SeaView PMA-5-7LSS User manual

INSTALLATION
INSTRUCTIONS
For Seaview Stainless Steel Mount:
PMA-5-7LSS
Refer to website for most up to
date instructions and videos.

3/8 inch = 9.5mm
1.5 inch = 38mm
PARTS INCLUDED
X1 X1 X4
X1X1X1
X4 X4
X1
TOOLS NEEDED
3/8 inch = 9.5mm
X4
Sudbury Elastomeric
Marine Sealant is
recommended. To
purchase call 800-655-7922
or visit
www.seaviewglobal.com
1

1Using a straight edge make
sure that the mounting
surface is at.
2
3
4
Mark the four bolt holes
and center radar cable hole
using the foam gasket as a
template.
x4
Using a 3/8” drill bit, drill the four bolt holes. Use a 1-1/2” hole saw to
cut a whole for the radar cable.
Route the radar cable through the 1-1/2” hole you just cut. Place the
foam gasket onto the mounting surface, making sure that all bolt
holes line up.
2

5
6
Route the radar cable
through the Seaview mount
and through the hole in the
Top Plate.
Route the radar cable through the black rubber grommet. Insert the
rubber grommet into the lip of the Top Plate as shown below. Apply
marine adhesive sealant to the lip in the center hole of the Top Plate.
3

7Secure the Seaview mount assembly to the mounting surface with
your own bolts, and the supplied nylon shoulder washer. Apply
marine adhesive sealant around the shoulder washers and bolts.
8
9
Place the ADA-R1 Drill Template ontop of the Top Plate.
Mark the appropriate to drill for your radar make and model, then
drill the holes. Refer to the Seaview Top Plate installation instructions.
88
8
5
4
5
2
3
7
9
4
5
54
8
4
99
9
1
1
1
22
2
3
63
3
10
10
12
12
11
10
10
7
76
7
6
6
11
12
12
AD A-R1 Drill Template
11
1
11
4
x4
x4

10A If you are not using a Seaview Light Bar, use the provided
rubber Light Bar Plug.
If you are using a Seaview Light Bar, insert the Light Bar
into the hole. Refer to the Seaview Light Bar installation
instructions.
10B
11 Secure the radar to
the Top Plate using
your own hardware.
x4
5

12 When connecting the radar cable to the radar be sure to leave
some slack on the radar cable.
6

Tel: [phone]
www.seaviewglobal.com
EUROPEAN OFFICE
Tel: [phone]
www.seaviewprogress.com 1-072318