Samson SRK8 User manual
SRK8
SRK12
SRK16
SRK21
STEEL
CONSTRUCTED
EQUIPMENT
RACKS
INSTALLATION
GUIDE
SAMSON
®
A U D I 0
Introduction and Features
Congratulations
on
your purchase
of
the
SRK
series
equipment
rack from Samson
Audio. Samson
SRK
racks are made
of
solid steel construction and feature fully
enclosed steel side panels.They are available in
four
sizes;
8-space, 12-space,
16
-
space and 21-space.The
SRK
racks are set
upon
4 heavy-duty, 3-inch (
75
mm) cast-
ers
with
locking fronts.
Each
rack includes afree one-space, blank panel beauti-
fully appointed
with
the
Samson Logo and enough racks screws
to
get
you
going
.
The truly innovated
thing
is
that
the
unique
steel pillar support bar construction,
allow
the
racks
to
be
assembled
to
accept either
the
European
or
US
thread
size
.
Whether you are
building
an
equipment
rack in afixed installation
or
in
a
commer
-
cial
or
home
studio, the
SRK
racks will provide solid
support
for your valuable gear.
Following are some
of
the
main features:
SRK
Equipment
Rack Features
• 19-inch
Equipment
Rack
•
8,
12, 16&
21
rack spaces
• Heavy
duty
steel
construction
with
fully
enclosed sides
• 3-inch
(75mm)
locking
casters
• Can
be
assembled
to
accept
either
US
or
European threads.
• BlackTextured
painted
finish
• A single rack space
blank
panel
included
•
US
and
European rack screws
included
SRK
SERIES
ASSEMBLY
..
'
....
--
·.
..
-
..
-. .
.. -
:-.;,,
•,,-·=
--
~,_]
~·
..._,--
I
,.-
I
..
-
..
-
\
--
SRK
Assembly Instructions
1.TOP
PLATE
2.SIDE
PLATE
3.FRONT
PILLAR
4.BACK
PILLAR
5.BASE
PLATE
6.WHEEL
7
.CROSS-SCREW
8.BACK
PLATE
(1
PCS
}
(2PCS
)
(2PCS
)
(2PCS
)
(1
PCS
}
(4PCS
)
(36PCS
)
(1
PCS
)
1 First, determine
if
you are setting up the rack for
US
or
European threads.
Each
of
the pil-
lars
has
the
US
thread on one side and the European thread on
the
other.The
US
threads
are indicated
by
the
knockout hole.
So
,
if
you want
to
configure the rack for
US
threads be
sure that all
the
knockout holes
are
facing outward.
If
you want to configure
the
rack for
European threads be sure that all
the
knockout holes are facing inward.
2 With the base plate
(#5)
flat on
the
ground, using the small black screws, screw (3 screws)
one
of
the side plates (
#2)
in
so
that the inner ridge
is
sitting flat on
the
base
plate.
3 On either side
of
the
side plate screw
(2
screws per pillar) in
the
2 pillars (
#3
& #4)
with
th
e
inner ridge sitting flat on
the
base
plate, for American thread
the
side
with
the
knockout
should be facing out.
4 On
the
SRK16
and
SRK21
the 2 pillarswill be screwed i
nto
the side plate.
5 Repeat for the other side
of
the
rack.
6
Place
the
top
plate
(#1
) over
the
sides
of
the rack,
so
that the 4 pillarsand side plate
fit
inside the
top
plate and fasten the
18
screws.
7 Screw the Samson back plate (
#8
) in
with
either the American 10/
32
si
lver screws, or the
Euro
M6
black chrome screws.
Samson Technologies Corp.
575 Underhill Blvd.
P.O. Box 9031
Syosset, NY 11791-9031
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 516-364-3888
www.samsontech.com
PRO
PRODUCT SPECIFICATION SHEET
ACCESSORIES
TYPE:
RACKS
PRODUCT DESCRIPTION
SRK EQUIPMENT RACKS
SERIES CATEGORY
SRK ACCESSORIES
GENERAL DESCRIPTION
Heavy duty equipment racks in several sizes. Coolest
feature: Works for both U.S. and E.U. rack screws.
FEATURES
> 19-inch equipment racks
> 8, 12, 16 and 21 rack space versions
> Heavy-duty steel construction with fully enclosed sides
> 3-inch (75mm) locking casters
> Single space blank panel included
> U.S. and European rack screws included
ARCHITECT’S & ENGINEER’S SPECIFICATIONS
The Samson SRK racks shall be 19 inch standard
equipment racks. They shall be available in 8 space,
12 space, 16 space, and 21 space configurations. They
shall be of sturdy steel construction. They shall have
heavy-duty 3 inch casters. The front casters shall be of
the locking type. They shall come with a blank 1 space
rack panel. They shall accommodate both European
standard and US standard rack screws. European and
US standard rack screws shall be included.
SPECIFICATIONS
SRK8
Type ............................................... 8 space,
19” equipment rack
SRK12
Type ............................................... 12 space,
19” equipment rack
SRK16
Type ............................................... 16 space,
19” equipment rack
SRK21
Type ............................................... 21 space,
19” equipment rack
Dimensions:
(All) Heavy duty steel construction, fully enclosed sides, 3-inch
(75mm) locking castors, US and European threads and rack
screws, single space blank panel included
©2006 Samson v1.0 5/06
This manual suits for next models
3
Table of contents
