Samsung LN40C610N1F User manual

2010 Samsung TV
F/W Upgrade Guide
Samsung Electronics

Model List
LCD
6 series :
LN40C610N1F, LN40C630K1F, LN46C600F3F, LN46C610N1F,
LN46C630K1F, LN55C610N1F, LN55C630K1F, LN60C630K1F

Step1. How to prepare the USB Memory Drive
2. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file onto the USB Memory Drive.
3. Go to the USB Memory Drive and then double click the file.
1. Save the firmware file onto your computer.
File Name : T-VAL5AUSC and T-MSX6AUSC.exe
4. Click on the “Unzip” button. 5. Unzipping is in progress.
6. After completing, click on the
“OK” and “Close” buttons.
7. A folder containing the firmware files
has been added to the USB memory drive
Folder Name: T-VAL5AUSC and
T-MSX6AUSC
8. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
“Safely Remove”.
OK

[Step 1] Turn the TV on
[Step 2] Insert the USB Memory Drive
containing the Software into the USB port
on the side (or rear) of the TV
Step2. How to upgrade the firmware
[Step 3] Press the MENU button to display
the menu. Press the ▲or ▼button
to select “Support”, then press the
ENTER button
[Step 4] Press the ▲or ▼button to select
“Software Upgrade”, then press the
ENTER button
[Step 5] The message “Scanning for USB.
It may take up to 30 seconds”
is displayed.
[Step 6] Then, the message “Upgrade
Version XXXX to version XXXX?
The system will be reset after
upgrade.” is displayed.
Select “Yes”, then press the ENTER
button.
And then software is upgraded
automatically.
[Step 7] When the Software upgrade
is complete; the TV will turn off and
then back on by itself.