Schecter Damien Riot Quick start guide

Damien Riot
Wiring Diagram
For technical or warranty questions please email: [email protected]
Diagram copyright Schecter Guitar Research 2011
= ground.
Neck
Bridge
3-way switch settings
1 2 3
Master Vol
This symbol
is found where any ground connection
should be soldered.
Black & white wires from pickup
soldered together and insulated.
Green
Bridge Pickup:
EMG-HZ H4
Neck Pickup:
EMG-HZ H4A
Bare
Black & White
Black & white wires from pickup
soldered together and insulated.
Red
.022
Output Jack
Tip (hot output)
Sleeve (ground)
Volume
500k
Tone
500k
Black & White
Bridge
ground wire
EMGHZ
Green
Bare
3-way
lever switch
3
2
1
Red
Master Tone
21
3
3-Way
Switch
EMGHZ

c
d
a
b
radius
Scale Length: 648mm/25.5”
A: Width at Nut- 42mm
B: Width at Last Fret- 56mm
C: Thickness at 1st Fret- 20mm
D: Thickness at 12th Fret- 22mm
Radius: 355mm/14”
Damien Riot
Neck Specs:
Bridge Pickup
Name:
Model No:
Construction:
Magnet:
Description:
EMG-HZ H4
H4
Humbucker
Ceramic
Output: 13.65K ohm
Combining the power of the active
81 with the soul of a passive PAF,
the tone is well balanced, with tight
bass, glassy mids, and crunchy
highs. These great tonal features
are achieved by utilizing over
wound coils loaded with ceramic
bar magnets, all fully shielded for
minimal noise.
Neck Pickup
Name:
Model No:
Construction:
Magnet:
Description:
EMG-HZ H4A
H4A
Humbucker
Alnico V
Output: 13.65K ohm
The tone is very well-balanced,
with solid bass, pronounced
mids, and fat highs. These great
tonal features are achieved by
utilizing vintage wound coils
loaded with Alnico V bar
magnets, all fully shielded for
minimal noise.
Strings
6-String Guitar*
Tuning: E-A-D-G-B-E
Gauge: .046-.036-.026-.017-.013 .010
(EB Regular Slinky #2221)
*Changing to different string gauges and/or
alternate tunings may require minor neck/bridge
adjustments for optimal performance. For Schecter
setup tips refer to Schecter Setup Guide.

This model is equipped with a Graph Tech Black TUSQ XL
nut. The Black TUSQ XL delivers a rich and balanced tone
with big open lows and a noticeable increase in overall
sustain followed by a very balanced output from your strings.
Laboratory-proven to enhance harmonic content up to 200%
and sustain up to 16% and is engineered for maximum
vibration transfer. Designed to transfer the right frequencies
more efficiently from the string to the guitar body. Compared
to standard materials such as bone, micarta or corian, you'll
hear more harmonics with every note you play when you use
TUSQ XL on your guitar. As compared to TUSQ, you will
hear added midrange depth, and is impregnated with Teflon
to improve the tuning performance of the guitar.