
Re-tuning: SAGEM Freeview Boxes
This guide can be used to help you re-tune any of the following products with the remote control below:
1) Press the Menu
button
Make sure your box is on and press 80
for the BBC News channel
2) Use the Down Arrow
button to select
Installation on the
second line of the
menu and press the
OK button
3) If requested enter
Pin Number (1-
2-3-4 unless you
have changed it)
and press the OK
button
4) Select Box Settings
on the second line
of the Installation
Menu and press
the OK button
5) Select Reset and
press the OK
button again
14 Steps
(Steps 1-5)
14 Steps
(Steps 1-5)
Manufacturer Helpline: 0845 0900 316 email: support@sagemtechnical.com
ITD58, ITD59, ITD60, ITD61,
ITD62, ITD66, ITD68, ITD72
*This process may affect any saved information stored on your product, including your favourites list.
Please consult your instruction manual or contact the manufacturer using the details above.