SA Sport 355 Configuration guide

ASSEMBLY AND CARE INSTRUCTIONS
JUST FOR KIDS
355
VERSION: 8920100 (Revised 05/15)
SALES AND SERVICE
sasportonline.com
SA Sport – Canada and International
135 Forestview Road, PO Box 40
Orillia, Ontario, Canada L3V 6H9
Toll-Free: [phone]
Telephone: [phone]
Fax: [phone]
[email protected]
SA Sport – USA
104 Nu Energy Drive, Suite 1
Aledo, Texas, USA 76008
Toll-Free: [phone]
Telephone: [phone]
Fax: [phone]
[email protected]

355 JUST FOR KIDS Assembly Instructions
Page 2 of 25
Thank you for purchasing a product from our line of Just for Kids Gymnastics Apparatus. We
appreciate your business and value you as a customer.
Our immensely popular Just for Kids line of equipment will attract your littlest gym members – even
tots! You can build it a piece at a time as your budget allows or as a whole circuit in as little as 17’ x
17’ feet of floor space. Not only are all Just for Kids parts interchangeable, but you can also convert
your primary pieces of equipment into a wide range of fun, preschool accessories. Just for Kids grows
with you.
This apparatus is manufactured of the finest materials and has been thoroughly inspected before
leaving our plant. We are sure you will be pleased with its quality, durability and performance.
Please read the following instructions carefully before assembling and using your new equipment, as
they pertain to the particular apparatus you have purchased.
The exclamation mark symbol when seen in this manual is used to indicate warnings or items
that require special attention during the use or assembly of the apparatus.
Assembly, set-up and adjustment of this equipment should only be undertaken by
qualified persons. At no time should children or other unqualified persons undertake
the assembly, set-up, installation or adjustment of this equipment.
THE SA SPORT JUST FOR KIDS LINE IS DESIGNED AND INTENDED FOR USE BY
BEGINNER LEVEL GYMNASTS UNDER A WEIGHT OF 150 LBS (68 KG).
For assembly and set-up instructions, please read and follow all instructions below as they apply to
your particular piece or pieces of equipment.
Tools Required:
•7/32” & 3/16” Allen keys (Supplied with Just For Kids apparatus)
•2 Adjustable Wrenches
•3/4” or 19mm Socket, Extension and Ratchet
•Tape measure
•5/8” diameter carbide concrete drill bit
•Hammer drill, Shop Vacuum
•Anchor setting tool or Drift punch with a 5/16” diameter & at least 1.5” long end
•Hammer
•Safety Glasses
For information on REPLACEMENT PARTS, please see second section of this manual.
Be sure to read and follow all SAFETY INSTRUCTIONS on the last page of this manual before
attempting to use the apparatus.

355 JUST FOR KIDS Assembly Instructions
Page 3 of 25
Table of contents
1. Apparatus description.................................................................................................................4
1.1. 360 - Just For Kids Parallel Bars ............................................................................................4
1.2. 361 - Just For Kids Uneven Bars............................................................................................4
1.3. 362 - Just for Kids High Bar....................................................................................................4
1.4. 363 - Just for Kids Ring Frame...............................................................................................5
1.5. 364 - Just For Kids Low Bar ...................................................................................................5
1.6. 355-CS - Just for Kids Complete System ...............................................................................5
1.7. 355-55 - Just for Kids High Rail Assembly..............................................................................6
1.8. 355-60 - Just for Kids Low Rail Assembly ..............................................................................6
1.9. 355-105 Just for Kids Ring Frame Adjusting Tubes Assembly...............................................6
2. Set-Up, Assembly and Adjustments ..........................................................................................8
2.1. Pre-Assembly Instruction for Just for Kids Uprights (#355-05)...............................................9
2.2. Installing Concrete Anchors..................................................................................................10
2.3. Just for Kids Individual Base Tie-Down - 355-01..................................................................11
2.4. Just for Kids Complete System Base Tie-Down - 355-CS....................................................13
2.5. Just for Kids In-Line Layout Base Tie-Down.........................................................................16
2.6. Just for Kids Rail to Adjusting Tube Assembly .....................................................................18
2.7. Just for Kids Rail & Adjusting Tube Assembly to Uprights Assembly...................................19
2.8. Just for Kids Ring Frame to Uprights Assembly ...................................................................21
2.9. Changing Just for Kids Apparatus Configurations ................................................................22
2.10. Equipment Height Adjustment ..............................................................................................22
2.11. Horizontal Adjustment of Uprights ........................................................................................23
3. Spare parts.................................................................................................................................24
4. SAFETY.......................................................................................................................................25

