Samsung LW32A33W Quick start guide

English-1
Viewing the Connection Panel
Whenever you connect an audio or video system to your set, ensure that all elements are
switched off.
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting Set-Top Box, VCR or DVD
- onnect the V R or DVD S ART cable to the S ART connector of the V R or DVD.
- If you wish to connect both the Set-Top Box and V R (or DVD), you should connect the Set-Top Box
to the V R (or DVD) and connect the V R (or DVD) to your set.
Input Output Specification
Power Input
1
2
Connector
S ART 1
S ART 2
Video Audio (L/R) S-Video R B Video+Audio (L/R)
✔✔ ✔ Only TV Out
✔✔ Monitor Out
(TV/Ext.1/Ext.2/AV3/S-VHS)
Input Output
BN68-00653C-00Eng 4/6/04 9:16 PM Page 5

English-2
Viewing the Connection Panel
Connecting External A V Devices
- onnect R A or S-VIDEO cable to an appropriate external A/V device such as V R, DVD or amcorder.
- onnect R A audio cables to “
AUDIO(L) ” and “ AUDIO(R) ” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output ( ) on the rear of your set. While the headphone
is connected, the sound from the built-in speakers will be disabled.
Connecting Component Devices (DTV DVD)
- onnect component video cables to component connector (“Y”,“PB”,“PR”) on the rear of your set and the
other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the
DTV (or DVD) and connect the DTV (or DVD) to component connector
(“Y”,“PB”,“PR”) on your set.
- The Y, Pb and Pr connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and
R-Y or Y, b and r.
- onnect R A audio cables to “
AUDIO(L) ” and “ AUDIO(R) ” on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
5
Source Video Horizontal Frequency Vertical Frequency Resolution
(kHz) (Hz) (Lines)
Source PAL 15.625 50 575
SE AM 15.625 50 575
NTS 4.43 15.734 60 483
NTS 3.58 (Except RF) 15.704 60 483
Component 480/60i 15.734 60 483
480/60p 31.469 60 483
576/50i 15.625 50 576
576/50p 31.250 50 576
720/60p 45.000 60 720
1080/50i 28.125 50 1080
1080/60i 33.750 60 1080
3
4
BN68-00653C-00Eng 4/6/04 9:16 PM Page 6

English-3
Viewing the Connection Panel
Connecting Computer
- onnect the D- Sub cable to “PC (PC IN)” on the rear of your set.
- onnect the stereo audio cable to “AUDIO (PC IN)” on the rear of your set and the other end to
“Audio Out” of the sound card on your computer.
Connecting DVI
- onnect the DVI connector to the DVD connector.
- onnect the stereo audio cable to “L - Audio - R” on the rear of your set and the other end to
“Audio Out” of the sound card on your DVD.
- DVI dose not support P function.
Connecting Sub Woofer
Connecting HDMI (High-Definition Multimedia Interface)
Supports connections between HDMI-connection-enabled AV devices (set top boxes, DVD players, AV
receivers and digital TVs).
What is HDMI?
- HDMI , or high-definition multimedia interface, is a next-generation interface that enables the
transmission of digital audio and video signals using a single cable without compression.
-“
Multimedia interface ” is a more accurate name for it especially because it allows multiple channels of
digital audio (5.1 channels).The difference between
HDMI and DVI is that the HDMI device is smaller
in size, has the
HDCP coding feature installed, and supports multi - channel digital audio.
6
7
8
9
BN68-00653C-00Eng 4/6/04 9:16 PM Page 7

English-4
Installing Stand
EXT 1(RGB)EXT 1(AV)
DVI IN
HDMI IN
AV IN 3
L - AUDIO - R
SERVI PORT
OMPONENT IN
EXT 1(RGB)EXT 1(AV)
DVI IN
HDMI IN
AV IN 3
L - AUDIO - R
SERVI PORT
OMPONENT IN
<1> <2>
1. Lower the TV set in the direction of the arrow and fix the stand.
2. Use the four screws to tightly fix the stand.
Maintenance of Your LCD TV
WARNIN : To avoid risk of electric shock, do not disassemble the TV cabinet.
Users cannot service the TV. User maintenance is restricted to cleaning as explained below:
Unplug the LCD TV from the power outlet before cleaning.
• To clean your flat panel display screen, lightly dampen a soft, clean cloth with water or mild detergent.
If possible, use a special screen cleaning tissue or solution suitable for the antistatic coating.
• To clean the L D TV cabinet, use a cloth lightly dampened with a mild detergent.
• Never use flammable cleaning material to clean your L D TV or any other electrical apparatus.
BN68-00653C-00Eng 4/6/04 9:18 PM Page 54

English-5
Using the Anti-Theft Kensington Lock
1. Insert the locking device into the Kensington slot on the L D TV (Figure 1), and turn it in the locking direction
(Figure 2).
2. onnect the Kensington lock cable.
3. Fix the Kensington lock to a desk or a heavy stationary object.
EXT 1(RGB) EXT 1(AV)
DVI IN
HDMI IN
AV IN 3
L - AUDIO - R
SERVI PORT
OMPONENT IN
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may differ
from the illustration depending on the manufacturer. Please refer to the manual provided with the
Kensington lock for proper use.
Figure 2
Figure 1
able
<Optional>
BN68-00653C-00Eng 4/6/04 9:18 PM Page 55

English-6
How to install the wall Bracket
Wall Mount Installation Guide
1. This Wall Mount is designed for Samsung’s 32” LCD TV models.
2. Have a Samsung dealer install the Wall Mount.
3. Two or more people are required for installation.
4. Samsung is not responsible for any product damage or any injury
caused by installation at the customer’s discretion.
Parts
How to Assemble the Wall Mount
For wall mount installation, only the components and parts provided should be used.
1.Wall Mount Set is provided in individual parts, assembly is required for further installation.
Assemble the Wall Mount Bracket and Hinges as illustrated in the direction of arrows, and
secure the Captive Screws.
Secure the Wall Mount Bracket on the wall after securing the screws.
2. Assemble the Side Brackets and
Support Bars as illustrated, and
secure the screws. (12 screws (2) are
provided. For the safety, be sure to
secure all 12 screws.)
Wall Mount Bracket Side Hinges Side Brackets
Left Right Left Right
Support Bars
Hangers : 4 EA
Screws1 : 4 EA
Screws2 : 12 EA
Screws3 : 4 EA
Screws
3.Assemble the screws (1) and the Hanger Holders
as illustrated.
4.Firmly secure the Hanger Holders
(that is completed at step 3) onto the
rear of the Wall Mount Bracket.
BN68-00653C-00Eng 4/9/04 7:44 PM Page 56

English-7
How to install the wall Bracket
How to Secure the LCD TV to the Wall Mount
How to Adjust the Angle of the Wall Mount
1.Attach the assembled left/right Side Brackets onto the
rear side of the TV set and secure the screws(3).
1.Hold onto the topside of the TV set and pull it in
direction of arrows to adjust the angle. Hold onto the
middle of the TV’s topside for the angle adjustment.
2.The angle can be adjusted by 0 ~ 20°.
2. Insert 4 Hangers into the grooves of the Wall Mount Bracket
and then push the Hangers downwards to mount the TV set
firmly. Be sure that the Hangers are firmly fixed onto the Wall
Mount Bracket after mounting the TV set.
Before the installation of the Wall Mount Bracket onto the wall, adjust the angle to 0°.
Installation Dimensions
BN68-00653C-00Eng 4/9/04 7:44 PM Page 57