SA Sport JFK User manual

JFK / Product & Installation Instructions #8920100
February 2, 2015
sasportonline.com
Sales & Service
SA Sport (Canada) SA Sport (U.S.A.)
135 Forestview Road 7879 Will Rogers Blvd.
P.O. Box 40 Fort Worth, Texas
Orillia, Ontario USA 76140
Canada L3V 6H9
Telephone: [phone] Telephone: [phone]
Fax: [phone] Fax: [phone]
Toll Free: [phone] Toll Free: [phone]
“JFK” - Just For Kids

JFK Product & Installation Instructions #8920100 Feb 2, 2015 Pg. 2
Thank you for purchasing a product from our line of Just for Kids Gymnastics Apparatus. We
appreciate your business and value you as a customer.
Our immensely popular Just for Kids line of equipment will attract your littlest gym members –
even tots! You can build it a piece at a time as your budget allows or as a whole circuit in as
little as 17’ x 17’ feet of floor space. Not only are all Just for Kids parts interchangeable, but
you can also convert your primary pieces of equipment into a wide range of fun, preschool
accessories. Just for Kids grows with you.
This apparatus is manufactured of the finest materials and has been thoroughly inspected before
leaving our plant. We are sure you will be pleased with its quality, durability and performance.
Please read the following instructions carefully before assembling and using your new
equipment, as they pertain to the particular Apparatus you have purchased.
The exclamation mark symbol when seen in this booklet is used to indicate warnings or
items that require special attention during the use or assembly of the apparatus.
Assembly, set-up and adjustment of this equipment should only be undertaken by
qualified persons. At no time should children or other unqualified persons undertake the
assembly, set-up, installation or adjustment of this equipment.
The S/A Sport Just for Kids Line is designed and intended for use by beginner level
gymnasts under a weight of 150 lbs (68 kg).
For assembly and set-up instructions, please read and follow all instructions in Section II of this
booklet as they apply to your particular piece or pieces of equipment.
Tools Required:
•7/32” & 3/16” Allen keys (Supplied in bag attached to instructions)
•2 Adjustable Wrenches
•¾” or 19mm Socket, Extension and Ratchet
•Tape measure
•5/8” diameter carbide concrete drill bit
•Hammer drill, Shop Vacuum
•Anchor setting tool or Drift punch with a 5/16” diameter & at least 1.5” long end
•Hammer
•Safety Glasses
Be sure to read and follow all Safety Instructions in Section III of this booklet before attempting
to use the apparatus!
For information on Replacement Parts, please see Section IV of this booklet.

JFK Product & Installation Instructions #8920100 Feb 2, 2015 Pg. 3
SECTION I The Apparatus Description Page
360
Just for Kids
Parallel Bars
4
361
Just for Kids
Uneven Bars
4
362
Just for Kids
High Bar
4
363
Just for Kids
Ring Frame
5
364
Just for Kids
Single Low Bar
5
355
-
CS
Just for Kids
Complete System c/w 4
Mats
5
355
-
55
Just for Kids
High Rail Assembly
6
355
-
60
Just for Kids
Low Rail Assembly
6
355
-
105
Just for Kids
Ring Frame Adjusting Tubes c/w Rings
6
Chart
Just for Kids
Apparatus Component conversion chart
7
SECTION II Set-up, Assembly and Adjustments
Pre
-
Assembly Instruction For Collapsible
JFK
Uprights (355
-
05)
8
Installing concrete Anchors
9
Just for Kids
-
(355
-
01) Base Assemblies Tie
-
Down
10
Just for Kid
-
(355
-
CS) Complete System Base Assemblies Tie
-
Down
( Consisting of (355-154) 4 Station Circuit Base & (355-01) Base Assemblies)
11
Just for Kids
-
Rail to Inner Tube Assembly
14
Just for Kids
-
Rail & Inner Tube to Uprights Assembly
15
Just for Kids
-
Ring Frame to Uprights (Rings Assembly)
16
Just for Kids
-
Atta
ching Rings to Ring Frame Assembly
16
Changing
Just for Kids
Apparatus Configurations
17
Height Adjustments
17
Horizontal Adjustments of Uprights
18
SECTION III Safety
Safety Instructions
18
SECTION IV Spare Parts
Spare parts
19

