Sceptre CCR2000 User manual

1 | P a g e
Table of Contents
Table of Contents 1
Welcome 2
Package Contents 2
Installation 3
Basic Quick Functions 5
CCR2000 Features 6
Operation 7
While Under Video Mode Idle … 7
While Under Picture Mode Idle … 8
While Recording Video … 8
While Displaying Pictures… 9
While Playing Videos … 9
Picture Menu 10
Video Menu 11
Additonal Functions 12
Maintenance Troubleshooting Specifications 13
Troubleshooting Specifications 14
Specifications 16
FCC Information 18

2 | P a g e
Welcome
Dear Sceptre Customer,
Congratulations on your new SCEPTRE CCR2000 dashboard camcorder purchase. Thank you for your
support. To ensure safety and many years of trouble free operation of your camcorder, please read the
guide carefully before making any adjustments, and keep them in a safe place for future references. We
hope you enjoy your new SCEPTRE CCR2000. PLEASE CHARGE THE CCR2000 FOR 8 HOURS
BEFORE YOUR FIRST USE, THANK YOU.
The full manual is included digitally in the SD card. You can also download the full manual online
at http://www.sceptre.com.
For technical assistance, please call 1800-788-2878 and select option 3 or email our tech support
group at [e-mail].
For all other inquiries, please call 1800-788-2878 and select option 4 or email our customer service
group at [e-mail].
We recommend you register your SCEPTRE CCR2000 on the web at the address
http://www.sceptre.com/Support/Register.htm.
Package Contents
Sceptre CCR2000 Camcorder Device x 1
Power Cable x 1
12V Car Power Adapter x 1
SD Memory Card (with full user manual inside) x 1
Adjustable Windshield Mount x 1
Mini-USB data cable x 1
Battery (Pre-installed) x 1
Screw Driver x 1
Quick User Guide / Warranty Card
Cloth Pouch

3 | P a g e
Installation
a) Obtain the adjustable windshield mount and screw it into the CCR2000 camcorder.
Please Note:
The plastic secure clip needs to face the controls when tightened.
b) On the center uppermost portion of the interior of the windshield in a 5 inch square size
mount the CCR2000 by pressing the suction cup against the windshield. After the suction
cup is attached firmly to the windshield, clip the plastic secure clip to strengthen the suction
cup against the windshield.
Please Note:
The windshield should be clean and dry before installation.

4 | P a g e
c) Obtain the power cable and plug in the DC end into the CCR2000 camcorder. Plug in the
USB end into the 12V car power adapter. Plug the 12V car power adapter into your vehicle’s
12V power supply. When you start your car the CCR2000 will automatically power up and
start recording. Be sure to adjust your camera angle for better recording.

5 | P a g e
Basic Quick Functions
When you start your car, the camcorder will automatically power on and start recording at the
default setting of 1080P at 30 frames per second. Video files will be stored in 5 minute intervals.
When the memory is full the older files will be overwritten. You can retrieve the video files by
either connecting a mini-USB cable to the CCR2000 or removing the SD memory card and using
it with a card reader. Please note the default recording mode also records sound.
WHEN THE CAMCORDER IS RECORDING

6 | P a g e
CCR2000 Features

7 | P a g e
Operation
The Sceptre CCR2000 is a vehicle video recorder that can record video, audio, and take pictures. The
following are descriptions of CCR2000’s function buttons.
While Under Video Mode Idle …
1. UP –This button plays stored videos in the SD card recorded by the CCR2000.
2. DOWN –This button changes between PICTURE and VIDEO mode.
3. HOME –This button opens up the VIDEO MENU.
4. SELECT –This button starts or stops recording video.

8 | P a g e
While Under Picture Mode Idle …
1. UP –This button displays the pictures in the SD card taken by the CCR2000.
2. DOWN –This button changes between PICTURE and VIDEO mode.
3. HOME –This button opens up the PICTURE MENU.
4. SELECT –Press this button to takes a picture.
While Recording Video …
1. UP –This button enables or disables sound to be recorded in the video.
2. DOWN –This button takes a picture while the CCR2000 is recording video.
3. HOME –This button locks the current video file so it will not be overwritten.
4. SELECT –This button stops the CCR2000 from recording video.

9 | P a g e
While Displaying Pictures…
1. UP –This button selects the previous picture.
2. DOWN –This button selects the next picture.
3. HOME –This button exits to PICTURE MODE.
4. SELECT –This button starts or stops recording video.
While Playing Videos …
1. UP –This button selects the previous video. While playing the video this button slows down the
video playing speed.
2. DOWN –This button selects the next video. While playing the video this button speeds up the
video playing speed.
3. HOME –This button exits the video to VIDEO MODE.
4. SELECT –This button starts or stops playing the video.

10 | P a g e
Picture Menu
1. PICTURE
a. QUALITY –This option adjusts the compression of the JPEG picture.
b. SIZE –This option adjusts the resolution of the picture between 3 –8 megapixel.
c. CONTRAST –This option adjusts the contrast of the picture.
d. SHARPNESS –This option adjusts the sharpness of the picture.
e. ISO –This option adjusts the ISO value (the higher it is the brighter the picture but the
grainier the picture quality).
f. WHITE BALANCE –This option adjusts the white balance of the picture (changing it
between bluish to greenish).
g. EXPOSURE –This option adjusts exposure of the picture (changing it between dark and
bright). The higher the value the softer the picture.
h. METER MODE –This option adjusts the way the digital sensor inside evaluates the
brightness of the picture.
2. SETTINGS
a. LCD OFF –This option adjusts the time it takes for the LCD to automatically turn off.
b. AUTO POWER OFF –This option adjusts the time it takes for the CCR2000 to
automatically turn off.
c. TIME SETUP –This option lets you set up the time and date.
d. VOLUME –This option adjusts the volume of the CCR2000.
e. RESET SYSTEM SETTINGS –This option resets all options back to default.
f. FORMAT –This option formats the SD card, thereby erasing all it’s internal contents.
g. LANGUAGE –This option lets the user select the menu language between Chinese,
English, and Spanish.
h. STAMP –This option turns on or off the time stamp while recording the video.
i. BEEP SOUND –This option enables or disables the all sound the CCR2000 makes.
j. FIRMWARE VERSION –This option checks the firmware version of the CCR2000.
k. TIMEZONE –This option lets you check the timezone.
l. ABOUT –This option displays Sceptre’s information.