SAGEMCOM DCI85HD KD User manual

User manual
RECEIVER
DCI85HD KD

1
DCI85HD KD
Congratulations!
This Receiver is an innovative product from the latest generation of Sagemcom digital TV receivers,
dedicated to Digital Cable Television. It allows easy reception of digital programs, including those
broadcast in High Definition.
Once you have connected your Receiver and performed the initial installation, you will be able to watch
and enjoy all the cable TV and radio channels which are not scrambled and you are entitled to. You can
update your Receiver if new functions or services become available.
The Sagemcom Receiver follows a continuous development strategy. Therefore, we reserve the right to
make changes and improvements to the product described in this user manual without any prior notice.
This product complies with EMC directive 89/336/EEC.
CE marking:
The CE marking certifies that the product complies with the essential requirements of the Directive
1999/5/EC concerning radio equipment and telecommunication equipment, and of Directives 2006/95/EC
concerning safety, 2004/108/EC concerning electromagnetic compatibility and ErP 2009/125/EC
concerning ecodesign requirements, defined by the European Parliament and Council to minimize
electromagnetic interferences, ensure the safety of users and their equipment and protect their health,
and minimize the impact of products on the environment.
The CE declaration of conformity can be viewed in the support section of the Sagemcom site
www.sagemcom.com, or it can be obtained from the following address:
Sagemcom Broadband SAS - Customer relations department
250 route de l'Empereur
92848 Rueil-Malmaison Cedex - FRANCE
Copyright © Sagemcom Broadband SAS
All rights reserved
Sagemcom is a registered trademark.
This "HD TV" Television Receiver complies with the "HD TV" Minimum Requirements. The "HD TV" Logo
is a trademark of DIGITALEUROPE. HDMI, HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
DTS is a registered trademark of Digital Theater Systems, Inc.
Macrovision is a registered trademark of Rovi Corp.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are registered
trademarks of Dolby Laboratories Inc.
Macrovision Copyright notice
This product incorporates copyright protection technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright protection technology must be authorized by Rovi
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by
Rovi Corporation. Reverse engineering or diassembly is prohibited.

2
DCI85HD KD
Read this first!
For your safety and comfort, we urge you to carefully read the Safety recommendations on page 3
before attempting use.
This document makes use of symbols designed to help the reader identify the information supplied:
Symbol Definition
CAUTION
Indicates important safety information.
Failure to respect these notes may lead to serious or even fatal injury. Read
these notes carefully. You will find them in the Safety section of this manual.
WARNING
Indicates important safety information.
Failure to respect these notes may lead to minor to moderate injury, or
damage to the apparatus or equipment. Read these notes carefully. You will
find them in the Safety section of this manual.
Important
Indicates points to be read with special attention when using the device, and
explanations of probable reception issues. Read these explanations carefully.
Note
Indicates additional explanations about device functions, and instructions for
resolving user errors.

3
DCI85HD KD
Safety recommendations
Use of the Receiver is subject to safety measures designed to protect users and their environment.
Where to put your Receiver?
In order to guarantee the correct operation of your Receiver, you must:
•place it indoors to protect it from lightning, rain, and sun rays,
•place it in a dry and well ventilated area,
•keep it away from heat sources such as radiators, candles, lamps,
etc.
•protect it from dampness, place it on a flat surface from where it
will not fall off and children don`t have access to,
•do not place anything on top of your Receiver (as it would restrict
ventilation): the ventilation slots located on the casing prevent
your Receiver from overheating. If you place the Receiver in a
compartment, leave a space of at least 10 cm on each side and
20 cm on the front and back of the Receiver,
•connect it directly to the mains with the provided cords, the socket
must be near the Receiver and easy to access. The use of an
extension cable (with multi-points) is not recommended.
Warnings and safety instructions
NEVER OPEN THE Receiver! YOU RISK GETTING AN ELECTRIC SHOCK.
•Use only the power cord supplied with the Receiver to connect it to the mains. Other
practice may be dangerous.
•Connect the Receiver to the mains in accordance with the installation instructions in this
document and the indications mentioned on the identification label (voltage, current,
frequency of electricity network).
•As a precaution, in case of danger, the mains adapters act as a disconnecting mechanism
for the 230V power supply. That is why it is imperative that you connect the Receiver to a
power outlet located nearby and easily accessible.
•The Receiver must be used within a temperature range of between 0 °C and 40 °C.
•You must imperatively connect the power cord to the Receiver before connecting the power cord to the
power socket.
•To avoid short-circuits (fire or electrocution hazard), do not expose your Receiver to dampness. Do not
place any object containing liquid (vase for example) on the appliance. The Receiver must not be
splashed with liquid. If liquid is dropped, dripped onto the Receiver, unplug it immediately from the
mains and consult your supplier.
•Take care not to allow liquids or metal objects to enter the Receiver through the ventilation slots.
•Avoid reconnecting the Receiver after it has been subjected to large changes in temperature.
•The Receiver must be disconnected from mains supply (from the power outlet or rear panel) before
any modification of connection between TV, VCR or antenna.
•In the event of a storm, it is advisable to unplug the antenna. Even if the Receiver and the television
set are disconnected from the power supply, lightning can still damage them.
•Only a personnel approved by the manufacturer can repair the Receiver. The non-observance of these
safety precautions can result in forfeiture of the guarantee.