JFK Product & Installation Instructions #8920100 Feb 2, 2015 Pg. 4
Section I THE APPARATUS DESCRIPTION
360 Just For Kids - Parallel Bars
The S/A Sport 360 Just for Kids Parallel Bars includes the following items:
•Base Assembly (#355-01)
oComplete with Tie-Down Hardware 1 pr
•Just for Kids Upright Assembly (#355-312)
oAssembled c/w Locking devices 4 ea.
•Just for Kids Upright Base Assembly (#355-320)
oAssembled c/w clamps 2 ea.
•Inner Tube Assembly – Low Rail (#355-62)
oAssembled c/w rail pivot 4 ea.
•Fiberglass Rail with Wood Veneer Assembly (#355-65)
oComplete with mounting hardware 2 ea.
361 Just For Kids - Uneven Bars
The S/A Sport 361 Just for Kids Uneven Bars includes the following items:
•Base Assembly (#355-01)
oComplete with tie-down hardware 1 pr
•Just for Kids Upright Assembly (#355-312)
oAssembled c/w Locking devices 4 ea.
•Just for Kids Upright Base Assembly (#355-320)
oAssembled c/w clamps 2 ea.
•Inner Tube Assembly – High Rail (#355-57)
oAssembled complete with rail pivot 2 ea.
•Inner Tube Assembly – Low Rail (#355-62)
oAssembled complete with rail pivot 2 ea.
•Fiberglass Rail with Wood Veneer Assembly (#355-65)
oComplete with mounting hardware 2 ea.
362 Just for Kids - High Bar
The following items are included in the S/A Sport model 362 Just for Kids High Bar:
•Base Assembly (#355-01)
oComplete with tie-down hardware 1 pr
•Just for Kids Upright Assembly (#355-312)
oAssembled c/w Locking devices 2 ea.
•Just for Kids Upright Base Assembly (#355-320)
oAssembled c/w clamps 1 ea.
•Inner Tube Assembly – High Rail (#355-57)
oAssembled complete with rail pivot 2 ea.
•Fiberglass Rail with Wood Veneer Assembly (#355-65)
oComplete with mounting hardware 1 ea.

JFK Product & Installation Instructions #8920100 Feb 2, 2015 Pg. 5
363 Just for Kids - Ring Frame
The S/A Sport 363 Just for Kids Ring Frame includes the following items:
•Base Assembly (#355-01)
oComplete with mounting hardware 1 pr.
•Just for Kids Upright Assembly (#355-312)
oAssembled c/w Locking devices 2 ea.
•Just for Kids Upright Base Assembly (#355-320)
oAssembled c/w clamps 1 ea.
•Ring Frame Adjusting Tube Assembly (#355-105)
oAssembled c/w Rings & mounting hardware 1 pr.
364 Just For Kids – Single Low Bar
The S/A Sport 360W Just for Kids Single Low Bar (Wood Rails) includes the following items:
•Base Assembly (#355-01)
oComplete with Tie-Down Hardware 1 pr
•Just for Kids Upright Assembly (#355-312)
oAssembled c/w Locking devices 2 ea.
•Just for Kids Upright Base Assembly (#355-320)
oAssembled c/w clamps 1 ea.
•Inner Tube Assembly – Low Rail (#355-62)
oAssembled c/w rail pivot 2 ea.
•Fiberglass Rail with Wood Veneer Assembly (#355-65)
oComplete with mounting hardware 1 ea.
355-CS Just for Kids –Complete System
The 355-CS Just for Kids Complete System from S/A Sport includes 1 each of the Apparatus Assemblies 360,
361, 362, and 363 as well as a 4 Station Circuit Base and a 4-piece set of Multi color Circuit Mats. The
following is a breakdown of all components for reference:
•Base Assembly (#355-01)
oComplete with tie-down hardware 4 pr
•Just for Kids Upright Assembly (#355-312)
oAssembled c/w Locking devices 12 ea.
•Just for Kids Upright Base Assembly (#355-320)
oAssembled c/w clamps 6 ea.
•Inner Tube Assembly – High Rail (#355-57)
oAssembled complete with rail pivot 4 ea.
•Inner Tube Assembly – Low Rail (#355-62)
oAssembled complete with rail pivot 6 ea.
•Fiberglass Rail with Wood Veneer Assembly (#355-65)
oComplete with mounting hardware 5 ea.
•Ring Frame Adjusting Tube Assembly (#355-105)
oAssembled c/w Rings & mounting hardware 1 pr.
•4 Station Circuit Base (#355-154)
oComplete with tie-down hardware 1 ea.
•4 pcs set Circuit Mat (#355-230) 1 set

JFK Product & Installation Instructions #8920100 Feb 2, 2015 Pg. 6
355-55 Just for Kids High Rail Assembly
The S/A Sport 355-55W Just for Kids High Rail Assembly (Wood
Rail) includes the following items:
•Inner Tube Assembly – High Rail (#355-57)
oAssembled complete with rail pivot 2 ea.
•Fiberglass Rail with Wood Veneer Assembly (#355-65)
oComplete with mounting hardware 1 ea.
355-60 Just for Kids Low Rail Assembly
The S/A Sport 355-60 Just for Kids Low Rail Assembly includes
the following items:
•Inner Tube Assembly – Low Rail (#355-62)
oAssembled, complete with rail pivot 2 ea.
•Fiberglass Rail with Wood Veneer Assembly (#355-65)
oComplete with mounting hardware 1 ea.
355-105 Just for Kids Ring Frame Adjusting Tubes Assembly
The S/A Sport 355-105 Just for Kids Ring Tower Adjusting Tubes
Assembly includes the following items:
•Ring Frame Adjusting Tubes (#355-306)
oComplete with ring mounting hardware 2 ea.
•Rings Assembly (#355-110)
oAssembled c/w straps & Quick Link 1 pr.

