Saxby Lighting Sirio 73724 Manual

www.saxbylighting.com Saxby Lighting Ltd. BH23 3PE
Instruction leaflet
Sirio Surface Mount Kit
73724

Thank you for purchasing this accessory. Please read the instructions carefully before use to ensure safe and satisfactory
operation of this product. Please retain these instructions for future reference.
This surface mount kit is designed only for use with
Sirio fittings - 71708, 71710,73986. Please refer to the
installation instructions supplied with the fitting for wiring
and connection details.
• Checkyouhaveallpartsbelow:
- 4 x plastic plugs
- 4 x fixing screws
- 16 x small screws
- 4 x fixing brackets
- 4 x frames
•ReferringtoFig.1,assemblethreeoftheframes
together using the supplied brackets and small screws.
Ensure that the two frames with fixing holes are fixed
opposite each other and one frame without fixing holes
adjacent.
• Usingthepart-assembledframeasatemplate,mark
and drill the fixing holes. Take care not to damage any
concealed wiring or pipes.
• Fixthepart-assembledframetotheceilingusingthe
supplied fixing screws and plugs.
• ReferringtoFig.2,Connectthedriverasperthe
instruction manual supplied with the Sirio panels and
carefullyslidethepanelintothe3-sidedframe.Fixthe
fourth frame, without fixing holes in place with supplied
brackets and small screws.
• Replacefuseorcircuitbreakerandswitchon.Yourlight
is now ready for use.
Installation
Foryoursafety,alwaysswitchoffthesupplybeforecleaning.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
CheckwithyourLocalAuthorityorretailerforrecyclingadvice.
Recycling advice
Safety information
Iss.1 13042017
Fig.1
Fig. 2
www.saxbylighting.com Saxby Lighting. BH23 3PE