4
DCI85HD KD
Batteries
Batteries are easily swallowed by young children. Do not allow young children to play with the remote
control.
To avoid damaging the remote control, only use identical batteries or batteries of equivalent type. The
batteries provided are not rechargeable.
Interference
Do not place the Receiver near appliances that may cause electromagnetic interferences (for example
loudspeakers). This could affect Receiver operation and distort the picture or sound.
Cleaning the Receiver
The outer casing of the Receiver can be cleaned with a soft and dry cloth. Do not use any type of abrasive
pad, scouring powder or solvents, such as alcohol or turpentine, as they could damage the surface of the
Receiver.

5
DCI85HD KD
Environment
Preservation of the environment is an essential concern of the manufacturer. The desire of the
manufacturer is to operate systems observing the environment and consequently it has decided to
integrate environmental performances in the life cycle of its products, from manufacturing to
commissioning, use and elimination.
Meaning of logos present on the product or its packaging
The crossed-out dustbin sign stuck on the product or its accessories means that at the end of its
life, the product is subject to selective collection and must not be thrown away in unsorted
household waste.
The looped arrow sign means that the packaging may be recycled and must not be disposed of
with household waste.
The green logo means that a financial contribution is paid to an approved national organisation to
improve packaging recovery and recycling infrastructures.
The logo with three arrows shown on the plastic parts means that they may be recycled and that
they must not be disposed of with household waste.
Product recycling and disposal
To facilitate recycling, please respect the sorting rules set up locally for this kind of waste.
If your product contains batteries, they must be disposed of at appropriate collection points.
European regulations ask you to dispose of products belonging to the family of electrical and electronic
equipments ( ) selectively:
•At the collection points made available to you locally (drop-off centre, selective collection, etc.),
•At sales points in the event of the purchase of similar equipment.
In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste,
which can have an effect on the environment and human health.
European Directive on Waste Electrical and Electronic Equipment (WEEE)
In the context of sustainable development, the reduction of wastes to be eliminated by reusing, recycling,
composting and energy recovery is strongly advised.
In order to comply with this directive which is applicable to EEEs sold after 13/08/2005, your Receiver will
be taken back free of charge and recycled by the distributor of the EEE within the limits of the quantity and
types of equipment bought from them. These appliances which contain substances potentially dangerous
to human health and the environment will be recycled.

6
DCI85HD KD
Directive on the Restriction of use of certain hazardous substances in electronic
equipment (ROHS)
Your Receiver along with the batteries supplied comply with the directive relating to the RoHS –
dangerous materials such as lead, mercury or cadmium are not used. This avoids environmental hazards
and any risks to the health of personnel at the recycling centres. The batteries of the remote control can
be removed simply.
Note: When the batteries of the remote control are worn out, please dispose of them at a collection point
and not with household waste.
Electrical consumption of the Receiver
To reduce the consumption of your Receiver, you are recommended to place it in standby mode when not
in use. We recommend you to turn off the Receiver or unplug it from the mains if you will not be using it for
a prolonged period of time.

