audio systems installation manual, in the approxi-
mate location you will install them. If you are satisfied with the location proceed with
the permanent installation.
If you are building your own sealed
box enclosure, it should have a vol-
ume of 1.5 to 2.0 cubic feet, and
made with a minimum of 5/8” thick
particle board or M.D.F.. Make
sure that you screw and glue it to-
gether for a proper seal, caulk all
seams, and joints with silicone rub-
ber caulking. The inner walls of the
enclosure should be covered with a
sound absorbing material. Maintain
polarity of the amplifier and speak-
er for proper phase alignment. This
insures the VSW120 operates at
maximum efficiency.
Seal the hole with silicone
caulking where the wire
passes through the side of
the speaker box.
Cover all inside walls of the enclosure
with a sound deadening material such
as Dacron batting.
5/8” thick
particle board
or M.D.F.
Give Us A Call, We’ll Help You Install
Speaker wire of 18 Gauge to 12 Gauge may be used with the VSW120C. You can
purchase speaker wire with spade lug type female disconnects pre-installed on one end.
Installation
To attach speaker wires (not
included) with female quick
connects (spade lug type) to
the speaker terminals.
Push the female quick
connects (spade lug type) onto
the terminals. Maintain proper
polarity by attaching the Posi-
tive Wire (+) to Positive Termi-
nal (+) and the Negative Wire (-)
to Negative Terminal (-).
If the female quick connects
can be easily pulled off, they
can be tightened a little bit by
lightly squeezing them with
a pair of pliers. Do not flatten
them completely.
Wiring
Installing in a Enclosure
The VSW120 is designed to give you optimum bass performance when installed in a
sealed speaker enclosure.
Specifications
Read First!
Limited Warranty
VIRTUAL REALITY VIDEO LABS®products are designed and manufactured to provide a high level of trouble-free per-
formance. VIRTUAL REALITY VIDEO LABS®warrants, to the original purchaser, that its products are free from defects
in material and workmanship for 30 days from the date of original purchase, as part of our commitment to product
excellence. VIRTUAL REALITY VIDEO LABS®and/or its affiliates routinely improves the designs, materials or produc-
tion methods of its existing products. Because it is impractical to publicize all changes in every product, we reserve the
right to make such changes without notice.
CONDITIONS OF WARRANTY:
If during the 30 day warranty period your new product is found to be defective, VIRTUAL REALIT Y VIDEO LABS®will
repair such defect, or replace the product, without charge for parts or labor subject to the following conditions:
1. All repairs must be per formed by VIRTUAL REALITY VIDEO LABS ®and/or its affiliates in Eatontown, New Je rsey.
2.
The equipment must not have been altered or been damaged through negligence, accident, or improper operation.
3. The replacement of parts are exempted from this warranty when replacement is necessary due to normal wear and tear.
4. All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.
5. Repair or replacement par ts supplied by VIRTUAL REALITY VIDEO LABS®under this warranty are protected only for
the unexpired portion of the original warranty.
6. In the case of car stereos, this warranty does not extend to the elimination of car static or motor noise; correction of
antenna problems; costs incurred for the removal or reinstallation of the product; damage to tapes, speakers, acces-
sories or car elec trical systems.
7. VIRTUAL REALITY VIDEO L ABS®will not be responsible for any charge incurred for installation.
OWNER’S RESPONSIBILITIES:
VIRTUAL REALITY VIDEO LABS®will make every effort to provide warranty service within a reasonable period of
time.
SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED, OR IF YOU WOULD LIKE ASSISTANCE IN OB-
TAINING SERVICE, PLEASE CALL TOLL FREE 1-800-445 -1797, 8:30am - 4:30pm EST.
In order to provide you with the proper wa rranty service, we request that you adhere to the following procedure:
1. Include a copy of your sales receipt or bill of sale with your unit when it is returned for warranty service.
2. If it is necess ar y to r et ur n your product for ser vi ce , pl ea se r et ur n it s ec ur el y pa cked, prefe ra bl y in t he o ri gi na l sh ip pi ng
carton, and freight and insurance prepaid to the following address: VIRTUAL REALITY VIDEO LABS, Service Depart-
ment, 41 James Way, Eatontown, New Jersey 07724.
3. Please include a detailed explanation of the problem you are having.
4. If your product is found by VIRTUAL REALITY VIDEO LABS ®to have a defect in material or workmanship, within
the warranty period, it will be repaired or replaced at no charge and returned to you prepaid. Where permitted by Iaw
VIRTUAL REALITY VIDEO LABS®liability shall be limited to that set forth in this warranty. This warranty shall be the
exclusive remedy of the purchaser.
Notes
Frequently Asked Questions
What if there is no sound?
1. Your stereo may have a blown fuse.
Replace fuse with the same amperage and style.
2. You may have improper wiring.
Refer to the wiring guide that came with your stereo/amplifier. Check all wires for a secure
connection.
What if the sound volume is low?
Your stereo may not have enough power, you may have to install an amplifier to drive a
subwoofer.
Why do I have a whining noise coming from the subwoofer?
You may have poor filtering of your alternator. If that is the case, then you may need to add
an alternator filter to the power lead.
Why do I have odd sounding noises coming from the subwoofer?
You may have corroded battery terminals and/or a weak battery. If the terminals on the
battery are corroded, clean them; then check the sound. If the sound system is still making
noises check battery strength. If it is low recharge or replace the battery.
Location Of Subwoofers
Virtual Realit y Sound Labs®makes no other warranty of any kind, expressed or implied; and all implied warranties, are
hereby disclaimed by Virtual Reality Sound Labs®and excluded from this warranty, Virtual Reality Sound Labs®, the
manufacturer, distributor and seller shall not be liable for any injur y, loss or damage, incidental or consequential, arising
out of the use or intended use of the product
©2008 Intellect ual Solutions , Inc., All Ri ghts Rese rved. All designs , logos and i mages ar e the exclusi ve proper ty of Intel lectual Solution s Inc.
and/or it s affilantes. US and Foreign Patents Pending. 071608 Printed in China 00000
Recommendations for Positioning the VSW120 in Your Vehicle:
Cars: Hatch Back or Trunk
SUVs: & Mini Vans: Cargo Area
Pick-up Trucks: Behind Front Seat
All auto audio components must be securely mounted. Driving styles and
road conditions such as sudden stops, sharp curves, and bumpy roads may
cause unsecured items to move about the vehicle, causing physical injuries
to vehicle occupants and/or vehicle damage.
Before installing in an enclosure use the VSW120 as a guide to mark the enclosure
for pilot holes. When you have marked the pilot hole positions drill them with a bit
that is smaller than the screws you will use to secure the speaker to the enclosure.
Attach the positive (+)
and negative (-) wires
found inside the
enclosure box to the
VSW120 terminals. At-
tach Positive (+) to posi-
tive (+), and negative (-)
to negative (-).
Place the subwoofer
into the opening of the
enclosure. Then align
the screw holes of the
subwoofer with the pilot
holes that you drilled.
Tighten the screws.
Place a subwoofer grill
(optional) over the sub-
woofer, then fasten the
subwoofer grill in place.
Attach wires from audio
source to the terminals
on back of the enclo-
sure.