Samsung SP54R1HL1X/SHI User manual

PROJECTION TV RECEIVER
Chassis : J60B(P)_OMEGA-2
Model : SP54R1HL1X/SHI
PROJECTION TV RECEIVER CONTENTS
1.
2.
3.
4.
5.
6.
Specifications
Alignment and Adjustments
Exploded View and Parts List
Electric Parts List
PCB Diagram
Schematic Diagram
SERVICE Manual

This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
©Samsung Electronics Co., Ltd. Aug.2005
Printed in Korea
AA82-02790A
ELECTRONICS

Specifications
Samsung Electronics 1-1
1. Specifications
1-1 EUROPE/CIS

Specifications
1-2 Samsung Electronics
1-2 MIDDLE-ASIA

Specifications
Samsung Electronics 1-3
1-3 CHINA

Specifications
1-4 Samsung Electronics
1-4 EAST-ASIA

Alignment andAdjustments
Samsung Electronics 2-1
2. Alignment and Adjustments
2-1 When entering the service mode;
1. Turn on the TV, and then select “DYNAMIC” on the picture adjustment mode.
2. Turn off the TV(STAND-BY).
3. Enter the service mode by pressing the remote control keys in the following sequence:
POWER OFF →INFO →MENU →MUTE →POWER ON
Note : If necessary, re-do steps 1~3.
Initial display when the service mode is switched.
2-1-1 WHEN A RF SIGNAL IS RECEIVED
[Europe/cis] [Middle-Asia]
[China]/[East-Asia]
DEFLECTION
Def. 480P
Def. 1080I
Def. 576P
VIDEOADJUST 1
VIDEOADJUST 2
VIDEOADJUST 3
VIDEOADJUST 4
YC DELAY
OPTION (83h 05h)
CHECK SUM 0000
RESET
T-OM2PEU - 0000 YY.DD.MM
DEFLECTION
Def. 480P
Def. 1080I
Def. 576P
VIDEOADJUST 1
VIDEOADJUST 2
VIDEOADJUST 3
VIDEOADJUST 4
YC DELAY
OPTION (59 5C 18)
CHECK SUM 0000
RESET
T-OM2PMA - 0000 YY.DD.MM
DEFLECTION
480 offset
1080i offset
576p 50Hz
Covergence NR
VIDEOADJUST 1
VIDEOADJUST 1 1080i
VIDEOADJUST 2
VIDEOADJUST 3
VIDEOADJUST 4
OPTION (DE 0D 18)
YC DELAY
CHECK SUM 0000
RESET
T-OM2PCH - 0000 YY.DD.MM

Alignment andAdjustments
2-2 Samsung Electronics
2-1-2 SERVICE MODE CONTROL KEYS
■
■PRECAUTIONS
1. When EEPROM IC (IC902) is replaced, first connect the power cord and wait for about 4~5 seconds.
2. After replacing EEPROM IC (IC902), enter the Service mode. Next, enter the standard data or the
previous EEPROM IC data before replacement. And then check and adjust any items related to Geometric, Picture, Option.
MAIN MENU
UP / DOWN
RIGHT / LEFT
MENU DISPLAY
Select item by moving cursor
Decrease or increase the adjustment values

Alignment andAdjustments
Samsung Electronics 2-3
2-2 FACTORY MODE MENU(EUROPE/CIS/MIDDLE-ASIA)
2-2-1 DEFLECTION (EUROPE/CIS)

Alignment andAdjustments
2-4 Samsung Electronics
2-2-2 DEFLECTION (Middle-Asia)