7
DCI85HD KD
Contents
1. Product Overview ....................................9
1.1 Package contents ......................................... 9
1.2 Elements and functionalities: Front side
of the device ............................................... 10
1.3 Elements and functionalities: Back side
of the device ............................................... 10
1.4 Remote control ........................................... 11
Batteries .............................................................11
2. Connections to the network and
connecting additional devices ..............12
2.1 Connection to the cable network ................ 12
RF Cable connection..........................................12
2.2 Connection to TV ........................................ 13
Connection to High Definition TV with
HDMI® port ........................................................13
Connection to a standard definition TV
with SCART connection .....................................13
2.3 Connection to the internet........................... 14
Internet connection via wireless stick .................14
Internet connection via network cable ................14
2.4 Connection to the VCR / DVD recorder ...... 14
2.5 Connection with a home cinema amplifier .. 15
2.6 Connection to a hi-fi unit ............................. 15
2.7 Powering On / Off the Receiver .................. 16
3. Initial installation ....................................17
3.1 Preparation: Device checks the device
settings ....................................................... 17
3.2 Language settings ...................................... 17
3.3 The five steps of the installation wizard ...... 18
Step 1: Channel search......................................18
Step 2: Set up favorite channels ........................18
Step 3: Setting up an internet connection ..........19
Step 4: Select energy mode ...............................20
Step 5: Summary................................................20
4. Basic functions ......................................21
4.1 Selecting a TV channel............................... 21
Using P+/P- or 0-9..............................................21
Program information bar.....................................21
Using the channel list .........................................22
Detailed program information .............................23
4.2 Volume settings .......................................... 23
Volume ...............................................................23
Mute ...................................................................24
4.3 Language settings for audio and subtitles
and selection of option channels.................. 24
Language for audio............................................ 24
Language for subtitles ....................................... 24
Selecting option channels.................................. 24
4.4 Teletext ....................................................... 25
4.5 Listen to radio.............................................. 25
Selecting a radio channel .................................. 26
Categories and other options in radio mode...... 26
5. Setting a timer ....................................... 27
5.1 Set timer...................................................... 27
Set flags in program information bar.................. 27
Set timer in electronic program guide (EPG) ..... 27
Set timer in search results ................................. 28
Delete timer ....................................................... 28
5.2 Set timer manually....................................... 28
5.3 Displaying and using timers ........................ 29
6. Electronic program guide (EPG),
search function and Select Video
(video library) ........................................ 31
6.1 Electronic Program Guide (EPG) ............... 31
6.2 Search ........................................................ 32
Search by keyword ............................................ 32
Search by category............................................ 33
Search results.................................................... 34
Local Search...................................................... 34
6.3 Select Video (online video library)............... 35
Access to Select Video ...................................... 35
Selection of videos............................................. 35
7. Settings ................................................. 37
7.1 System Update............................................ 37
Software update................................................. 37
Search for updated software.............................. 37
Channel search.................................................. 38
Delete additional channels................................. 39
Search additional channels................................ 39
Start a channel search....................................... 39
Reset to factory default...................................... 40
Update EPG....................................................... 40
7.2 System set-up ............................................. 41
Language........................................................... 41
Audio.................................................................. 41
Picture................................................................ 43
Energy settings .................................................. 45
Internet............................................................... 46

8
DCI85HD KD
7.3 Protection of minors.................................... 50
Change Parental Control PIN.............................50
Change Adult PIN...............................................51
PIN request when ordering Select Video ...........51
PIN-protect timer ................................................52
7.4 Timer settings ............................................. 52
Manual timer.......................................................52
Timer extensions ................................................53
7.5 Favorites ..................................................... 53
Add favorites ......................................................53
Delete favorites ..................................................54
Sort favorites ......................................................54
7.6 Service........................................................ 55
Support by phone ...............................................55
Service messages ..............................................55
7.7 System Check ............................................ 55
Device Info .........................................................55
Smartcard...........................................................56
TV Signal............................................................56
VOD Signal.........................................................56
HDMI ..................................................................56
TV picture ...........................................................56
Audio ..................................................................56
Network settings.................................................57
Back channel......................................................57
Test IP Connection.............................................57
7.8 Settings overview........................................ 58
8. Software update .....................................62
9. Universal remote control .......................63
9.1 Programing the universal remote control.... 63
9.2 Selection of the volume control................... 64
9.3 Reading out the 4-digit code....................... 64
9.4 Reset the universal remote control ............. 64
9.5 Brand Code List .......................................... 65
10. Troubleshooting .....................................74
11. Support ...................................................75
12. Explanation of terms .............................76
13. Specifications .........................................77

