Samsung LN46A850S1F User manual

English-1
1-800-SAMSUNG (7267864)
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Call center hours of operation (Mon-Sun 9AM-12AM EST).
To register this product please visit
www.samsung.com/global/register.
LN46A850S1F/LN52A850S1F
LN46A860S2F/LN52A860S2F
Rear Panel / Side Panel Jacks (depending on the model)
HDMI IN4 HDMI IN4
1AUDIO OUT
2DIGITAL AUDIO OUT (OPTICAL)
3PC IN [PC] / [AUDIO]
4HDMI IN 1, 2, 3, 4 /
DVI IN(HDMI2)[R-AUDIO-L]
5ANT IN
6WISELINK
7AV IN 2
8HEADPHONE
9POWER INPUT
0S-VIDEO
!COMPONENT IN 1, 2 / AV IN 1
@LAN
#EX-LINK
$KENSINGTON LOCK
Audio Output Performance Comparison
OPTICAL (Digital)
AUDIO (Analog)
Best
Normal
Video Input Performance Comparison
HDMI/DVI
PC/COMPONENT
S-VIDEO
VIDEO
Best
Better
Good
Normal
/
/
Quick Setup Guide
STOP
Please do not return
this unit
If you are having problems operating
this TV,
Please call;
1-800-SAMSUNG (1-800-726-7864)
For web support please visit
www.samsung.com/support
[LN46A850S1F/LN52A850S1F] [LN46A860S2F/LN52A860S2F]
BN68-01692A-Eng.indd 1 2008-07-18 �� 10:06:41

English-2
Remote Control
See “Remote Control” in the owner’s instructions for details.
1 POWER
Turns the TV on and off.
2 TV
Selects the TV mode directly.
3 NUMERIC BUTTONS
Press to directly select the
channel.
4
Press to select additional
channels (digital and analog)
being broadcast by the same
station. For example, to select
channel “54-3”, press “54”, then
press “ ” and “3”.
5 (MUTE)
Press to temporarily cut off the
sound.
6 VOL – / VOL +
Press to increase or decrease
the volume.
7 CH LIST
Used to display Channel Lists on
the screen.
8 TOOLS
Use to quickly select frequently
used functions.
9 INFO
Press to display information on
the TV screen.
0 COLOR BUTTONS
Use these buttons in the Channel
list, WISELINK, etc.
! CC
Controls the caption decoder.
@ E.MODE
Press to select the preset display
and sound modes for sports,
cinema and games.
# Use these buttons in the DMA,
WISELINK and Anynet+modes.
( : This remote can be
used to control recording on
Samsung recorders with the
Anynet+feature)
$ SET
Sets the remote to control your
TV, VCR, DVD or Set-Top Box
% MODE
Press to operate your TV, DVD,
STB or VCR.
^
TV
SET RESET
VCR DVD STB
ON/OFF
Press to backlight the buttons
on the remote. This function is
convenient for using at night or
when the room is dark. (Using
the remote control with the
TV
SET RESET
VCR DVD STB
ON/OFF light button set to On
will reduce the battery usage
time.)
& PRE-CH
Tunes to the previous channel.
* CH / CH
Press to change channels.
( SOURCE
Press to display and select the
available video sources.
) W.LINK (WISELINK)
This function enables you to view
and play photo and music files
from an external device.
a MENU
Displays the main on-screen
menu.
b RETURN
Returns to the previous menu.
c  UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER
Press the Up/Down/Left/Right
sections of the wheel button and
Enter to select on-screen menu
items and change menu values.
You can navigate up and down
the menu, switch channels and
adjust the volume by turning the
wheel button.
d EXIT
Press to exit the menu.
e DMA (Digital Media Adapter)
Use this when connecting a
SAMSUNG DMA device through
an HDMI interface and switching
to DMA mode.
For more information on the
operating procedures, refer to the
user manual of the DMA.
This button is available when
“Anynet+(HDMI-CEC)” is “On”.
f INFO.L
Press to use the News, Stock
Market and Weather Forecast
information services available
over Samsung’s network.
g FAV.CH
Press to switch to your favorite
channels.
h CONTENT
This function enables you to view
“Content Library”.
i RESET
When your remote does not
work, change the batteries and
press the RESET button for 2-3
seconds before use.
%
1
2
3
4
5
6
7
8
9
0
!
@
#
$
^
&
*
(
)
a
b
c
d
e
f
g
h
i
TV
SET RESET
VCR DVD STB
BN68-01692A-Eng.indd 2 2008-07-18 �� 10:06:42

