saii iTrack Motion User manual

Saii iTrack Motion Bluetooth Tracker
USER GUIDE

Get to know your new device:
1. Strap hole
2. Button (for pairing with phone, wake up the iTrack device and camera
remote)
3. Notch for easier battery removal
4. LED light
1

INSTALLATION
STEP 1:
Please download the “iTrackEasy” app from the Google Play or the AppStore. You
can also scan the QR code to download the app.
STEP 2:
Turn on Bluetooth on your smartphone. Please make sure your Bluetooth is visible
for other devices.
2

STEP 3:
Sign up as new user - start the iTrackEasy app on your device and tap the “Sign up”
button on the screen.
STEP 4:
Pair your smartphone with the iTrack Motion:
● Make sure Bluetooth on your smartphone is on
● Hold the Saii iTrack motion close to your smartphone
● Hold the button on the iTrack device until you hear a beep and the LED starts
flashing
3

Motion Alert
When the this option is on, both tracker and smartphone will beep, when the
tracker is moved. To avoid the continuous disturb, the alarm will alert you once every
90 seconds. The app gives you the possibility to access the recent motion history.
Find your Saii iTrack / Find your phone
When iTrack is connected to your phone, hold the iTrack button and your
phone will sound alert. This also works vice-versa - when open the iTrack App and
tap the “Ring” icon on the App, the iTrack device will beep and LED will flash.
4

Camera Remote
The Saii iTrack Motion doubles as a camera remote. When your smartphone
and iTrack device are paired, you can use it to record perfect selfies or group photos
by simple press of a button.
Mark as Lost / Last Seen Location
If your Saii iTrack Motion keyfinder is lost, you can see it’s last disconnected
location on the map. Also, you need to select "mark as lost" option in the app, and
the device will broadcast the Beacon signal. When other user passes by and scans
the Beacon signal, the GPS location will be sent to you.
5

Battery Replacement
When the battery replacement is needed, please follow these three simple steps:
1. Open the iTrack Motion using the notch on the side
2. Replace the old battery with the new one CR2032 button battery
3. Put the cover back, and then press the button to reconnect the iTrack
with your smartphone.
Safety Notes
Keep the batteries out of the reach of pets and children. If swallowed, seek for
medical assistance immediately.
Do not expose batteries to water or fire. Do not attempt to charge not-rechargeable
batteries. The batteries may explode.
Do not immerse the device in water to avoid damage.
Disposal
The packaging is made of eco-friendly, recyclable material. Please ask your local
authorities about appropriate methods of disposal.
Defective or empty batteries must be recycled in accordance with Directive
2006/66/EC. Please dispose batteries in the designated collection facility. Batteries
contain toxic substances that must be treated separately from domestic waste.
6

Troubleshooting
ISSUE
CAUSE
SOLUTION
I’m asked to enter the PIN
when I try to pair the
device with my phone
You’re trying to pair the
device with the
smartphone via Bluetooth
settings on your phone
Pair the iTrack with your
smartphone using the
iTrackEasy app (press “+”
at the top right corner)
I can’t pair iTrack with my
phone
1. Bluetooth is off
2. iTrack is too far
from the phone
3. iTrack’s battery is
empty
1. Turn on the
Bluetooth
2. Place iTrack close
to your phone and
hold it like that unti
you here a beep.
3. Replace the
existing battery
with the new one
The battery lasts only for
a few days
iTrack’s control module is
faulty
Replace the battery
iTrack’s location doesn’t
appear on the map
GPS is turned off or the
iTrackEasy app cannot
access the GPS
Turn on the GPS and
make sure the iTrackEasy
app can access it
My phone’s battery drains
too fast
This is the rare issue that
occur only on some
phones, and it’s
connected with the power
consumption of the GPS
module
Activate the GPS only
when you actually need it
(i.e. when you’re looking
for your iTrack device)
7