355 JUST FOR KIDS Assembly Instructions
Page 4 of 25
1. Apparatus description
1.1. 360 - Just For Kids Parallel Bars
The SA Sport 360 Just for Kids Parallel Bars includes the following items:
•Just for Kids Base Assembly (#355-01): 1 Pair
oComplete with Tie-Down Hardware
•Just for Kids Upright Assembly (#355-352): 4 Pieces
oAssembled c/w Locking device & clamp
•Just for Kids Cross Tube (#355-360): 2 Pieces
•Just for Kids Low Adjusting Tube (#355-62): 4 Pieces
•Just for Kids Veneered Fiberglass Rail (#355-65): 2 Pieces
oComplete with mounting hardware
1.2. 361 - Just For Kids Uneven Bars
The SA Sport 361 Just for Kids Uneven Bars includes the following items:
•Just for Kids Base Assembly (#355-01): 1 Pair
oComplete with tie-down hardware
•Just for Kids Upright Assembly (#355-352): 4 Pieces
oAssembled c/w Locking device & clamp
•Just for Kids Cross Tube (#355-360): 2 Pieces
•Just for Kids Low Adjusting Tube (#355-62): 2 Pieces
•Just for Kids High Adjusting Tube (#355-57): 2 Pieces
•Just for Kids Veneered Fiberglass Rail (#355-65): 2 Pieces
oComplete with mounting hardware
1.3. 362 - Just for Kids High Bar
The SA Sport 362 Just for Kids High Bar includes the following items:
•Just for Kids Base Assembly (#355-01): 1 Pair
oComplete with tie-down hardware
•Just for Kids Upright Assembly (#355-352): 2 Pieces
oAssembled c/w Locking device & clamp
•Just for Kids Cross Tube (#355-360): 1 Piece
•Just for Kids High Adjusting Tube (#355-57): 2 Pieces
•Just for Kids Veneered Fiberglass Rail (#355-65): 1 Piece
oComplete with mounting hardware

355 JUST FOR KIDS Assembly Instructions
Page 5 of 25
1.4. 363 - Just for Kids Ring Frame
The SA Sport 363 Just for Kids Ring Frame includes the following items:
•Just for Kids Base Assembly (#355-01): 1 Pair
oComplete with mounting hardware
•Just for Kids Upright Assembly (#355-352): 2 Pieces
oAssembled c/w Locking device & clamp
•Just for Kids Cross Tube (#355-360): 1 Piece
•Just for Kids Ring Frame Adjusting Tube (#355-306): 2 Pieces
•Just for Kids Set of Rings (#355-110): 1 Pair
1.5. 364 - Just For Kids Low Bar
The SA Sport 364 Just for Kids Low Bar includes the following items:
•Just for Kids Base Assembly (#355-01): 1 Pair
oComplete with Tie-Down Hardware
•Just for Kids Upright Assembly (#355-352): 2 Pieces
oAssembled c/w Locking device & clamp
•Just for Kids Cross Tube (#355-360): 1 Piece
•Just for Kids Low Adjusting Tube (#355-62): 2 Pieces
•Just for Kids Veneered Fiberglass Rail (#355-65): 1 Piece
oComplete with mounting hardware
1.6. 355-CS - Just for Kids Complete System
The SA Sport 355-CS Just for Kids Complete System includes 1 each of the Apparatus Assemblies
360, 361, 362 and 363 as well as a 4 Station Circuit Base and a 4-piece set of Multi color Circuit
Mats. The following is a breakdown of all components for reference:
•Just for Kids Base Assembly (#355-01): 4 Pairs
oComplete with Tie-Down Hardware
•Just for Kids Upright Assembly (#355-352): 12 Pieces
oAssembled c/w Locking device & clamp
•Just for Kids Cross Tube (#355-360): 6 Pieces
•Just for Kids High Adjusting Tube (#355-57): 4 Pieces
•Just for Kids Low Adjusting Tube (#355-62): 6 Pieces
•Just for Kids Veneered Fiberglass Rail (#355-65): 5 Pieces
oComplete with mounting hardware
•Just for Kids Ring Frame Adjusting Tube (#355-306): 2 Pieces
•Just for Kids Set of Rings (#355-110): 1 Pair
•Just for Kids 4 Station Circuit Base (#355-154): 1 Piece
oComplete with Tie-Down Hardware
•Just for Kids 4 Pieces Set Circuit Mat (#355-230): 1 Set

