Sanan SA-1844P User manual

Ultra Wide Dynamic Camera
User's Manual
(IR Waterproof)

SA series Ultra
1.Overview
WDR cameras are new, CCTV cameras which adopt Pixim's
innovative “SEAWOLF”image sensor chip based on Digital Pixel System ®
technology. The resolution is up to 690TVL-E and the industry-leading wide
dynamic range is up to 120dB. This WDR ensures brilliant image quality under any
lighting environment. The image and color quality is also excellent in low
illumination environments. This camera series is a ultra wide dynamic range camera
in the real sense using digital sampling which can't be paralleled by average wide
dynamic range cameras using older generation CCD imagers. The application of 3D
digital noise reduction technology ensures higher S/N, which efficientlyreduces the
digital storage and transmission data saving system cost. Fashionable and
professional exterior design and special all-in-one all directional bracket, makes
round-the-clock surveillance easyand convenient.
ACDB
2.Notice
1. Use theappropriate powersupply
The input powerwill be DC12V. Be sureto connect itto theappropriate power.
Wrong connectionmay cause malfunctionand/or damage tothe camera.
2. Do notattempt to disassemble the camera.
Toavoid electric shock, do not removescrews or camera housing. There areno
user serviceable partsinside. Ask a qualified service person for servicing.
3. Handle thecamera with care.
Do not abusethe camera.Avoid striking,shaking, etc. Thecamera could bedamaged
by improper handlingor storage.
4. Do note usestrong or abrasive detergents when cleaning the camera body.
Use a drycloth to clean the camera when it is dirty. In casethe dirt ishard to remove,
use a milddetergent and wipegently.
5.Do not attemptto aim the camera at thesun.
Do not attemptto aim the camera at thesun or other extremely bright objects that
cause smear toappear irrespective of whether the camerais operating or not. This
could damage the .DPS Sensor

3.Features
Ultra Wide Dynamic Range
The captured widedynamic range is 102dB typical and can reach 120dBmaximum.
OSD Menu*
Powerful OSD menuoperation function, allows for setting of various paramters and
pre-sets.
Comparison of Wide Dynamic Rangecamera and averagecamera
Average camerawith BLC off Average camerawith BLC on Ultra Wide DynamicRange camera
All directional bracket
All directional bracket,easy control.
Notice the function with * ,different type different function.
High Effective Resolution
Image resolution ashigh as 690TVL-E, offering enhanced horizontal and vertical
resolution useable inexisting as well as new CCTVsystems.
Lower Illumination Working Capability
0.1Lux low illumination(IR OFF)
Long-effective IR Light Source Design
IR Sensnsitivity
1yr 2yr 3yr 4yr Service Life
Other brands
3D Noise EliminatingTechnology
Adopts Pixim fullydigitalized 3D noise reduction technology to minimize noise,
extending DVR storageby 30%+.
Long-life IR LightSource Design
Adopts high performanceIR LED and heat
balance design, effectivelyextends the service
life of LED.
This camera adoptsinnovative DPS(Digital Pixel System) image sensor and image
processing technology.The sensor picksup details fromeach pixel based on
hundreds of samplesper video frame. vs CCD's limited exposures, to ensurewider
dynamic range thanis possible with analog CCD. Theimage quality is even
brilliant under extremelighting conditions.changeable lightingcondition.
SEAWOLF Image Sensor
*

120mm
80.0mm
9.0mm
1 Subpanle 2 Base
3 Dome Body 4 Video Line
5 Power Line 6 Base Screw Hole
1 Use screws tofix the bracketto the wall where camera shouldbe installed.
2 Loose horizontally adjustingscrews and verticallyadjustingscrews to adjust the
camera to anangle you need.Tighten the screws.
3 Use FOCUSor ZOOMButton to setthe focal length .
4 Use MENU buttonto change menusettings.
Dimensions (Unit: mm)
1 Sun Shade Cover 2 IR LEDS 3 Lens
4 Horizontally AdjustingScrews 5 VerticallyAdjusting Screws
6 Bracket Installing ScrewHole 7 Bracket 8 Menu Button
5.Dimentions (Unit: mm)
Camera Installation Camera Installation
4.Parts Instruction Parts Instructions
A
C
94.0mm
70.0mm
5.0mm
112233445566
66
88
1 Subpanel 2 Base
3 Dome Body 4 Video Line
5 Power Line 6 Zoom
7 Focus 8 Base Screw Hole
B
1 Please use the allen wrench in the accessory bag to loose the fixed screws in the subpanel.
2 Seperate the base from the subpanel.
3 Fix the base to the position you need with screws.
4 Then put the dome body and subpanelin place and tighten the screws.
5 Adjust Lens focal length(SW-515).
1122334455
77
11223344556677
VerticallyRotation 50
HorizontallyRotation 355
Menu Right
Left
Up
Down
88
ABC

