Protool SAW40 User manual
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
.
.
TABLE OF CONTENTS
Features and Specifications......................................................................................................................3
Preparing the Sawhorse..........................................................................................................................4-5
Mounting Workpiece or Sacrificial Wood..............................................................................................6
Constructing a Jobsite Table .................................................................................................................... 7
Storing the Sawhorse...............................................................................................................................8-9
Safety and Warnings................................................................................................................................... 10
General Maintenance.................................................................................................................................. 10
Warranty ............................................................................................................................................................11
WARNING: Be sure to read and understand all safety instructions in this manual, including all
safety alert symbols such as “DANGER”, “WARNING”, “CAUTION”, and “IMPORTANT” before using
this product. Failure to follow all instructions listed in the manual may result in electric shock,
fire and/or serious personal injury.
FEATURES AND SPECIFICATIONS
40"
6
1 3 2
28"
4
23.5"
5
SPECIFICATIONS INCLUDED FEATURES
HEIGHT 28" 1 2" X 4" Support arms
WIDTH 40" 2 Saddle trays
DEPTH 23.5" 3 Multipurpose straps
MAX WEIGHT CAPACITY 1000 lb. 4 Fold out material support brackets
MATERIAL Aluminum, Steel, Nylon 5 Folding legs with non-marring feet
PRODUCT WEIGHT 14.2 lb. 6 Built-in stacking tabs
3
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
PREPARING THE SAWHORSE
PUSH TO SLIDE
1. Place sawhorse on a flat and level surface with folded legs facing up.
2. Push to slide leg lock and unfold first set of legs from chassis.
3. Deploy first set of legs. Make sure cross brace is secured in place to ensure legs are
fully opened.
4. Unfold second set of legs and follow step #3.
4
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
PREPARING THE SAWHORSE
5. After both sets of legs are deployed, lift sawhorse in an upright position.
6. Ensure sawhorse is stable and both sets of legs are fully opened.
5
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
MOUNTING WORKPIECE OR SACRIFICIAL WOOD
1. Place workpiece or 2" X 4" lumber on top of chassis.
2. Rubber straps are located on both ends of sawhorse. Pull each strap over material and
secure strap to knob.
PRE-DRILLED
MOUNTING HOLES
NOTE: Pre-drilled mounting holes on saddle trays can also be used to attach sacrificial wood.
6
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
CONSTRUCTING A JOBSITE TABLE
Materials Required: (2) SAW40, (4) 2" X 4" Lumber, (1) Plywood sheet
1. Place 2" X 4" lumber on top of each chassis.
2. Rubber straps are located on both ends of sawhorses. Pull each strap over material and
secure strap to knob.
3. Place 2" X 4" lumber in support arms to connect sawhorse units.
4. Place sheet on top of sawhorses to create a workspace.
7
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
STORING THE SAWHORSE
1. Carefully flip sawhorse over so that legs are facing up.
FIRST SET OF
LEGS NEST INTO
CHASSIS FRAME,
OPPOSITE SIDE OF
LEG LOCK
LEG LOCK
2. Set of legs opposite from leg lock must be folded into chassis first.
3. Press on cross brace to bring legs together. Push legs down until fully nested into chassis
frame, opposite side of leg lock.
4. Repeat Step #4 to fold second set of legs. Push legs downs until fully nested into chassis
frame, same side as leg lock.
8
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
STORING THE SAWHORSE
5. Slide leg lock to secure legs in place for transport and storage.
9
10 FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
SAFETY AND WARNINGS
SAFETY INSTRUCTIONS FOR SAWHORSES
1. Use caution when folding or unfolding legs to limit any finger pinch points.
2. Place sawhorse on flat and level surface to keep from rocking or tipping.
3. Do not exceed the rated capacity on main frame table/chassis.
4. Ensure load is equally distributed.
5. Test the setup for stability before proceeding with work.
6. Never stack sawhorses to obtain extra height.
7. Do not sit or stand on sawhorse.
GENERAL SAFETY INSTRUCTIONS FOR POWER TOOLS
Using power tools of any kind can be dangerous if safe operating procedures are not followed.
Recognizing the hazards of each tool and using them with respect and caution will considerably limit
the possibility of personal injury. However, if safety precautions are ignored, personal injury can likely
result. Always use common sense - your personal safety is your responsibility.
1. Know your power tool. Read and understand the product manual and observe the warnings and
instruction labels affixed to the tool.
2. Properly ground all tools.
3. Keep guards in place.
4. Remove adjusting keys and wrenches.
5. Keep work area clean and dry.
6. Keep children away.
7. Never leave running machines/tools unattended.
8. Disconnect tools from service.
9. Use correct tools for the job.
10. Never force a tool.
11. Wear proper safety glasses/goggles and apparel.
12. Never stand or sit on tools.
13. Replace damaged components immediately.
14. Make sure your work platform is sufficiently sturdy to do the specific job at hand.
15. Properly anchor blade for job being done.
16. Use correct blade for job being done.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use a clean cloth to remove
dirt, dust, oil, grease, etc.
11
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
WARRANTY
3-YEAR LIMITED WARRANTY
This product is backed by a 3-year limited warranty. This warranty covers manufacturer
defects and workmanship. The warranty excludes misuse or abuse and normal wear and tear.
This warranty gives you specific legal rights, and you may have other rights, which vary from
state to state.
Contact manufacturer directly for questions/comments, technical assistance, or repair parts.
Call toll free at: 1-877-707-6449 (Mon - Fri 7:00 AM - 5:00 PM PT), or visit PROTOCOLEQUIPMENT.COM.
This manual suits for next models
1
Table of contents
