Sanipex BAGNODESIGN TOKO 3 BDM-TOK-303-A Series User manual

BDM-TOK-303-A-XX
TOKO 3 HOLE BASIN MIXER
www.sanipexgroup.com

IMPORTANT PLEASE READ
 B 
 

 






 L  C 



 x 
           
          
 



    








 

 







Assemble the article according to pictures:
•drill the top according to the dimensions in figure 1
•insert the uprights with the supplied kits in the holes from below; insert the
gaskets from above and screw the basis; screw the kits to fix the uprights
(figure 2)
•screw the rings (with the threaded part up) and then insert the handles by
pressing them (figure 3)
•insert the pre-assembled spout, placing the gasket between top and spout
basis (figure 4)
•fix the spout with the supplied kit and connect the flexible hoses to the
spout (figure 5)
•connect the hoses to the uprights and connect the hot and cold water
supplies.

1 2
3
4
5

Note:

Note:

INM-TOK-303-A-XX-01-23
www.sanipexgroup.com