1.Select the placewhere camera needsto be installed, use screws tofix bracket sub
panel.
2.Loose the horizontaland vertical screws, adjust the angle, then screw
down the screws.
Dimension(Unit: mm)
1 Sun Shade Cover 2 IR LEDs 3 Lens
4 VerticallyAdjusting Screw 5 Level AdjustmentCircle 6 Bracekt
Camera Installation
Parts Instructions
D
112233445566
Vertically Rotation180
D
165
70
66
81
Horizontally Rotation355 OSD Menu Setup
Menu button forchoice
Move UpAnd Down ByUp And Down Button
Move Horizontally OrModify Parameter By
Left AndRight Button
6. OSD Menu Operation
Menu Right
Left
Up
Down
ATW
MEDIUM
OFF
NORMAL
OFF
DC
AUTO
ENGLISH
DEFAULT
WDR CONTROL
BLC
WHITE BALANCE
LENS SELECT
D/N CONTROL
LANGAGE SELECT
AGC
FLUORESCENT
SAVE
(ATW/AWB)
(LOW/NORMAL/MEDIUM/HIGH)
(OFF/ON)
(LOW/NORMAL/HIGH)
(OFF/CRR/CRR2)
(MANUAL/DC)
(OFF/AUTO/GPIO)
(ENGLISH/CHINESE)
(CANCEL)
CAMERA SETUP
WD NROMAL
SAVE
PRESETS
PRE
WDR ZONE SELECT:
NORMAL METERPRESETS
WD NROMAL/SAFEAREA/ATM/LOW1/3
CANCEL
*Specialists press "Left,Right, Left, Right,Down" button entersuperior menu.

WDR Control:
Press Enter toshow the menu, move the cursorto WDR Control,set MEDIUM,
NORMAL, LOW, HIGH by left and rightbutton; choose the setting for WDRin
accordance with thelighting condition, set High in stronglighting contrast to realize
higher quality image.
WDR ZONE SELECT:WD NROMAL/SAFE AREA/ATM/LOW1/3.
BLC:
move to BLCby Up and Down button, set BLC by Leftand Right button: On and Off.
WHITE BALANCE:
Move to WhiteBalance by Upand Down button, set White balanceby Left and Right
button: AWB: Auto White Balance; ATW: AutoTracking White Balance. The color's
temperature are differentin different lightingcondition, The color'stemperature
changes in differentlighting condition, sothe white color in video image changes if
the lighting conditionchanges. AWB means camerascan compensate color
temperature automatically.In some specialenvironment, in order to keep the same
color temperature ,ATW setting cankeep a fixed color temperature
AGC:
Move cursor toAGC byUp and Down button, setAGC by Left and Right Button as :
NORMAL, LOW andHIGH. SettingAGC is better for cameras to work in wider
lighting range, ifthe illumination is low, can set AGChigh to risethe sensitivity of
cameras.
LENS SELECT:
Move cursor toLENS SELECT, set LENS SELECT by Rightand Left buttonas :
MANUAL,DC:DC Automatically. MANUALFOR MANUAL IRIS LENS, DC for
AUTO IRIS LENS.
FLUORESCENT:
Move cursor to FLUORESCENT by Up and Down button, set by Left and Rightbutton
as: OFF, CRR2: ColorRolling Restrain. Camerasoutput color roll ing image under
fluorescent lamp, CRRcan restrain colorrolling, keep the imagestable.
D/N Control:
Move cursor toD/N Control by Up and Downbutton, set D/N by Left and Right button
as: OFF;Auto;GPIO: External Control; On. The illumination is very low atnight,so
we need torise the sensitivityand improveimaging quality, then we can get better
image quality.Set D/N inaccordance with differentactual need.
SAVE&EXIT:
Move cursor toSAVE&EXIT by Upand Down button,set by Left and Right button
as :SAVE&EXIT;DEFAULT,CANCEL.
LANGAGE SELECT:
Move cursor toLANGAGE SELECT byUp and Downbutton, set by Left and Right
button as :ENGLISH;CHINESE.

D
C
B
A
Specifications
165( L)*81(H)*66(W)
228(L) * 182(H) *88(W)
7 Specifications
120( L)*80(H)
1000g
*Specifications subject to changewithout notice. SW-512 without menufunction;SW-515's menu functionis
optional)
3.6 or 6mm
94(L) * 70(H)
570g
Model
Sensor
Video Format
SYNC Mode
Resolution
S/N Ratio
Mini illumination
AGC
White
Balance
BLC
WDR control
Voltage
Current
Lens
Working Temperature
IR Range
Size
Weight
Mode
Range
1/3 DPS Sensor
PAL/NTSC
INTERNAL
690HTVL-E
normal, low, high
ON, OFF
medium, normal, low,high
DC12V
>50dB AGC OFF
Automatic Tracking WhiteBalance (ATW)
(Auto White Balance)2200~10000 K
-10 C ~50 C
D/N
OFF, External Control, Auto; ON
Sensor Menu Control Power
<250mA
30m
<350mA
0Lux ;(IR-ON )
4-9mm Auto iris
20m
500g
3.6 or 6mm
1200g
Model
Sensor
Video Format
SYNC Mode
Resolution
S/N Ratio
Mini illumination
AGC
White
Balance
BLC
WDR control
Voltage
Current
Lens
Working Temperature
IR Range
Size
Weight
Mode
Range
1/3 DPS Sensor
PAL/NTSC
INTERNAL
690HTVL-E
normal, low, high
ON, OFF
medium, normal, low,high
DC12V
>50dB AGC OFF
Automatic Tracking WhiteBalance (ATW)
(Auto White Balance)2200~10000 K
-10 C ~50 C
D/N
OFF, External Control, Auto; ON
Sensor Menu Control Power
<400mA
30m
<250mA
0Lux ;(IR-ON )
4-9mm Auto iris
40m
*Specifications subject to changewithout notice. SW-34 without menufunction)