355 JUST FOR KIDS Assembly Instructions
Page 6 of 25
1.7. 355-55 - Just for Kids High Rail Assembly
The SA Sport 355-55 Just for Kids High Rail Assembly includes the
following items:
•Just for Kids High Adjusting Tube (#355-57): 2 Pieces
•Just for Kids Veneered Fiberglass Rail (#355-65): 1 Piece
oComplete with mounting hardware
1.8. 355-60 - Just for Kids Low Rail Assembly
The SA Sport 355-60 Just for Kids Low Rail Assembly includes the
following items:
•Just for Kids Low Adjusting Tube (#355-62): 2 Pieces
•Just for Kids Veneered Fiberglass Rail (#355-65): 1 Piece
oComplete with mounting hardware
1.9. 355-105Just for Kids Ring Frame Adjusting
Tubes Assembly
The SA Sport 355-105 Just for Kids Ring Tower Adjusting
Tubes Assembly includes the following items:
•Ring Frame Adjusting Tube (#355-306): 2 Pieces
•Rings Assembly (#355-110): 1 Pair
oAssembled c/w straps & Quick Link

355 JUST FOR KIDS Assembly Instructions
Page 7 of 25

355 JUST FOR KIDS Assembly Instructions
Page 8 of 25
2. Set-Up, Assembly and Adjustments
Please first refer to sections 2.1. Pre-Assembly of Just for Kids Uprights & 2.2. Installing
Concrete Anchors.
Depending on the layout you chose for your Just for Kids Apparatus, please refer to the following
sections:
2.3 Just for Kids Individual Base Tie-Down - 355-01 Page 11
2.4 Just for Kids Complete System Base Tie-Down - 355-CS Page 13
2.5 Just for Kids In-Line Layout Base Tie-Down Page 16
Once bases are set-up properly, please refer to next assembly steps starting on Page 18.

355 JUST FOR KIDS Assembly Instructions
Page 9 of 25
2.1. Pre-Assembly Instruction for Just for Kids Uprights (#355-05)
This step must be done first, before any further Assembly of your Apparatus! Ensure
the screws are tightened securely!
1. Locate the two Just for Kids Uprights (#355-352), one
Just for Kids Cross Tube (#355-360) and the 7/32”
Allen key.
2. Slide the Cross Tube over the connection block with the
hole facing upwards as shown. Line up the holes and
thread the supplied 3/8” Flat Head Screw into the hole.
Tighten screw firmly with a 7/32” Allen key. (Fig. 1)
3. Repeat previous step to assemble the second Upright to
the Cross tube. The resulting assembly is now referred to
as a Just for Kids Upright Assembly Part #355-05.
4. Ensure the assembly is stable before proceeding.
Refer to the instructions below for complete details on Base fastening and assembly
of all other related components for the particular Just For Kids Apparatus.
Fig. 1
3/8” FLAT
HEAD SCREW
CROSS TUBE
UPRIGHT
CONNECTION BLOCK

355 JUST FOR KIDS Assembly Instructions
Page 10 of 25
2.2. Installing Concrete Anchors
To determine anchor locations, please refer to the section for the specific equipment
to be anchored. Anchors & Hardware are supplied with the Just for Kids Base
Assembly (#355-01).
Tools Required (customer supplied):
•Tape measure
•Anchor setting tool or punch with a 5/16” diameter & 1.5” long end
•5/8” diameter carbide tipped concrete drill bit
•Hammer drill
•3/4” or 19mm Socket, Extension and Ratchet
•Hammer
•Shop Vacuum for fine dust
SAFETY GLASSES, TO BE WORN DURING DRILLING, ANCHOR INSTALLATION AND
SETTING!
NEVER PLACE A FLOOR ANCHOR INTO A SEAM/CRACK, OR AN AREA WITHIN 9”
FROM A SEAM/CRACK OR OUTSIDE EDGE OF THE CONCRETE FLOOR.
1. With the 5/8” carbide drill bit installed in the Hammer drill, drill
a hole into the concrete to 2 inches depth (+1/8”).
2. Use a shop vacuum or turkey baster to remove all dust and
concrete chips out of the holes. Ensure the hole depth is at
least 2 inches (+1/8”).
3. Turn a hex head bolt 3 full turns into a floor anchor, and insert
it into the drilled hole (Fig. 2).
4. Use the hammer to tap the top of the bolt until the floor anchor
is flush with or just below the top of the concrete (Fig. 2).
5. Remove the hex head bolt, proceed to set the anchor and lock
it in place.
THE STEP OF LOCKING OR SETTING THE ANCHORS
IS CRITICAL. ENSURE THAT IT IS DONE CORRECTLY
(FIG. 3)!
6. Using a punch or setting tool (customer supplied), set the floor
anchor by striking the plunger in the center of the floor anchor.
Strike the setting tool or punch with a hammer repeatedly, to
expand the anchor in the hole (Fig. 3).
WHEN SECURING EQUIPMENT TO FLOOR ANCHORS
USING BOLTS, A TORQUE VALUE OF 20 FT LBS IS RECOMMENDED.
Fig. 2
Fig. 3