9
DCI85HD KD
1 Product Overview
Your Receiver is a digital receiver that lets you watch all the cable TV and radio channels which are not
scrambled and you are entitled to.
1.1 Package contents
The package of your new device includes:
In addition, a smartcard from Kabel Deutschland is provided for the operation of the device.
Item Description
1Receiver
2Power cord
3Remote control with 2 batteries (AAA)
4HDMI lead for connection to the HDTV
5Antenna cable to connect to the cable network
6Quick installation guide
7WLAN-Stick and cable
7
54
1
234
5
67
89
10 11 12
13 14 15
16 17 18
19 20 21
22 23 24
25 26
27 28 29 30
31 32 33
34 35 36
37 38 39
40 41 42
TV/Radio
Menü
Suche
Aufnahmen
P
OK
Zurück Info
Rec
Opt
1
4
23
6
78
5
9
0
321
6

10
DCI85HD KD
1.2 Elements and functionalities: Front side of the device
1.3 Elements and functionalities: Back side of the device
Item Description Item Description
1STANDBY button 3TV/radio button
Switch to Standby/Wake up from
standby
•Red: Device in standby
•Green: Device is running
Switch between TV and radio channels
•orange: radio mode active
2USB port 4P+/P- changing channels
Item Description Item Description
5On/Off switch 11 DIGITAL AUDIO connector
(Optical S/PDIF)
6Power supply connector 12 SCART connector (to TV)
7Ethernet port (RJ45) 13 SCART connector (to VCR or
DVD Recorder)
8USB port 14 Cable signal output
9Analog AUDIO connectors
(ANALOG AUDIO L/R) to Hi-fi system
or TV
15 Cable signal input
10 HDMI DIGITAL VIDEO AUDIO
connector

11
DCI85HD KD
1.4 Remote control
Batteries
The remote control needs two batteries (AAA) to operate. The direction to insert the batteries is labeled in
the battery compartment. The batteries are not rechargeable.
Button Functions
1TV: Switch to TV mode, if programed. In TV mode, you can
control your TV with this remote (see chapter 9, Using the
universal remote). The unit is in TV mode, the LED light
flashes.
2MENÜ: Open and close main menu
3PROGRAMM: Show electronic program guide (EPG)
4SELECT VIDEO: Open online video library Select Video
(Video on Demand, VOD), internet connection necessary. This
service is not yet available everywhere in Germany.
5V+/V-: Adjust the volume
6NAVIGATION: Browse menu, electronic program guide (EPG),
program information bar and other functionalities
7ZURÜCK: Return to the previous screen or mode
8MUTE: Turn the sound on or off
9REWIND: Rewind program or recorded program, switch to
other day in electronic program guide (EPG)
10 REC: Timing a program or prepare a timer using the electronic
program guide (EPG).
11 COLOR KEYS: Select options in the On Screen Display
(OSD), menus and messages, that are displayed on the
screen
12 0-9: Choose programs and options from the On Screen
Display (OSD)
13 OPT: Displays options for the current program (Audio
Language / Subtitle, option channels). Shows program
information for prime time in electronic program guide (EPG)
14 STANDBY: Switch to Standby/Wake up from standby
15 TV/RADIO: Switch between TV and radio channels
16 EXIT: Close a screen or a mode, return to the last viewed
program, switch from TV mode to Receiver mode
17 AUFNAHMEN: : Displays the timed program list
18 SUCHE: Starts a search for programs in electronic program
guide (EPG), in online video library Select Video and
recordings
19 P+/P-: Jump to next / previous channel, display next / previous
page in electronic program guide (EPG), browse in multipage
lists / references
20 OK: Show program information bar, confirm a selection
21 INFO: Show informations for current program, in electronic
program guide (EPG) and program search
22 FAST FORWARD: Forward switch to other day in the
electronic program guide (EPG)
23 PLAY/PAUSE: Play / pause a recorded program, switch to
time-shifted mode
24 STOP: Stop a recording, stop playing a recorded program,
stop the time shift mode and return to live TV program
25 TELETEXT: Show teletext pages, if available

12
DCI85HD KD
2 Connections to the network and connecting
additional devices
Check if the package is complete before installing the Receiver (see chapter 1.1, Package contents).
Make sure that the devices to be connected (Receiver, TV, VCR ...) are disconnected from the power
supply.
2.1 Connection to the cable network
To make sure that your Receiver can receive all the cable TV and radio channels which are not scrambled
and you are entitled to, you must check first of all that your home is connected to cable network.
2.1.1 RF Cable connection
1. Connect the antenna cable input of the Receiver with the antenna socket (antenna cable provided).
2. Connect the antenna cable output of the Receiver with the antenna socket of the TV or VCR/DVD
Recorder (antenna cable not provided).
ANALOG
AUDIO
KABEL
EINGANG
KABEL
AUSGANG
VCR SCART TV SCART
DIGITAL
AUDIO
HDMI
L
R
NETZWERK
USB
EIN / AUS
19W
230V~50Hz
I
O

