Rudeco Play RP 5010 User manual

Rudeco A/S •Rødvej 6, Bursø • 4930 Maribo • Tlf. [phone]
[email protected] • www.rudeco.dk
|RP 5010 |
|SAN DIEGO |
Included instructions Page: Included instructions Page:
Digging plan 1,0 Kiosk 8,1
Floor 2,1 Vertical bar 8,2
Bow—Climbing net 4,4 HPL Panel 9,1
Slide 12070 5,2

Rudeco A/S •Rødvej 6, Bursø • 4930 Maribo • Tlf. [phone]
[email protected] • www.rudeco.dk 0
| STEPS FOR MOUNTING |
| RP 5010 |
1
2
3
4
5
6
7
8
9
1,0 Digging plan
2,1 Floor
8,1 Kiosk
9,1 HPL Panel
8,2 Vertical bar
4,4 Bow –Climbing Net
5,2 Slide 12070

Rudeco A/S •Rødvej 6, Bursø • 4930 Maribo • Tlf. [phone]
[email protected] • www.rudeco.dk 1
| DIGGING PLAN |
| RP 5010 |
|POSTS: M9ST210 |
Tip:
Place the floor on the ground at the desired location, and mark
where to dig.
Dig holes ø30cm for the posts, in 70cm depth. Keep in mind that
the zero-mark has to be placed in level with the ground.
For other holes: Take a look at the corresponding instructions.
Place the posts in holes, fill in soil, and stomp thoroughly . Repeat
until all the holes are filled.
If necessary, use concrete in holes.
1 00:30 11,0 kg
M9ST210
5CM

|FLOOR |
|M9GUGA + M9GUGAE |
Rudeco A/S •Rødvej 6, Bursø • 4930 Maribo • Tlf. [phone]
[email protected] • www.rudeco.dk 2,1
Mark Item Pcs. / Floor Item no.
A Fr. screw 8 X 90 8 41055
B Washer 8/24 8 41011
Tip:
Be precise with the height of the floor. Impetus goal of zero-point
mark to the top side of floor.
(Take a look at the front page of this folder)
Other parts depends on the location of the floor.
Rotate the floor acording to the items to be mounted at it.
Next step is to secure the system with HPL plates and beams.
1 00:20
23,0 kg
M9GUGA
1 00:15
21,5 kg
M9GUGAE
A+B
A+B
240
210
180
150
120
90
60
M9GUGAE
M9GUGA 5cm

|BOW—CLIMBING NET |
|M9BO120NE |
Rudeco A/S •Rødvej 6, Bursø • 4930 Maribo • Tlf. [phone]
[email protected] • www.rudeco.dk 4,4
2 01:00 25,4 kg
Mark Item Pcs. Item no.
A Fr. screw 8 X 90 4 41055
B Washer 8/24 4 41011
C Fr. Screw 6 x 50 8 41358
D Washer 6/15 8 41006
E Screw 6 x 80 4 41067
F Decorative washer 4 41016
Tip:
Dig ø30 x 50cm for supports.
Mount the supports on the bow (C+D), then mount the bow
underneath the floor. (A+B)
Align the top of the Bow with the floor.
Mount the hand list (E+F) as illustrated.
120CM
80-90CM
A+B
C+D
Place between the beams
underneath the floor.
100CM
70CM
E+F
50CM

|SLIDE |
|M9GB12070 - M9GB18070 - M9GB24070 |
Rudeco A/S •Rødvej 6, Bursø • 4930 Maribo • Tlf. [phone]
[email protected] • www.rudeco.dk 5,2
Mark Item Pcs. Item no.
A Fr. Screw 8 X 90 2 41055
B Fr. Screw 8 x 60 2 41053
C Washer 8/24 4 41011
D Screw 6 x 100 10 41068
E Decorative washer 10 41016
2 01:00 45,0 kg
M9GB12070
2 01:00 54,5 kg
M9GB18070
2 01:15 63,0 kg
M9GB24070
Tip:
Place the slide beams on top of the floor,
then mark up where to dig the hole for
support steel.
Dig 25 x 45cm in necessary depth.
Approx 50cm.
Mount slide ears before the slide. Then
mount the slide and level the support
steel in needed position. Fill in soil, and
stomp thoroughly.
Finish with mounting the handlist.
A+C
D+E
B+C
D+E
DIST
DIST PART
215 cm M9GB120
280 cm M9GB180
330 cm M9GB240
45 cm

Rudeco A/S •Rødvej 6, Bursø • 4930 Maribo • Tlf. [phone]
[email protected] • www.rudeco.dk
|KIOSK |
|M9D |
8,1
Mark Item Pcs. Item no.
A Screw 6 X 60 4 41066
B Screw 6 x 80 4 41067
C Decorative washer 8 41016
D Screw 4,5 x 70 6 41065
Tip:
Align the bottom of the HPL Plate to the bottom of the post and fix it
with screws. (A+C)
Mount the desk on top of the HPL plate. Fix with screws (D)
Mount the fruit sign with screws. (B+C)
1 00:20 6,9 kg
A+C
B+C
D

Rudeco A/S •Rødvej 6, Bursø • 4930 Maribo • Tlf. [phone]
[email protected] • www.rudeco.dk 8,2
|VERTICAL BAR |
|M9RL120 / M9RL150 / M9RL180 |
Tip:
Center the screws in the
middle of the posts.
120cm
150cm
180cm
1 00:15 5,1 kg
M9RL120
1 00:20 7,6 kg
M9RL180
Mark Item Pcs. Item no.
A Fr. Screw 8 x 90 4 / 6 41055
B Washer 8/24 4 / 6 41011
C Screw 6 x 80 4 41067
D Decorative washer 4 41016
A+B
80-90cm
C+D
1 00:18 6,3 kg
M9RL150
Min 23cm

Rudeco A/S •Rødvej 6, Bursø • 4930 Maribo • Tlf. [phone]
[email protected] • www.rudeco.dk
| HPL PANEL |
| M9RP—M9LE—M9TA |
9,1
1 00:10 4,9 kg
Mark Item Pcs. Item no.
A Screw 6 X 60 6 41066
B Decorative washer 6 41016
Tip:
Align the bottom of the HPL Panel to the top of the floor, and center
the panel between the posts.
A+B