English-3
or
Connecting a DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box) via DVI
TV Rear Panel
1
DVI to HDMI Cable (Not supplied)
2Audio Cable (Not supplied)
1
Connect a DVI to HDMI Cable or
DVI-HDMI Adapter between the
HDMI IN 2 jack on the TV and the
DVI jack on the DVD/Blu-Ray player
or Cable Box/Satellite receiver (Set-
Top Box).
2
Connect Audio Cables between the
DVI IN (HDMI 2) [R-AUDIO-L] jack on
the TV and the DVD/Blu-Ray player or
Cable Box/Satellite receiver (Set-Top
Box).
Connecting a DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box) via HDMI
1
What is HDMI?
• HDMI(High-Definition Multimedia
Interface), is an interface that enables the
transmission of digital audio and video
signals using a single cable.
• The difference between HDMI and DVI
is that the HDMI device is smaller in
size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature
installed. DVI also requires a separate
audio connection (see below).
Connect an HDMI Cable between
the HDMI IN (1, 2, 3 or 4) jack
on the TV and the HDMI jack on
the DVD/Blu-Ray player or Cable
Box/Satellite receiver (Set-Top
Box).
DVD/Blu-Ray player or Cable Box/
Satellite receiver (Set-Top Box)
Each DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection
terminal to the cable.
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
➣
➣
➣
HDMI IN4
Each DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.
The TV may not output sound and pictures may be displayed with abnormal color when DVD/Blu-Ray players/Cable Boxes/
Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there
is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on
the back of the TV. If this happens, contact the company that provided the DVD/Blu-Ray player/Cable Box/Satellite receiver to
confirm the HDMI version, then request an upgrade.
HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
➣
➣
➣
TV Rear Panel
TV Side Panel
HDMI Cable (Not supplied)
1
DVD/Blu-Ray player or Cable Box/
Satellite receiver (Set-Top Box)
BN68-01692A-Eng.indd 3 2008-07-18 �� 10:06:45

English-4
Connecting a DVD/Blu-Ray player or Cable Box/Satellite receiver
(Set-Top Box) via Component cables
TV Rear Panel
1Component Cable
(Not supplied)
DVD/Blu-Ray player or Cable Box /
Satellite receiver (Set-Top Box)
2Audio Cable (Not supplied)
1
Connect a Component Cable between
the COMPONENT IN (1 or 2)
[Y, P B , P R ] jacks on the TV and the
COMPONENT [Y, P B , P R ] jacks on
the DVD/Blu-Ray player or Cable Box/
Satellite receiver (Set-Top Box).
2
Connect Audio Cables between the
COMPONENT IN(1 or 2) [R-AUDIO-L]
jacks on the TV and the AUDIO OUT
jacks on the DVD/Blu-Ray player or
Cable Box/Satellite receiver (Set-Top
Box).
Component video separates the video
into Y (Luminance (brightness)), Pb
(Blue) and Pr (Red) for enhanced video
quality. Be sure to match the component
video and audio connections.
For example, if connecting a Component
video cable to COMPONENT IN 1,
connect the audio cable to
COMPONENT IN 1 also.
Each DVD/Blu-Ray player or Cable Box/
Satellite receiver (Set-Top Box) has a
different back panel configuration.
When connecting a DVD/Blu-Ray player
or Cable Box/Satellite receiver (Set-Top
Box), match the color of the connection
terminal to the cable.
➣
➣
➣
Connecting a Camcorder
1
Connect a Video Cable between
the AV IN 2 [VIDEO] jack on the TV
and the VIDEO OUT jack on the
camcorder.
2
Connect Audio Cables between the
AV IN 2 [R-AUDIO-L] jacks on the
TV and the AUDIO OUT jacks on the
camcorder.
Each Camcorder has a different back
panel configuration.
When connecting a Camcorder, match
the color of the connection terminal to
the cable.
➣
➣
HDMI IN4
HDMI IN4
Camcoder
TV Side Panel
2
Audio cable (Not supplied)
Video Cable (Not supplied)
1
BN68-01692A-Eng.indd 4 2008-07-18 �� 10:06:46

English-5
Connecting a VCR
1
2
3
4
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
When connecting to AV NI 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable
(Yellow).
If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of
the TV. Alternatively, connect the cable to the “R” jack. If your VCR is stereo, you must connect two cables.
➣
➣
➣
➣
HDMI IN4
HDMI IN4
TV Rear Panel
3RF Cable
(Not supplied)
5Audio Cable
(Not supplied)
VCR Rear Panel
4
Video Cable
(Not supplied)
5
Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
Connect an RF Cable between
the ANT OUT terminal on the
VCR and the ANT IN terminal
on the TV.
Connect a Video Cable
between the VIDEO OUT jack
on the VCR and the AV IN 1
[Y/VIDEO] or AV IN 2 [VIDEO]
jack on the TV.
Unplug the cable or antenna
from the back of the TV.
Connect Audio Cables between
the AUDIO OUT jacks on the
VCR and the AV IN 1 (or AV IN 2)
[R-AUDIO-L] jacks on the TV.
Video Connection
S-Video Connection
TV Rear Panel
3
Audio Cable
(Not supplied)
1RF Cable
(Not supplied)
VCR Rear Panel
1
2
Connect an S-Video Cable
between the S-VIDEO OUT jack
on the VCR and the [S-VIDEO]
jack on the TV.
3
Connect Audio Cables between
the AUDIO OUT jacks on the VCR
and the AV IN 1 [R-AUDIO-L]
jacks on the TV.
To begin, follow steps 1–3 in the
previous section to connect the
antenna or cable to your VCR
and your TV.
An S-Video cable may be included
with a VCR. (If not, check your local
electronics store.)
Each VCR has a different back
panel configuration.
When connecting a VCR, match
the color of the connection
terminal to the cable.
➣
➣
2
S-Video Cable
(Not supplied)
TV Side Panel
BN68-01692A-Eng.indd 5 2008-07-18 �� 10:06:48