JFK Product & Installation Instructions #8920100 Feb 2, 2015 Pg. 7

JFK Product & Installation Instructions #8920100 Feb 2, 2015 Pg. 8
Section II SET-UP, ASSEMBLY AND ADJUSTMENTS
Pre-Assembly Instruction for Collapsible JFK Uprights (355-05)
Note: This step must be done first, before any further Assembly of your Apparatus!
Ensure the screws are tightened securely!
1. Locate the two Upright Ends (355-312), a Base Tube and
the 7/32” Allen key.
2. Slide the Base Tube over the connection block with the hole
facing upwards as shown. Line up the holes and thread the
supplied 3/8” Flat Head Screw into the hole. Tighten screw
firmly with a 7/32” Allen key. (Fig. 1)
3. Repeat previous step to assemble the other upright to the
base tube. The resulting assembly is now referred to as a
JFK Upright Assembly Part #355-05. (Fig. 2)
4. Ensure the assembly is stable before proceeding.
Note: Refer to the Main JFK Assembly literature for complete
details on Base fastening and assembly of all other
related components for the particular Just For Kids
Apparatus.
Fig. 1
Fig. 2 – Uprights and Base Tube Assembled
3/8” FLAT
HEAD SCREW
BASE TUBE
UPRIGHT END
CONNECTION BLOCK

JFK Product & Installation Instructions #8920100 Feb 2, 2015 Pg. 9
Installing Concrete Anchors
Note: To determine anchor locations, please refer to the section for the specific equipment
to be anchored, Anchors & hardware are supplied with the Base Assemblies.
Tools Required (customer supplied):
•Tape measure
•Anchor setting tool or punch with a
5
/
16
” diameter & 1.5” long end
•
5
/
8
” diameter carbide tipped concrete drill bit
•Hammer drill
•¾” or 19mm Socket, Extension and Ratchet
•Hammer
•Shop Vacuum for fine dust
•Safety glasses, to be worn during Drilling, Anchor
installation and setting!
Note: Never place a floor anchor into a seam/crack,
or an area within 9” from a seam/crack or
outside edge of the concrete floor
1. With the 5/8” carbide drill bit installed in the Hammer
drill, drill a hole into the concrete to 2 inches (+
1
/
8
”).
2. Use a shop vacuum or turkey baster to remove all dust
and concrete chips out of the holes. Ensure the hole depth is at least 2 inches (+
1
/
8
”).
3. Turn a hex head bolt 3 full turns into a floor anchor, and insert it into the drilled hole (FIG 1).
4. Use the hammer to tap the top of the bolt until the floor
anchor is flush with or just below the top of the concrete
(FIG 1).
5. Remove the hex head bolt, proceed to set the anchor and
lock it in place!
The step of locking or setting the anchors is critical;
ensure that it is done correctly (FIG 2)!
6. Using a punch or setting tool (customer supplied), set
the floor anchor by striking the plunger in the center of
the floor anchor. Strike the setting tool or punch with a
hammer repeatedly, to expand the anchor in the hole
(FIG 2).
When securing equipment to floor anchors using bolts, a torque value of 20 ft lbs is
recommended.
FIG 2
FIG 1

JFK Product & Installation Instructions #8920100 Feb 2, 2015 Pg. 10
Just for Kids - (355-01) Base Assemblies Tie-Down
S/A Sport recommends that the Base Assemblies be bolted to the floor.
They have been designed and supplied with the required hardware for
bolting to a concrete floor.
This procedure will require at least two (2) qualified
persons. Children or other unqualified personnel should at
no time undertake any part of this procedure.
1. Position the apparatus in the desired location. Align both Base Leg assemblies (355-01) as shown in FIG 1.
Ensure that the numbers on the side of the bases, the adjustment scale face away from centre.
2. Install 1 or 2 JFK upright assemblies (355-05) between the 2 (355-01) Base Assemblies (FIG 1), Tighten the
clamp (FIG 1A) on the lower section of each side of the “JFK” (355-05) Uprights by turning Clockwise, this
will assist in maintaining the correct width and alignment.
Note: The Base Assemblies must be parallel to each other to allow for proper and complete
horizontal adjustment of the Uprights along the length of the Base Assemblies.
Note: Never place a floor anchor into a crack, or an area within 9” from a crack or into the edge of
the concrete.
FIG 1
Note: Install "JFK" Upright Assemblies onto Bases before
drilling Anchor holes.
Use diagonal Measurements (997
8") to help square up
bases, when measured the two diagonal distances
should be approximately the same.
7

9

8

7

9

8

FIG 1A