Seitz Roundshot Livecam Generation 4 User manual

Installation
manual

•
•
•
•
•
•
•
•
•
•

Very important: The mast must be connected by cable (yellow/green) to the
ground.

•
•
•Please provide the following network data to Roundshot prior to shipping:
•IP through DHCP (automatically assigned by switch/router/network)
•Fixed IP (IP, subnet mask + gateway + DNS1 + DNS2)

Please confirm to Roundshot prior to shipping that the camera will be
connected through wifi or through 3G/4G.

•The mains adaptor is fixed inside the box with 4 screws
•To connect the cable open the screws and remove the mains adapter
•Connect the cables
•Fix the mains adaptor again inside the box using the 4 screws
Very important: The mains adaptor casing must be connected by cable
(yellow/green) to the ground.

•
•
•

•
•
•Very important: The mast needs to be grounded using a cable (yellow/green).
When installing the box there is no need to open it –just attach it on the mast
and connect the cables

•
•
•
•

•
•
•
o
o
o
o

Once the Uploader is activated with an upload password, it will automatically
be set as access password to the camera.
If the upload configuration of the Livecam has already been prepared by
roundshot prior to shipping, please contact roundshot to obtain this password.
roundshot_00044bdeda13