13
DCI85HD KD
2.2 Connection to TV
2.2.1 Connection to High Definition TV with HDMI®port
In order to take advantage of high-definition television (HDTV), connect the HDMI®port on your digital
Receiver through the HDMI®cable (provided) to the HDMI ® port on your HD TV.
2.2.2 Connection to a standard definition TV with SCART connection
Connect the TV SCART connector on the Receiver through a SCART cable (not provided) with a free
SCART socket on your TV.
Note
If you have a TV with HDMI®port, please use only the HDMI®cable to connect
the Receiver to TV.
ANALOG
AUDIO
KABEL
EINGANG
KABEL
AUSGANG
VCR SCART TV SCART
DIGITAL
AUDIO
HDMI
L
R
NETZWERK
USB
EIN / AUS
19W
230V~50Hz
I
O
ANALOG
AUDIO
KABEL
EINGANG
KABEL
AUSGANG
VCR SCART TV SCART
DIGITAL
AUDIO
HDMI
L
R
NETZWERK
USB
EIN / AUS
19W
230V~50Hz
I
O

14
DCI85HD KD
2.3 Connection to the internet
With an internet connection you have numerous other offers from Kabel Deutschland. To use them,
connect your Receiver to the internet, either through the wireless stick or via a network cable (LAN cable).
2.3.1 Internet connection via wireless stick
Slide the WLAN-Stick into the USB port for the WLAN dongle below the Network connector
(RJ45). If the Receiver is connected to the power supply after all devices were connected,
the wireless stick automatically starts. You may be prompted to enter the necessary data
later.
2.3.2 Internet connection via network cable
If you wish to connect your Receiver to the internet using a network cable with RJ45
connectors (LAN cable), plug in such a network cable (not provided) into the network port
(RJ45) on the back of the Receiver. Plug the other end of the network cable to a free
network connection to your internet router. You may be prompted to enter the necessary
data later.
2.4 Connection to the VCR / DVD recorder
Connect the VCR SCART connector on the back of your Receiver with a free SCART socket on your
VCR-/DVD-Recorder (cable not provided).
Note
If your VCR / DVD recorder has more than one SCART socket, select the TV
or EXT1 port.
NETZWERK
USB
NETZWERK
USB
ANALOG
AUDIO
KABEL
EINGANG
KABEL
AUSGANG
VCR SCART TVSCART
DIGITAL
AUDIO
HDMI
L
R
NETZWERK
USB
EIN / AUS
19W
230V~50Hz
I
O
TV
EXT
DIGIT
DIGIT
AL
AL
AUDIO
HDMI
H

15
DCI85HD KD
2.5 Connection with a home cinema amplifier
Some programs are broadcast with DTS or DOLBY DIGITAL sound. To fully enjoy this high sound quality
it is recommended to connect your Receiver via the optical S / PDIF connection with a home cinema
amplifier.
Use an optical S / PDIF cable (not supplied) to connect the DIGITAL AUDIO port of the Receiver to the
DIGITAL AUDIO port of the home cinema amplifier.
2.6 Connection to a hi-fi unit
To enjoy digital broadcasts in high sound quality and to listen to radio channels with switched off TV,
connect the two analog AUDIO terminals (ANALOG AUDIO L / R) of the Receiver to the AUDIO terminals
of your hi-fi system (cable not provided). This is only possible if you do not use the two analog AUDIO
terminals (ANALOG AUDIO L / R) of the Receiver for connecting a TV.
ANALOG
AUDIO
KABEL
EINGANG
KABEL
AUSGANG
VCR SCART TV SCART
DIGITAL
AUDIO
HDMI
L
R
NETZWERK
USB
EIN / AUS
19W
230V~50Hz
I
O
D
HDMI
ANALOG
AUDIO
KABEL
EINGANG
KABEL
AUSGANG
VCR SCART TV SCART
DIGITAL
AUDIO
HDMI
L
R
NETZWERK
USB
EIN / AUS
19W
230V~50Hz
I
O

