Seaside Casual Sonoma 36 User manual
Page 1
070-Rev A
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | sales@seasidecasual.com
1PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware
are included using the Parts List below.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
Leg Assemblies
x 2
End Caps
80mm Hex Lag
Stretcher
Seat Assembly
x 1
Part Code: 4MMALLEN
Actual Size
4mm Allen Wrench
x 1
x 1
x 2
x 4
Sonoma 36” Bench
(070)
Part Code: 316-1/4-10-80HL
ASSEMBLY INSTRUCTIONS
4mm Allen Wrench (included); #2 Phillips Head Screwdriver;
Tools Required:
Part Code: 316-8X1-3/4PFDS
Actual Size
1-3/4” Phillips Head Screw
x 18
Actual Size
Page 2
070-Rev A
2ATTACH STRETCHER TO LEG
ASSEMBLIES
Attach stretcher to leg assemblies using
(4) 80 mm Hex Lags thru counter-bored
holes in Leg Assembly into pilot holes in
both sides of Stretcher.
Turn Seat Assembly upside down on a
clean, flat surface. Align base assembly
centered on the seat assembly. Secure
using (16) 1-3/4” Phillips Head Screws.
3ATTACH BASE TO SEAT AS-
SEMBLY
Insert End Caps into threaded insert in leg as-
sembly. Turn clockwise until snug. Continue
turning until in line with the stretcher.
4INSERT END CAPS
Secure end cap into legs with (2) 1-3/4” Phillips
Head Screws.
5SECURE END CAPS