16
DCI85HD KD
2.7 Powering On / Off the Receiver
You have all the equipment (Receiver, TV, VCR) connected? Connect the Receiver to the power network
and turn it on. To turn on the Receiver proceed as follows:
1. Make sure that the power switch "On / Off" on the back of the Receiver is set to "Off" (position 0).
2. Now connect the power cord to the power connector of the Receiver.
3. Plug the power cord into a power outlet near the equipment so you can easily access it.
4. Press the "On / Off" button to switch the Receiver on (position I).
The initial installation of your Receiver will start automatically.
If you need to turn off the Receiver (for example, before a long period without using it), proceed as
follows:
1. Press the STANDBY button on the remote control or on the front of the Receiver to switch the Receiver
to standby mode.
2. Press the "on / off" switch on the back of the Receiver to turn off the Receiver (position O).
3. Unplug the power cord from the socket.
ANALOG
AUDIO
KABEL
EINGANG
KABEL
AUSGANG
VCR SCART TV SCART
DIGITAL
AUDIO
HDMI
L
R
NETZWERK
USB
EIN / AUS
19W
230V~50Hz
I
O

17
DCI85HD KD
3 Initial installation
If the Receiver is plugged in and turned on for the first time, the installation wizard starts.
1. Turn on your TV. If your TV does not automatically recognize the connected and powered Receiver,
select the AV source to your TV (HDMI ®, analog or SCART AUDIO / VIDEO connector), on which the
TV is currently connected to the Receiver.
2. Open the cover of the smartcard reader on the front of the
Receiver. Slide the smartcard into the card slot. The
smartcard must be inserted with the chip facing down.
3.1 Preparation: Device checks the device
settings
The following tests are performed by the installation wizard automatically. Your intervention is not required
normally.
The Receiver searches for the cable signal. If no signal is detected, make sure that the antenna cable is
properly connected. If the test has been interrupted, press on your remote control to proceed with the
installation.
If the Receiver does not find a signal, contact the customer service of Kabel Deutschland.
The Receiver verifies that you have inserted the smartcard into the device. You received a smartcard from
Kabel Deutschland, insert it into the smartcard reader. The smartcard must be inserted with the gold chip
facing down. If you do not have the smartcard at hand, press on the remote control to continue the
installation without smartcard. Until you use the smartcard, you can only use free channels.
The Receiver automatically searches the cable network for new and improved software for your Receiver.
If new software is available, the Receiver downloads it and reboots.
3.2 Language settings
The default language for the operation of your Receiver is
German. If you want to set a different language, press
on the remote control. You can choose between the languages
German, English, Turkish and Russian. Use the keys to select
a language and confirm your selection by pressing .
Note
The assignment of the button on your remote changes depending on
the steps you perform. During installation, the current function assignment of
the button always appears at the bottom right on your television
screen.

18
DCI85HD KD
3.3 The five steps of the installation wizard
In five steps, the installation wizard will guide you through the installation. Please follow the instructions
on the screen carefully. If necessary, react with your remote control. Simply use the keys around the
button and then confirm your selection by pressing .
3.3.1 Step 1: Channel search
The Receiver automatically checks the cable for TV and radio channels and stores them in places 101 to
999.
After the completion of the channel search, the total number
of TV and radio channels is displayed in the installation
screen. Exit the channel search by pressing .
3.3.2 Step 2: Set up favorite channels
The channel search normally finds several hundred channels.
You can now set up your favorite channels and their place in
the list of favorite channels. Places 1 to 100 are reserved for
your favorites. To begin, press .
1. The list of TV channels is displayed. Now proceed by pressing the keys , or the P+ / P- button on
your remote control to browse through the channel list and select which channel you want to add to your
favorites list. If you want to add a channel to your favorites list, press while the yellow marker is on
the name of the channel. The selection is indicated by a green check mark next to the channel name.
2. If your list is complete, press on the remote control. A window appears in which you are prompted to
confirm your selection. By pressing you store your entire favorite list.
3. To change the order of the channels in your favorites list, move down with the arrow key to the entry
Rearrange. Your favorites are displayed. Do you want to move a channel in the favorites list, press
while the yellow marker is on the program‘s name. Now the program can be moved using the keys
,.
4. To complete sorting, press the arrow button . Confirm the selected order of your favorites list by
pressing .
Note
If you do not want to create a list now, skip this menu. You can later press
on your remote to enter the main menu. Then select Settings first,
then Favorites (see chapter 7.5, Favorites). By choosing Add the list of TV
channels is displayed. You can now create your favorites list as described.
Without a favorites list the positions 1 to 100 remain unassigned.